- New
Set of 4 FRONT brake shoes 65mm larg Peugeot 404 thermostable
Set of 4 relined front brake shoes, in standard exchange. Peugeot 404 thermostable (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished ...
(180,00 € HT)
- New
Lot 2 vis occasion 7/16 - sur banjo
(40,00 € HT)
- New
usinage sur mesure - moyeu D4
(60,00 € HT)
- New
Jeu leche vitre int et extérieurs pour 4 portes - Peugeot 203
(59,50 € HT)
- New
Soles kit for handles and locks - Simca Versailles Chambord and Ariane
Soles kit fit to Simca Versailles Chambord and Ariane. French manufacture by Techni-Tacot.Including:8 x soft soles for exterior door handles
(35,50 € HT)
- New
Front cylinder - VLR DELAHAYE
" Front brake cylinder. D 1" "1/4 (31.75 mm). Fits vehicles from July 54 but can be fitted on ALL models. Advantageously replaces cylinders in 1'1 / 8 (before 06 / 1954). More efficient braking. Sold individually (1 cylinder per wheel). Entry ...
(42,15 € HT)
- New
Rear brake cylinder - VLR DELAHAYE
" Rear brake cylinder. D 1" "(25.4 mm). Mounts on all models. Sold individually (1 cylinder per wheel) "
(42,00 € HT)
- New
Master cylinder 25.4 mm - VLR DELAHAYE
" Complete master cylinder for Peugeot 203 Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "
(52,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 64 products.
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(6,08 € HT)
Adapter 3/4 16 M by 1/2 20 F for master cylinder
Adapter for master cylinder with 18 mm inlet (3/4 - 16 thread) Renault Colorale, Goélette and derivatives.Mounts on the liquid inlet (coming from the tank) and allows the supply tube to be connected to the VERTICAL. The tube must be fitted with a ...
(20,80 € HT)
Adapter connection 1/2 UNF female - 3/8 UNF male
Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads
(9,90 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(29,00 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
(9,96 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
(15,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(16,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,00 € HT)
Banjo adapter for master cylinder 18mm
" Adapter allowing to connect the inlet of a master cylinder in 18 mm on the original tube which goes to the jar. When the old models are in diam. 22mm, the adapter is essential to connect the tube coming from from the jar. The set consists of: 2 ...
(40,95 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
(29,50 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
(66,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(128,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(155,00 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(180,00 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
Brake switch - STOP - spring-loaded
Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.
(24,92 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
(42,00 € HT)
- New
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,20 € HT)
Flexible front brake hose 380 mm - Citroen Traction
" Flexible front brake hose length 380 mm. (Attention depending on assembly exists in length 470 mm (available on the Shop) Traction 7.11 and 15 hp - U23 and HY "
(25,00 € HT)
Front brake cylinder 28.5 mm - citroen U23
Front brake cylinder d 28.57 mm (1'1 / 8). French made
(111,30 € HT)
front brake cylinder 34.9mm - citroen U23
Front brake cylinder d 34.93 mm (1'3 / 8). French made
(82,10 € HT)
Front brake hose 470 mm Traction Citroen
Front brake hose length 470 mm. (Attention according to assembly exists in length 380 mm (available on the Shop)Traction 7.11 and 15 hp - U23 and HY
(25,00 € HT)
Front or rear brake hose 400 mm
Front or rear brake hose 400 mm long. male thread 17mm approx
(25,00 € HT)
Hydrovac brake assist Citroen U23
Reconditioned vacuum brake assist (hydrovac). Citroen U23 fitting or similar vehicle. Complete disassembly, micro balling, replacement of wearing parts, tests. Lacquering. Very careful work. The refurbished part is sent after receipt of the used ...
(1 329,17 € HT)
Maître cylindre asymétrique 38.1 mm Citroen U23
Maître cylindre piston d 38.1 mm (1'1/2). Fixation 3 trous asymétriques. longeur 210 mm. Se monte sur Citroen U23 suivant version. Attention stock très réduit, nous consulter avant commande svp.
(240,00 € HT)
Master cylinder 38.1 mm - Citroen U23
Fit to Citroen U23 and other derivatives. Fixing 3 symmetrical holes. Complete master cylinder. d 38.1 mm. 3-hole fixing. 3 side outlets and 1 at the end.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets. ...
(169,00 € HT)
Master cylinder kit 38.1 mm Citroen U23
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(8,85 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
(5,15 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle
Adaptateur freinage 1/2-20 UNF mâle par 3/8 24 filets femelle
(10,50 € HT)
Rear brake cylinder 28.5 mm - citroen U23
Rear brake cylinder d 28.57 mm (1'1 / 8). French made
(111,30 € HT)
rear brake cylinder 38.1mm - citroen U23
Rear brake cylinder d 38.10 mm. French made
(103,70 € HT)
rear brake cylinder 44.5mm - citroen U23
Rear brake cylinder d 44.50 mm (1'3 / 4). French made
(117,50 € HT)
Rear brake cylinder kit 28.5 mm CItroen U23
Repair kit for 1 rear wheel cylinder 28.5 mm includes:Kit for one cylinder.
(36,10 € HT)
- New
Rear brake cylinder kit 44.4 mm - Citroen U23
For Citroen U23 and other heavy goods vehicles. Repair kit for 1 rear wheel cylinder 44.5 mmn includes:2 steel pistons, 2 cups, 2 dust covers, 1 springKit for one cylinder.
(60,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Set of 4 relined front brake shoes Citroen U23
Set of 4 relined brake shoes (Front) in standard exchange for Citroen U23. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...
(145,00 € HT)
Set of 4 relined rear brake shoes Citroen U23
Set of 4 relined brake shoes (Ar) in standard exchange for Citroen U23. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.Non ...
(188,33 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
SUMB Marmon master cylinder plug kit
For Simca Sumb Mamon, Citroën U23 and other heavy goods vehicles.Kit of 3 caps + 3 copper gaskets for master cylinder.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.
(19,15 € HT)
Tailor-made front or rear brake hose
Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Non-contractual image.
(29,50 € HT)
