- New
Set of 4 FRONT brake shoes 65mm larg Peugeot 404 thermostable
Set of 4 relined front brake shoes, in standard exchange. Peugeot 404 thermostable (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished ...
(180,00 € HT)
- New
Lot 2 vis occasion 7/16 - sur banjo
(40,00 € HT)
- New
usinage sur mesure - moyeu D4
(60,00 € HT)
- New
Jeu leche vitre int et extérieurs pour 4 portes - Peugeot 203
(59,50 € HT)
- New
Soles kit for handles and locks - Simca Versailles Chambord and Ariane
Soles kit fit to Simca Versailles Chambord and Ariane. French manufacture by Techni-Tacot.Including:8 x soft soles for exterior door handles
(35,50 € HT)
- New
Front cylinder - VLR DELAHAYE
" Front brake cylinder. D 1" "1/4 (31.75 mm). Fits vehicles from July 54 but can be fitted on ALL models. Advantageously replaces cylinders in 1'1 / 8 (before 06 / 1954). More efficient braking. Sold individually (1 cylinder per wheel). Entry ...
(42,15 € HT)
- New
Rear brake cylinder - VLR DELAHAYE
" Rear brake cylinder. D 1" "(25.4 mm). Mounts on all models. Sold individually (1 cylinder per wheel) "
(42,00 € HT)
- New
Master cylinder 25.4 mm - VLR DELAHAYE
" Complete master cylinder for Peugeot 203 Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "
(52,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 56 products.
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(6,08 € HT)
Adapter connection 1/2 UNF female - 3/8 UNF male
Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads
(9,90 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(29,00 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
(9,96 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
(15,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(16,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,00 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
(29,50 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
(66,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(128,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(155,00 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(180,00 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
(15,83 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
(15,83 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
(42,00 € HT)
Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
(3,00 € HT)
- New
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,20 € HT)
Front brake cylinder - Left or Right 28.6mm - Renault Fregate
" Front right or left wheel cylinder for Renault Frégate (2 per wheel) Non-contractual photo. "
(82,00 € HT)
Front brake hose - 450 mm - Renault Fregate
Front brake hose 450 mm long. (The original length is 419 mm but has been lengthened to avoid too much stress during a large turning of the wheels)
(25,00 € HT)
Front wheel blind cylinder repair kit 28.6 mm - Renault Fregate
Repair kit for front wheel cylinder 28.5 mm. Supplied with piston.(you need 4 per vehicle)
(20,35 € HT)
Master cylinder complete - 25.4 mm - Renault Fregate
" Master cylinder complete with bellows. Complete. Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "
(52,00 € HT)
Master cylinder repair kit Renault Fregate Transfluide, Amiral, Domaine, etc.
Repair kit for Frégate master cylinder - d 25.4mm.
(21,85 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(8,85 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
(5,15 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle
Adaptateur freinage 1/2-20 UNF mâle par 3/8 24 filets femelle
(10,50 € HT)
Rear brake cylinder - 25.4 mm -Renault Fregate
Rear wheel cylinder d 25.4mm for Renault Frégate. (1 per wheel)
(42,00 € HT)
Rear brake hose - 184 mm - Renault Fregate
Rear brake hose 184 mm long. Sold by the piece. (2 hoses per vehicle)
(20,00 € HT)
Renault Frégate rear brake cylinder repair kit
" Repair kit for 1 rear wheel cylinder. Supplied with pistons and spring. Piston diameter = 25.4 mm "
(21,85 € HT)
Renault Fregate rear brake shoe set 4
Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.Width 52 x 267 and 280 mm
(112,50 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Set of 4 Renault Fregate front brake shoes
Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.Width 67mm x 280mm
(140,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
