Poissy badge for Simca Versailles rear trunk
Rear trunk badge. Can be assembled according to year on Versailles (Ford and Simca), Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2.Only the red badge is delivered
€40.00 TTC
(40,00 € HT)
(40,00 € HT)
Front lights kit 2 x soles - Ford Vedette - 1949 to1952
Sole kit for Ford Vedette - 1949 to 1952. French manufacture by Techni-Tacot.Including:2 x soles for front light plate.
€35.70 TTC
(35,70 € HT)
(35,70 € HT)
Soles for 2 locks - Ford Vedette 1949 to 1951
2 soles for 2 locks - Fits to Ford Vedette 1949 to 1951 . French manufacture by Techni-Tacot.
€5.40 TTC
(5,40 € HT)
(5,40 € HT)
jeu de 3 plots isolants pour cerclo volant Ford Vedette
€9.90 TTC
(8,25 € HT)
(8,25 € HT)
Ford Vedette refabrication steering wheel
Steering wheel for Ford Vedette, Abeille, etc.Refabrication from the original frame, careful and quality production. Delivered ready to paint, without ring or badge. The shipment is made AFTER receipt of your dilapidated copy (chipped plastic, ...
€432.00 TTC
(432,00 € HT)
(432,00 € HT)
Wiper sole kit - Ford Vedette 1954
Kit semelle pour essuie glace Ford Vedette 1954 - Fabrication française soignée - Exclusivité techni-Tacot Comprend : 2 x semelles essuie glace
€11.90 TTC
(11,90 € HT)
(11,90 € HT)
Seals for deflector x2 Ford Vedette
Set of 2 deflector gaskets for Ford Vedette.Refabrication of original quality
€332.00 TTC
(332,00 € HT)
(332,00 € HT)
Windscreen wiper - Stainless steel brushes x 2 - 260 mm
Stainless steel wiper blades. Length 260 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
€31.39 TTC
(26,16 € HT)
(26,16 € HT)
Kit of 2 x wiper soles - Ford Vedette from 1949 to 1952
Sole kit for Ford Vedette from 1949 to 1952. Made in France by Techni-Tacot.Including:2 x wiper soles.
€11.90 TTC
(11,90 € HT)
(11,90 € HT)
Wiper - Stainless steel squeegee blades 205 mm x 2
Stainless steel wiper blades, squeegee type 20.5 cm . Mounts with the adjustable arms on sale HERE
€15.60 TTC
(13,00 € HT)
(13,00 € HT)
Windscreen seal Ford Vedette 1953/54
Welded windscreen seal - without central upright - for Vedette 1953 and 54. Non-contractual photo
€114.00 TTC
(95,00 € HT)
(95,00 € HT)
Kit of 2 x platinum rear light bases - Ford Vedette from 1949 to 1952
Sole kit for Ford Vedette from 1949 to 1952. Made in France by Techni-Tacot.Including:2 x soles for rear light plate.
€35.50 TTC
(35,50 € HT)
(35,50 € HT)
MISTRAL engine nameplate
€10.80 TTC
(10,80 € HT)
(10,80 € HT)
Wiper - Stainless steel brushes x 2 - 285 mm
Stainless steel wiper blades. Length 285 mm. Sold by 2 Mounts with the adjustable arms on sale HERE
€35.34 TTC
(29,45 € HT)
(29,45 € HT)
Viewed products
Rear brake cylinder -25.4 mm - cone protruding - Peugeot D4 - 04/64 to 05/65
Rear wheel cylinder d 25.4mm, Peugeot D4 D4A D4B - 04/64 to 05/65.Model with cone coming out of the liquid inlet well. Non contractual photo.
€60.60 TTC
(50,50 € HT)
(50,50 € HT)
Seals of the 2 rear doors - Peugeot D3 D4
Seals of the 2 rear doors - Peugeot D3 D4.Product sold in one length. To be cut according to the length of each door.
€117.60 TTC
(98,00 € HT)
(98,00 € HT)
copy of Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
€297.60 TTC
(248,00 € HT)
(248,00 € HT)
Pressure hose for igniter Ø 5.5 mm - by the meter
Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.
€10.20 TTC
(8,50 € HT)
(8,50 € HT)
Front brake hose 493 mm Peugeot D4 - 11/57 to end
Front brake hose length 493 mm for Peugeot D4 D4A D4B - please check the correspondence with your model before ordering.For other models, please call us
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Rear brake cylinder -22 mm - cone protruding - Peugeot D4 - 11/57 a 04/64
Rear brake cylinder -22 mm - protruding cone - Peugeot D4 - 11/57 to 04/64 - French manufacture.
€70.80 TTC
(59,00 € HT)
(59,00 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
€27.00 TTC
(22,50 € HT)
(22,50 € HT)
50 mm galvanized flange or collar exhaust - Simca Versailles Chambord
Flange for exhaust connection (clamp with caliper)
€9.00 TTC
(7,50 € HT)
(7,50 € HT)
