Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end
Rear wheel cylinder 19mm - Panhard 24 équipé frein à tambours - 07/1964 à fin de série
(57,60 € HT)
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
(26,00 € HT)
copy of Set of segments STD 85.50, oversize 0.50 mm Renault Fregate
Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
bodywork There are 37 products.
Wiper sole kit - Ford Vedette 1954
Kit semelle pour essuie glace Ford Vedette 1954 - Fabrication française soignée - Exclusivité techni-Tacot Comprend : 2 x semelles essuie glace
(11,90 € HT)
Wiper - Stainless steel squeegee blades 205 mm x 2
Stainless steel wiper blades, squeegee type 20.5 cm . Mounts with the adjustable arms on sale HERE
(15,00 € HT)
Wiper - Stainless steel brushes x 2 - 285 mm
Stainless steel wiper blades. Length 285 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
(29,45 € HT)
Windshield wiper - Stainless steel squeegee blades 230 mm x 2
Stainless steel wiper blades, 23 cm squeegee type. Mounts with the adjustable arms on sale HERE. Sold by 2 squeegees
(16,00 € HT)
Windscreen wiper - Stainless steel brushes x2 - 220 mm
Stainless steel wiper blades. Length 220 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
(25,50 € HT)
Windscreen wiper - Stainless steel brushes x 2 - 260 mm
Stainless steel wiper blades. Length 260 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
(26,16 € HT)
Windscreen wiper - adjustable arms x 2 - 5 mm axle
Stainless steel wiper arm. Adjustable length from 20 to 30 cm. Tightening on 5 mm axle - Sold by 2
(35,00 € HT)
Windscreen seal Ford Vedette 1953/54
Welded windscreen seal - without central upright - for Vedette 1953 and 54. Non-contractual photo
(95,00 € HT)
Windscreen seal Ford Vedette 1949/52 - with central pillar
Welded windscreen seal - with central upright - for Vedette 1949 to 52. Photo no contractual
(170,00 € HT)
Top seal on Ford Vedette apron
Gasket to be glued to the top of the apron and allowing sealing with the cover (close to the windshield), length approximately 1.50m. Dimensions 10x20 mm
(9,00 € HT)
Soundproofing with adhesive 1m2
Sound insulation in heavy plates. Allows you to lower the sound level. Self-adhesive (film to be removed before installation). Plate 200 x 500 mm. The package contains 10 plates, i.e. 1 m2 in total
(72,80 € HT)
Soles kit for handles and locks - Ford Vedette coupe / cabriolet
Soles kit for Ford Vedette coupe and convertible. French manufacture by Techni-Tacot.Including:2 x soft soles for exterior door handles2 x soft soles for exterior door lock
(30,30 € HT)
Soles kit for handles and locks - Ford Vedette berline and Vendome
Soles kit for Ford Vedette berline and Vendôme. French manufacture by Techni-Tacot.Including:4 x soft soles for exterior door handles2 x soft soles for exterior door lock
(35,50 € HT)
Seal 4 doors Ford Vedette Comete Vendome
Set of 4 door seals for Ford Vedette, Comète, Vendôme etc.
(88,00 € HT)
Rear window seal Ford Vedette Coupe
Rear window seal, welded, for Coupé Vedette.
(114,30 € HT)
Rear window seal Ford Vedette 1949-52
Rear window seal, welded, for Vedette Saloon 1949 to 52.
(118,65 € HT)
Poissy badge front cover Simca Versailles 6V
Front hood badge. Can be assembled according to year on Versailles (Ford and Simca), Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2.Only the red badge is delivered
(40,00 € HT)
Poissy badge for Simca Versailles rear trunk
Rear trunk badge. Can be assembled according to year on Versailles (Ford and Simca), Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2.Only the red badge is delivered
(40,00 € HT)
Plate equipped for front left or right turn signal - Ford Vedette
Plate fitted for front left or right turn signal - Ford VedetteSupplied with the cork gasket, sockets with wires.Delivered without lamp.
(128,00 € HT)
Kit of 2 x wiper soles - Ford Vedette from 1949 to 1952
Sole kit for Ford Vedette from 1949 to 1952. Made in France by Techni-Tacot.Including:2 x wiper soles.
(11,90 € HT)
Kit of 2 x platinum rear light bases - Ford Vedette from 1949 to 1952
Sole kit for Ford Vedette from 1949 to 1952. Made in France by Techni-Tacot.Including:2 x soles for rear light plate.
(35,50 € HT)
Gray needle button for Ford Vedette 53 and 54 dashboard
Resin button with Ford Vedette gray lacquered needle, with thread insert, as original.Sold individually. Please note this model with anti-rotation needle screw is intended for Fog and Heating controls (1953 to 54)
(20,92 € HT)
Gray gear lever knob for Ford Vedette dashboard
Gear shift knob, in Ford Vedette gray lacquered resin, with thread insert, as original
(40,60 € HT)
Gray button for Ford Vedette dashboard
Ford Vedette gray lacquered resin knob, with thread insert, as original.4 to 6 pieces for Vedette from 1949 to 1952. Sold individually.Attention model with anti rotation needle screw for anti fog and heating (1953 to 54)
(17,30 € HT)
Front lights kit 2 x soles - Ford Vedette - 1949 to1952
Sole kit for Ford Vedette - 1949 to 1952. French manufacture by Techni-Tacot.Including:2 x soles for front light plate.
(35,70 € HT)
Ford Vedette side window or quarter window seal
Seal for quarter panel side window, welded, 2 per vehicle - Sold individually. Mounts on Ford Vedette, Abeille, Vendôme
(52,00 € HT)
Ford Vedette refabrication steering wheel
Steering wheel for Ford Vedette, Abeille, etc.Refabrication from the original frame, careful and quality production. Delivered ready to paint, without ring or badge. The shipment is made AFTER receipt of your dilapidated copy (chipped plastic, ...
(432,00 € HT)
Clip-on exterior mirror - parabolic mirror
Clip-on mirror for mounting on door pillar. Supplied with 2 tightening screws + key. Parabolic mirror allowing a greater viewing angle than a flat mirror
(36,00 € HT)
Circle Steering Wheel for Ford Vedette
Circle Steering Wheel for Ford Vedette,
(580,00 € HT)
bras x 2 inox fil axe 5 mm
Bras d'essuie glace inox. tige filaire - Serrage sur axe 5 mm. Se monte avec balais type raclette ou lame - Vendu par 2
(48,00 € HT)
Boot handle sole kit - Ford Vedette 1954 - Berline / Coupé / Cabriolet
Sole kit for trunk handle Ford Vedette 1954 - Berline / Coupé / Cabriolet - Neat French manufacturing - Techni-Tacot exclusivityUnderstand :1 x rear trunk handle sole
(26,58 € HT)
Boot handle sole kit - Ford Vedette 1949 -53 - sedan / coupe / cabriolet
Sole for Ford Vedette sedan, coupe, convertible. French manufacture by Techni-Tacot.Including:1 x sole for the trunk handle.
(26,68 € HT)