Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end
Rear wheel cylinder 19mm - Panhard 24 équipé frein à tambours - 07/1964 à fin de série
(57,60 € HT)
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
(26,00 € HT)
copy of Set of segments STD 85.50, oversize 0.50 mm Renault Fregate
Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 52 products.
SUMB Marmon master cylinder plug kit
For Simca Sumb Mamon, Citroën U23 and other heavy goods vehicles.Kit of 3 caps + 3 copper gaskets for master cylinder.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.
(19,15 € HT)
SUMB Marmon disc clutch
Clutch disc reconditioned, in standard exchange for SUMB Marmon. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(116,00 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Set of 4 SUMB Marmon brake shoes
" Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes. (non ...
(176,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 34.9mm - SUMB Marmon
For Simca SUMB Marmon and other heavy-duty derivatives.Complete rear wheel cylinder 1'3 / 8 (34.93 mm).
(119,60 € HT)
Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle
Adaptateur freinage 1/2-20 UNF mâle par 3/8 24 filets femelle
(10,50 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
(5,15 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(8,85 € HT)
Master cylinder SUMB Marmon
For Simca SUMB Marmon, Citroën U23 and other heavy goods vehicles.Complete master cylinder. 3-hole fixing. 3 side outlets and 1 at the end.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.Warning: ...
(169,00 € HT)
Front brake cylinder 38.1 mm - SUMB Marmon
For Simca SUMB Marmon and other heavy-duty derivatives.Complete front wheel cylinder d 38mm.
(99,85 € HT)
Flexible de embrayage 300 mm SUMB Marmon
Brake hose Length 300 mm. Entry 7/16 e 16 f / p for SUMB Marmon. Please check the correspondence with your model before ordering.Outside diam: 15.6 mmInternal diam: 10mmFor other models, please call us
(36,00 € HT)
Ecrou
(4,50 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,20 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
(42,00 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(180,00 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(155,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(128,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
(66,00 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
(29,50 € HT)
Brake hose 430 mm SUMB Marmon
Brake hose Length 430 mm. Entry 7/16 e 16 f / p for SUMB Marmon. Please check the correspondence with your model before ordering.For other models, please call us
(36,00 € HT)
Brake hose 380 mm SUMB Marmon
Brake hose Length 380 mm. Entry 7/16 e 16 f / p for SUMB Marmon. Please check the correspondence with your model before ordering.Outside diam: 15.6 mmInternal diam: 10mmFor other models, please call us
(35,00 € HT)
Banjo adapter for SUMB Marmon master cylinder
Adapter for connecting the inlet of an 18 mm master cylinder to the original tube that goes to the jar. When the old models are in diam. 22mm, the adapter is essential to connect the tube from the jar.The set consists of: 2 copper gaskets, a ...
(40,95 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(16,00 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
(15,00 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
(9,96 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(29,00 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Adapter connection 1/2 UNF female - 3/8 UNF male
Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads
(9,90 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(6,08 € HT)
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)