Fuel gauge - Peugeot 404 all models

Fuel gauge - Peugeot 404 all models

THERMOSTABLE front brake cylinder - set of 4 - Peugeot 404

Set of 4 front brake cylinders Thermostable L or R - Peugeot 4041965 to 69

€561.60 TTC
(468,00 € HT)

Additional kit for flashing on 190SL - Easy Drive

Accessories for flashing information transmission via wipers on brass bushings.

Fuel gauge - Peugeot 204 304

12V fuel gauge for Peugeot 204 and 304. Delivered as pictured.

kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem

Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.

Rear brake cylinder - Ø19 mm - Simca 1000

Rear wheel cylinder L or R Ø 19 mm

€55.56 TTC
(46,30 € HT)

Valves x 4 - ECH Ø 35x9x138 domed - Citroen P34 P36 10cv

Set of 4 ECH valves Ø 35x9x138 convex - Citroen P34 P36 10cv

Pistons liners kit Ø 70.00 mm Renault 688.01 to 13 - 1108 cc

Pistons liners kit Ø 70.00 mm Renault engine type 688.01 to 688.13 - Cleon block 1108 cm3

Connecting rod bearings set - Peugeot 203 - Peugeot D3 D4 standard dimension

Set of bearings for 4 Peugeot D3 D4 connecting rodsStandard origin dimension. French made.

end connection for master cylinder

Stop contactor connection

€11.88 TTC
(9,90 € HT)

set of 2 Peugeot D3 D4 windscreen seals

Set of 2 windscreen gaskets for Peugeot D3 or D4.

Front hub kit - Renault Fregate

Kit for front wheel hub. Includes: - 1 internal tapered bearing - 1 external tapered bearing The set is valid for a front wheel.

Windscreen seal Renault Prairie Colorale Goélette Galion

Windscreen seal for Renault Prairie Colorale, Goélette, Galion, R2065, R2066 and derivatives. Length 4 ml, can be cut to the size of your model (with a cuter)

Silent block for stabilizer bar Ø 16 mm Simca Versailles

Silent block for connection between stabilizer bar and suspension pivot mounted on Simca Trianon, Versailles, Régence and Malry I Stabilizer bar thread in 16 mm - Silent block location diameter = 20.7 mm p > The price allows to redo only ...

joint pare brise Anglia

Ford Anglia front wheel bearing kit

Bearing kit for a front wheel.

High hose on Ford Anglia main radiator

High hose for main radiator. Ford Anglia 105E or 106E

Stainless heating steel T hose for Ford Vedette

Stainless steel T allowing the heating return to be connected to the lower main radiator hose. Ford Vedette, Vendôme or other vehicle using this system.

Head gasket 1.6 mm Ford Vedette standard

" Cylinder head gasket for Ford Vedette 1949 to 1954. One side all copper, the other with copper hems, thickness 1.6 mm approximately Measured cylinder head thickness Head gasket type 37.3 mm (original) 1.6 mm standard gasket from 37.0 ...

Ford Vedette hood stopper

Front cover stopper - set of 4.

Kit 2 x Ford Vedette pivots

" Ford Vedette front pivot repair kit for all models, Bee, Comet, Monte Carlo, Vendôme. Includes 2 pins and 4 bronze bushings. (for 2 wheels). The 2 axes are in treated steel for a much greater hardness than ordinary commercial products. ...

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

Biellette direction (jeu de 2) - Renault 4cv 2nde génération et Dauphine

Lower radiator cooling hose - Peugeot 404 injection

Lower radiator cooling hose - Peugeot 404 injection

RIGHT rear brake cylinder 20.6 mm - Renault Dauphine Floride

RIGHT rear brake cylinder 20.6 mm - Renault:Dauphine - Floride - Gordini - OndineR1090 -1091 -1092Ondine from beginning to September 1963

€60.42 TTC
(50,35 € HT)

Water pump - 1 outlet - Renault 4cv - Dauphine

Water pump - 1 outlet - Renault 4cv - Dauphine

Front axle repair kit all models - Peugeot 404 after 63

Front axle repair kit for all models - Peugeot 404 after 63The set includes all parts visible in the photo

Master cylinder 22mm - Peugeot 404 ALL models except Thermostable

Brake master cylinder 22mm - Peugeot 404 ALL models except Thermostable - Outlet Ø 1/2 20 f / p

€88.62 TTC
(73,85 € HT)

Engine gaskets set Ø 90 - Citroen DS 21 - Dsuper 5 - 21 IE

Engine gaskets kit Citroen DS 21 - Dsuper 5 - 21 IE. From 09/1968 to end of productionBore Ø 90 mm

Clip x 20 for sticks - Peugeot 204 304

Set of 20 plastic clips for rods - Peugeot 204 304 - Count 3 sets of 20 for a complete car

Front brake cylinder L - Ø 22 mm - Simca 1000

Front wheel cylinder L - Ø 22 mm

€88.02 TTC
(73,35 € HT)

liner Ø 55 semi finished int 54.5 - Citroen Trefle 5cv

liner Ø 55 mm delivered semi finished in Ø 54.50 - long 170 mm - Ø 59 - collar Ø 61 - High collar 6 mm Citroen Trèfle 5cv - sold individually

Peugeot D4 front hub kit

Attention: non-contractual photo. Kit for 1 front hub Peugeot D4B (check that your bearing dimensions correspond to those indicatedIncludes:1 x 55x100 bearing1 x 45x100 bearing2 x waterproof ringKit for one side

Ignition - protected harness Peugeot D3 D4 petrol

Ignition harness for Peugeot D3 D4 petrol engine.Current quality manufacture in red silicone.

Rear shock absorbers Simca Aronde 51 to 58

Rear shocks for Simca Aronde from 1951 to 1958 (spring leaves)Record brand, 100% conforms to the original assembly.Price of the pair.

Repair kit 2 front shocks - 44mm - Peugeot 203 or 403

" Repair kit for Peugeot 203 and 403 front shock absorbers. The kit allows you to renovate 2 FRONT shock absorbers, including: - 4 sealed bearings - 4 sealing rings - 2 silent blocks of arm length 44 mm (there is a version in 38 mm) - 1 can of ...

Silent block transfer case Renault Prairie R2087 Goelette

Silent block for transfer case (4x4 vehicle). 4 silent blocks per vehicle - sold individually.

Spinnaker seal ring 38x73 - Simca Versailles Chambord

" Sealing ring on bridge nose. Supplied with adapter ring. About 38 x 73 mm (non contractual photo) "

joint lunette arriere Ford Anglia

Rear wheel bearing kit Ford Anglia

Bearing kit for a Ford Anglia 105 and 106E rear wheel.

Ford Anglia low hose on main radiator

Low hose on main radiator. Ford Anglia 105E or 106E

High hose for Simca Versailles Chambord

High hose for V8 Simca Versailles Chambord etc. (2 per engine) Sold individually. Diam 40 mm (elbow side) - Diam 35/40 mm (straight length) - Straight part length 580 mm Elbow length 130 mm. Approximate values

Head gasket 2 mm solid copper Ford Vedette

Solid copper cylinder head gasket. 2mm thickness. Used with planed cylinder head. Tightening to 5m.kg. Mandatory installation with aerosol sealant, available here a>. Measured cylinder head thickness Head gasket type 37.3 mm ...

Windscreen seal Ford Vedette 1953/54

Welded windscreen seal - without central upright - for Vedette 1953 and 54. Non-contractual photo

Ford Vedette gearbox support

Support for gearbox cross member. You need 2 per vehicle. Sold individually.

Front brake cylinder 28.6 mm - 1949 to 52 Ford Vedette

Front wheel cylinder Ford Vedette model from 1949 to 1952. Piston diameter 1 "1/8 (28.57 mm). Entry 7 / 16th

€57.60 TTC
(48,00 € HT)

Flexible front brake hose 380 mm - Citroen Traction

" Flexible front brake hose length 380 mm. (Attention depending on assembly exists in length 470 mm (available on the Shop) Traction 7.11 and 15 hp - U23 and HY "

Master cylinder 22mm Simca Versailles Chambord

Complete master cylinder D 22 mm. For Simca V8 (Versailles, Chambord, Marly, Ariane 4 and Ariane 8 etc.) before April 1960. Output 1/2 20f / p

€88.61 TTC
(73,84 € HT)

Upper radiator cooling hose - Peugeot 404 injection

Upper radiator cooling hose - Peugeot 404 injection

Set of 2 brake shoes Citroen Trefle

Set of 2 relined  brake shoes, in standard exchange (Send us your set before shipping the new one).High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non contractual photo)

€42.00 TTC
(35,00 € HT)

Red indicator light 12 v - Ø 12 mm - alternator charge indicator

Red indicator light 12 v - Drilling at 12 mm - alternator charge indicator

Set of 4 relined REAR brake shoes - 4CV

Set of 4 relined brake shoes (Front or Rear) 195 mm x 30 mm in standard exchange for 4 HP.Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums.Shipping upon receipt ...

€108.00 TTC
(90,00 € HT)

LEFT rear brake cylinder 20.6 mm - Renault Dauphine Florida

LEFT rear brake cylinder 20.6 mm - Renault:Dauphine - Floride - Gordini - OndineR1090 -1091 -1092Ondine from beginning to September 1963

€60.42 TTC
(50,35 € HT)

connecting rod bearings dimension 0.25 engine 839 - renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Thermostable rear brake cylinder Ø 17.50 mm - Peugeot 404

Rear wheel cylinder Thermostable L or R Ø 17.50 mm - Peugeot 4041965 at the end of production

Shock absorber x 2 - front - Panhard 24 BT

Pair of front shocks - Record brand - Panhard 24 BT

Front brake cylinder D - Ø 22 mm - Simca 1000

Front wheel cylinder R - Ø 22 mm

€88.02 TTC
(73,35 € HT)

liner Ø 63 semi finished int 62.5 - Peugeot 201

liner Ø 63 mm delivered semi finished in Ø 62.50 - long 180 mm - Ø 67 - collar Ø 68 - High collar 6 mm - Peugeot 201 - sold individually

Peugeot D4 rear hub kit

Attention non-contractual photo. Kit for 1 rear hub Peugeot D4B (check that your bearing dimensions correspond to those indicated)Includes:1 x 20x52 double row bearing1 x bearing 17x471 x waterproof ringKit for one side

Rear brake cylinder -25.4 mm - incoming cone - Peugeot D3A ET D4 - 04/64 a 05/65

Rear wheel cylinder d 25.4mm, Peugeot D3A - D4 D4A D4B - 04/64 to 05/65.Model with cone entering the liquid inlet well. Non contractual photo.

€50.40 TTC
(42,00 € HT)

Set of 4 Peugeot D3 D4 spark plugs

Set of 4 NGK spark plugs for Peugeot D3 D4 petrol enginesCompatible with SP 95 or Sp 98 fuel

Citroën Traction rear shock absorbers

Set of 2 RECORD shocks - Rear mounting Citroen Traction

Front shock absorbers Simca Aronde 51 a 58

Front shock absorbers for Simca Aronde from 1951 to 1958 (spring leaves)Record brand, 100% conforms to the original assembly.Price of the pair.

Renault Fregate 1953-54 rear shock absorbers

Pair of rear shock absorbers for Renault Frégate from 1953 to 1954.Mounting threaded rod up - eyelet down.Extended = 495 mm (distance measured at the center of the eyelet and at the shoulder of the rod below the thread on the body side)Compressed ...

Simca Versailles rear wheel hub kit

" Rear hub repair kit for one wheel: Simca Trianon, Versailles, Régence, Marly 1 1 bearing 1 adapter spacer 1 depth wedge The shim and the spacer are placed towards the wheel, flat side of the bearing towards the center of the bridge (see photo n ...

Ford Anglia thermostat or calorstat

Thermostat (or calorstat) located at the top outlet of the cylinder head.

Front brake cylinder type G - Ford Anglia

Front wheel cylinder type G - Sold individually. (The photo allows you to recognize the model - a white letter is written on the part). You need one cylinder type G and one type D per front wheel.

Low hose for Simca Versailles Chambord

Low hose for V8 Vedette.

Oil filter foot gasket Ford Vedette Simca

Gasket to be placed between the central crankcase and the base of the oil filter. "Y" shaped.

Rear window seal Ford Vedette Coupe

Rear window seal, welded, for Coupé Vedette.

Ford Vedette steering ball joint cover

Rubber protection for steering ball joint - 4 per vehicle - Sold individually

Rear brake cylinder 25.4 mm - 1949-53 Ford Vedette

Rear wheel cylinder d 25.4mm, Ford Vedette (1949 to August 1953), Vendôme, Comète, Monté Carlo, Abeille. Right pipe entry. NON-CONTRACTUAL photo.

€50.40 TTC
(42,00 € HT)

Front brake cylinder Ø25.4mm Simca Versailles

Front piston wheel cylinder 25.4mm

€87.36 TTC
(72,80 € HT)

Rear brake cylinder L or R (outgoing) 23.8 mm - Simca Chambord

" Rear wheel cylinder. Left mount or Right - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8. Diameter: 23.81 mm. Version with cone protruding from the bottom of the thread at the liquid inlet. See detail photo. "

€62.40 TTC
(52,00 € HT)

Front shock absorber gaiter - Peugeot 404 - series 2

Set of 4 rear brake shoes Citroen Trefle

Set of 4 rear brake shoes relined, in standard exchange (Send us your set before shipment of the new one).High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non contractual ...

€84.00 TTC
(70,00 € HT)

Front brake cylinder RIGHT 22 mm - Renault Dauphine Floride

Front RIGHT brake cylinder 22 mm - Renault:Dauphine - Floride - Gordini - OndineR1090 -1091 -1092Ondine from beginning to September 1963

€72.00 TTC
(60,00 € HT)

Water pump 4 outlets - Renault Dauphine

Water pump 4 outlets - Renault DauphineDelivered with the pulley with 4 fixing

Sealing ring for 1/2 axle inner axle - 50 x 77 - Citroen U23

Sealing ring for 1/2 internal axle shaft - 50 x 77 - Citroen U23.Mounts in the bridge trumpets - Sold individually - (2 per vehicle are needed)

Tapered bearings kit + front hub spinnaker - Simca 6

Kit composed of:2 x tapered bearings1 x waterproof ring (sp)Allows to equip 1 front hub - Simca 6

Shock absorber x 2 - rear - Panhard 24 BT

Pair of rear shock absorbers - Record brand - Panhard 24 BT

Master cylinder - Ø 22 mm - Simca 1000

Master cylinder - Ø 22 mm

€147.30 TTC
(122,75 € HT)

Valves x 4 - ADM Ø 37x9x138 - Citroen P34 P36 10cv

Set of 4 ADM valves Ø 37x9x138 - Citroen P34 P36 10cv

Segment set Ø 72 mm Simca 2.5x2.5x2.5x4 - 4cyl

Segment set Ø 72 mm Simca 2.5x2.5x2.5x4 - 4cyl

Peugeot D4 gearbox outlet seal

Sealing ring ("spinnaker") for Peugeot D4 gearbox outlet43x60 mm

Brake master cylinder - Ø 28.5 mm Peugeot D4 - 11/57 to end

Brake master cylinder Ø 28.5mm, Peugeot D4 D4A D4B - 11/57 to end. Non contractual photo.

€111.60 TTC
(93,00 € HT)

Mechanism clutch Peugeot D3 D4

Clutch mechanism reconditioned, in standard exchange. Mounted on Peugeot D3 D4, etc ...Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - ...

€276.00 TTC
(230,00 € HT)

Renault Fregate 1955-60 rear shock absorbers

Pair of Record rear shock absorbers for Renault Fregate from 1955 to 1960 all models (Amiral, Domaine, Manoir, Grand Pavois).Mounting threaded rod up and down.

Peugeot 203 lower hose before 05/55

Lower hose before 05/1955. For Peugeot 203. (diam 40mm approximate overall length 27cm)

Repair kit 2 rear shock absorbers Peugeot 203 or 403

Repair kit for Peugeot 203 and 403 rear shock absorbers.Includes:- 4 sealed bearings- 4 sealing rings- 2 silent arm blocks- 1 oil can for shock absorber.The kit allows to renovate 2 REAR shock absorbers.

Suspension pivot Simca Versailles Chambord Ariane

Standard ball joint replacement for the lower suspension pivot. The arm is delivered with the ball joint mounted and ready for reassembly. Assembly for Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord, Présidence and Ariane. The ...

€352.00 TTC
(352,00 € HT)

Electric Easy Drive power steering kit

Revue Technique Rosengart LR - RTA

silent block axle suspension Renault Prairie R2087 Goelette

Silent block for front and rear suspension blades and binoculars. 12 in total per vehicle except for those equipped with the large steering damper (quantity = 11) Dimensions: d int 16 x D ext 32mm - L 66 x L60mm

Set of 4 rear brake shoes Peugeot 203

Set of 4 rear brake shoes relined, in standard exchange. Peugeot 203. assembly (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets which damage the drums. Pickled and ...

€98.40 TTC
(82,00 € HT)

Ford Anglia water pump with pulley bracket

Water pump.

Front brake cylinder type D - Ford Anglia

Front wheel cylinder type D - Sold individually. (The photo allows you to recognize the model - a white letter is written on the part). You need one type D cylinder and one type G per front wheel.

Heater hose

16mm internal hose - length 1m, for heating circuit.

Disc clutch Peugeot 203 403

Reconditioned clutch disc, in standard exchange for Peugeot 203 403. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed) (Depending on the year, non-contractual photo)

€103.20 TTC
(86,00 € HT)

Aerosol gasket for cylinder head

Sealing spray varnish to be sprayed on both sides of a cylinder head gasket. Improves sealing, essential with solid copper gaskets (any thickness)

Rear window seal Ford Vedette 1949-52

Rear window seal, welded, for Vedette Saloon 1949 to 52.

Grease cover on lower triangle wheel side - Ford Vedette

Rubber ring for Ford Vedette front axle - on lower pivot - 4 per vehicle - Sold individually Ford Ref = 3193

Master cylinder complete - 25.4 mm - Renault Fregate

" Master cylinder complete with bellows. Complete. Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "

€62.40 TTC
(52,00 € HT)

Master cylinder Ford Vedette 25.4 mm - 1950-54 - Vendome Comete

" Ford Vedette d25.4 mm master cylinder - all models 1950 to 1954, Comète, Monte Carlo, Abeille, Vendôme. Attention special model for year 1949, also available in our shop. Delivered complete with bellows. "

€200.82 TTC
(167,35 € HT)

Front brake cylinder Ø 28.5 mm - without bleeder (L and R) - Simca Ariane

Front wheel brake cylinder, without bleeder. Right or Left mounting. Diameter 28.57 mmr - Simca Ariane 4 and Ariane 8 - Simca 1300 until sept. 1965.

Rear brake cylinder 18.2 or 19 mm Simca Versailles

Rear wheel cylinder (19 mm piston) can be used to replace models with 18.2 mm piston. The assembly is done in place and allows optimal braking.

€74.88 TTC
(62,40 € HT)

Front shock absorber gaiter - Peugeot 404 - series 1

Front LEFT brake cylinder 22 mm - Renault Dauphine Florida

Front LEFT brake cylinder 22 mm - Renault:Dauphine - Floride - Gordini - OndineR1090 -1091 -1092Ondine from beginning to September 1963

€71.16 TTC
(59,30 € HT)

Rear brake cylinder 19 mm - Renault 4CV - 02/53 to 01/1956

Rear brake cylinder 19 mm - Renault 4CV - 02/53 to 01/1956

€61.20 TTC
(51,00 € HT)

Gaskets for water pump 4 outlets - Renault Dauphine

2 Gaskets for 4 outlets water pump - Renault Dauphine

connecting rod bearings standard engine rating 839 - renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Oil seal ring for rear hub 68 x 85 - Citroen U23

Oil seal for rear hub 68 x 85 - Citroen U23The original width is around 29 mm - we recommend fitting these 2 rings in duplicate to strengthen the seal.Sold individually.

Spinnaker ring 40 x 57 x 10

Right bearing kit + rear hub spinnaker - Simca 6

Kit composed of:1 x straight bearing1 x waterproof ring (sp)Allows to equip 1 rear hub - Simca 6

Front brake spring kit - hydrovac - Peugeot 404 - 10/67 a 69

Hydrovac brake spring kit - front wheels - Peugeot 404 10/67 to 69

Grease cover bellows for Simca Aronde pivot

Grease cover bellows for Simca Aronde pivot

Front brake hose - 295 mm - Simca 1000

Brake hose for Simca 1000 - L 295 mm

Valves x 4 - ADM ECH Ø 35x9x138 - 60 degrees - Citroen C4G C6G

Set of 4 ADM ECH valves Ø 35x9x138 - 60 degrees - Citroen C4G C6G

Rear brake cylinder -25.4 mm - cone protruding - Peugeot D4 - 04/64 to 05/65

Rear wheel cylinder d 25.4mm, Peugeot D4 D4A D4B - 04/64 to 05/65.Model with cone coming out of the liquid inlet well. Non contractual photo.

€58.80 TTC
(49,00 € HT)

Clutch disc 200 mm - Peugeot D3 D4

Clutch disc reconditioned, in standard exchange for Peugeot D3 D4. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€103.20 TTC
(86,00 € HT)

Rear shock absorber x 2 Citroen HY 70 and +

Pair of Record rear shocks. Mounts on Citroen HY from 1970 and until the end.

Front shock absorbers 1951-60 renault Fregate

Pair of Record front shock absorbers for Renault Fregate from 1951 to 1960 all models (Amiral, Estate, Manor, Grand Pavois).Mounting eye up - eye down.

Peugeot 203 upper hose before 05/55 and D3 D4

Upper front hose 05/1955. For Peugeot 203 and D3 D4Dimensions:D 45 mm and D 40 mmlength of "L" 200 x 140 mm approx.

Set of 4 Rosengart brake shoes

Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipping the new one) High performance friction, applied by industrial bonding, no more rivets which damage the drums. Micro blunt brake shoes.

€120.00 TTC
(100,00 € HT)

silent block pulling Renault Colorale Prairie

Silent block for tie rod. Fitted only on Renault Colorale 4x4 version 11cv. 8 per vehicle. Dimensions: d int 18 x D ext 34 mm L ext 65 mm x L int 71 mm

Ford Anglia hydraulic flexible clutch

Hydraulic hose for clutch.

Ford Anglia rear brake cylinder

Left or Right rear wheel cylinder. 2 per car - Sold individually.

Ford Vedette and Simca Versailles Chambord braid set

" Set of braids for crankshaft Vedette Ford and Simca Aquilon engine (rear bearing and front bearing) Versailles, Chambord etc ... New product, of very high technical quality. Mounts with ease, cuts easily with a cuter leaving 1 to 2 mm ...

Ford Vedette side window or quarter window seal

Seal for quarter panel side window, welded, 2 per vehicle - Sold individually. Mounts on Ford Vedette, Abeille, Vendôme

Ford Vedette stabilizer bar bush

Silent block for Ford Vedette stabilizer bar - 4 per side or 8 for a vehicle - Sold individually.

Front blind brake cylinder Ø 28.5 mm - 1953 - Ford Vedette

" 28.50 mm single piston cylinder mounted on front wheel - Left or right mounting - 2 cylinders (blind) per front wheel From September 1953. NON-CONTRACTUAL photo. "

€98.40 TTC
(82,00 € HT)

Flexible rear brake hose 349 mm Simca Versailles Chambord Ariane

Flexible rear brake hose 349 mm long. Male ext 9mm - female int Ø 8.3 mm. Don't forget to replace the copper gasket: click here a> (The vehicle has only 1 rear flexible) - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and ...

Set of 4 door seals for Peugeot 404 saloon

Set of 4 door seals for Peugeot 404 saloon

Complete master cylinder 22 mm - Renault Dauphine Floride

Complete master cylinder 22 mm - Renault:Dauphine - Floride - Gordini - OndineR1090 -1091 -1092Ondine from beginning to September 1963

€57.60 TTC
(48,00 € HT)

Front brake cylinder 22 mm - Renault 4CV - 02/53 to 01/1956

Front brake cylinder 22 mm - Renault 4CV - 02/53 to 01/1956

€63.79 TTC
(53,16 € HT)

Rear hub bearing 50 x 90 - Citroen U23

Rear hub bearing 50 x 90 - Citroen U23

Lot 10 used nuts

FRONT brake spring kit - hydrovac Peugeot 404 - oct / 64 a 67

Front wheel brake spring kit - braking with hydrovac Peugeot 404 - oct 64 to 67

Ø18mm stabilizer bar repair kit Simca Aronde

Ø18mm stabilizer bar repair kit Simca Aronde

3-way 3/8 24 f connector

3-way 3/8 connection 24 threads - generally at the outlet of the master cylinder

Rear brake hose - 295 mm - Simca 1000

Brake hose for Simca 1000 - L 295 mm

Valves x 4 - ECH Ø 32x9x138 - Citroen P35 - Rosalie

Set of 4 ECH valves Ø 32x9x138 - Citroen P35 - Rosalie

Liner Ø 70mm semi finished int 69.50 for Citroen B14

Liner Ø 70 mm delivered semi finished in Ø 69.50 - long 170 mm - Ø 73 - collar Ø 74 - High collar 5 mm - Citroen B14 - sold individually

Front brake hose 493 mm Peugeot D4 - 11/57 to end

Front brake hose length 493 mm for Peugeot D4 D4A D4B - please check the correspondence with your model before ordering.For other models, please call us

Simca Aronde P60 Ariane upper hose - from A90 to end

Simca Aronde P60 Ariane upper hose. From the A90 and up to the P60 included.From dovetail A90 (mid 1954) to end of series, including Ariane 4 - diam. input 40 mm - long about 170 mm

Front shock absorber x 2 Citroen HY 70 and +

Pair of Record front shocks. Mounts on Citroen HY from 1970 and until the end.

Silent block for stabilizer bar Ø 16 mm Simca Ariane 1

Silent block for connection between stabilizer bar and suspension pivot mounted on Simca Ariane.Warning: there are 2 different models - stabilizer bar in 16 mm - Silent block location diameter = 20.7 mmThe price allows to redo only one side of ...

Renault Frégate rear hub kit

Renault Frégate rear hub repair kit. Includes:2 bearings1 sealing ringKit for a single hub. It is advisable to replace the 2 hub kits on the same axle

Peugeot 203 front hub kit - 1st generation

Kit for 1 front hub Peugeot 203 - 1st generation including 2 well-known brand bearingsDim 20 x 52 width 15 mmDim 25 x 62 width 17 mmWarning: check that these dimensions correspond to your vehicle before ordering - Kit for a single wheel.

Rear shocks Simca Versailles Ariane Chambord

Rear shock absorbers for Simca Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord and Présidence.Record brand, 100% conforms to the original assembly.Price of the pair.