copy of Tailor-made front or rear brake hose
Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Non-contractual image.
(35,00 € HT)
copy of Tailor-made front or rear brake hose
Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Non-contractual image.
(35,00 € HT)
turbine (occasion) Aquilon
(55,00 € HT)
Embrayage - kit mécanisme diaphragme +disque +butée - Citroen Traction 11cv
(695,00 € HT)
Reconditionnement expédition
(40,00 € HT)
copy of Cartouche filtrante filtre à air - Peugeot 404 injection
(46,00 € HT)
copy of Cartouche filtrante filtre à air - Peugeot 404 injection
(130,00 € HT)
copy of Cartouche filtrante filtre à air - Peugeot 404 injection
(47,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(8,33 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(74,17 € HT)

Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,17 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(17,50 € HT)
Braking There are 42 products.
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(7,50 € HT)
Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
(32,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(55,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(8,33 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
(29,50 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
(66,00 € HT)
Set of 4 relined brake shoes Panhard Dyna x86
Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...
(92,00 € HT)

Brake switch - STOP - spring-loaded
Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.
(24,92 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(5,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
1/2 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(8,84 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(4,58 € HT)
Front brake cylinder 25.4 mm - Panhard Dyna - April 1950 and +
Front L and R brake cylinder Panhard Dyna - April 1950 and +. D 1 "(25.4 mm).Sold individually (1 cylinder per wheel)
(38,33 € HT)

Master cylinder 25.4 mm Panhard Dyna X 86 - April 1950 and +
Master cylinder 25.4 mm Panhard Dyna - April 1950 and +Piston 1 inch or 25.4 mm1/2 output 20 f per inchEntry about 17 mm60 mm center distance for M 8 screws
(47,58 € HT)

Front wheel brake hose - 380 mm Panhard Dyna
Front wheel brake hose - 380 mm Panhard Dyna - 17 mm male end - for Front wheel L or D. Made in France
(25,00 € HT)
Rear wheel brake hose - 250 mm Panhard Dyna
Rear wheel brake hose - 250 mm Panhard Dyna - 17 mm male end. Made in France
(23,50 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Brake switch - STOP - 10x100 conical - DOT
Brake switch. STOP light function - 10x100 - for DOT liquid
(23,00 € HT)
Brake switch - STOP - 10x100 conical - Silicone
Brake switch. STOP light function - 10x100 - for Silicone
(23,00 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
(42,00 € HT)
Rear brake cylinder 19 mm - Panhard Dyna X 86 - 04/1950 at the end
Rear brake cylinder Ø 19 mm - Panhard Dyna X 86 - 04/1950 to endSteel body length: 54 mmFlange hole: 31.8 mmFixing center distance: 25 mm - M6 mm thread
(49,50 € HT)

Rear brake cylinder 22 mm - Panhard Dyna X 86 - light truck
Rear brake cylinder 19 mm - Panhard Dyna X 86 - 04/1950 to end
(69,80 € HT)

Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Set of 4 relined REAR brake shoes - Panhard
Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...
(92,00 € HT)

copy of Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(128,00 € HT)
Adapter connection 1/2 UNF male - 7/16 UNF female
Adapter connection 1/2 UNF male - 7/16 UNF female
(9,96 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(29,00 € HT)