Courroie largeur 10 mm moteur 817 - Saviem SG2
(19,80 € HT)
Jauge Peduzzi
(83,00 € HT)
Kit joints adpatable avec joint de cadre pour toit ouvrant - Peugeot 203
(146,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(180,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(137,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(91,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(72,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(46,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Engine There are 111 products.
12v to 6v regulator for temperature, pressure, fuel gauge
This module allows the use of 6V pressure gauges on a 12V vehicle (negative to ground). Mounts on a temperature gauge, pressure, fuel gauge, ...Very practical, it is fixed directly on the supply terminal of the pressure gauge thanks to a hole ...
(30,00 € HT)
Aerosol gasket for cylinder head
Sealing spray varnish to be sprayed on both sides of a cylinder head gasket. Improves sealing, essential with solid copper gaskets (any thickness)
(35,00 € HT)
Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
(35,00 € HT)
Axe 8 mm avec papillon pour réparation carburateur Solex 32 PBIC ou similaire
(18,29 € HT)
Axle 8.5 mm Ø repair - without butterfly - Solex 32 PBIC or similarsimilar
Shaft dimension repair 8.5 mm without butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm
(14,13 € HT)
Battery switch - safety
Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.
(10,00 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
(9,00 € HT)
bearing bush 0.25 - Ø 47.62 - Simca Aronde Ariane 1300 - Flash
bearing bush 0.25 - Ø 47.62 - Simca Aronde 1300 - Flash
(306,00 € HT)
bearing bush 0.25 - Ø 47.62 - Simca Aronde Ariane RUSH 6 and 7 hp
Set of bearings for crankshaft dimension 0.25 - Ø 47.62 mmMounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor RUSH 6 or 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301
(354,00 € HT)
Cable passage vitesses pour SImca Aronde P60 à partir de 06/1960
(90,00 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
(22,50 € HT)
Charger and maintenance 6v / 12v Accumate
AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...
(85,00 € HT)
Clutch disc 180mm - Simca 9 Aronde P60 Standard Exchange
Clutch disc reconditioned, in standard exchange. Complete disassembly, micro-blasting and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(92,25 € HT)
Clutch mechanism Simca 9 Aronde P60
Clutch mechanism reconditioned, in standard exchange.Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - Depending on the year, ...
(230,00 € HT)
Complete pistons - set of 4 - Ø 72.00 mm - Simca
set of 4 pistons Ø 72 mm - Simca.
(615,00 € HT)
Complete pistons - set of 4 - Ø 72.50 mm - Simca
set of 4 piston Ø 72.50 mm - Simca.
(615,00 € HT)
Complete pistons - set of 4 - Ø 73.00 mm - Simca
Set of 4 piston Ø 73.00 mm - Simca.
(615,00 € HT)
Complete pistons - set of 4 - Ø 74.00 mm - Simca Aronde P60 ARIANE - Flash and Rush engine
Complete pistons - set of 4 - Ø 74.00 mm - Simca Aronde P60 ARIANE - Flash and Rush engine
(615,00 € HT)
Complete pistons - set of 4 - Ø 74.50 mm - Simca Aronde P60 ARIANE - Flash and Rush engine
Set of 4 piston Ø 74.50 mm - Simca Aronde P60 - Flash and RushSupplied complete with pins - segments - clips
(615,00 € HT)
Complete set of solex 32 pbic carburetor gaskets
Solex 32 pbic carburetor gaskets kit - accelerator pump diaphragm included (Colorale, Goélette, R2087, Frigate, etc) Version with manual starter
(34,13 € HT)
connecting rod bearing 0.25 - Ø 39.75 - Simca 9 - 1200 cm3
connecting rod bearing 0.25 - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)
(240,00 € HT)
connecting rod bearing 0.25 - Ø 39.75 - Simca Aronde RUSH 6cv - 1090 cm3
connecting rod bearing 0.25 - Ø 39.75 - Simca Aronde RUSH 6cv - 1090 cm3
(219,00 € HT)
connecting rod bearing 0.25 - Ø 43.75 - FLASH - RUSH 7CV - RUSH SUPER M - Simca Aronde Ariane and 1300 1301
Set of bearings for connecting rods dimension 0.25 - Ø 43.75Mounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor FLASH or RUSH 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301(Not ...
(219,00 € HT)
connecting rod bearing STD - Ø 40 - Simca Aronde RUSH 6cv - 1090 cm3
connecting rod bearing STD - Ø 40 - Simca Aronde RUSH 6cv - 1090 cm3
(190,00 € HT)
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)
(195,83 € HT)
connecting rod bearing STD - Ø 40mm - Simca 9 - Aronde 1951-56
connecting rod bearing STD - Ø 40mm - Simca 9 - Aronde 1951-56
(195,83 € HT)
conrod bearing STD - Ø 44 - FLASH - RUSH 7CV - RUSH SUPER M - Simca Aronde Ariane and 1300 1301
Set of bearings for connecting rods STD dimension - Ø 44Mounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor FLASH or RUSH 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301(Not suitable ...
(195,00 € HT)
Cover: Flash or RUSH engine flywheel spinnaker ring - Simca Aronde P60 Ariane
Oil seal ring on the flywheel side to complete the Simca FLASH or RUSH engine gaskets kit: dimension 75 x 95Engine types 306 (6hp) 301 - (7hp) 301 S (7hp)Displacement 1,089 cm3 1,290 cm3Bore (mm) 68 74Stroke (mm) 75 75
(36,90 € HT)
Dark green engine paint RAL 6005 - 500 ml
Dark green engine paint RAL 6005 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)
Distribution kit: 2 sprockets + chain - central nut type - Simca 9 - 1200 cm3
Distribution kit: 2 sprockets + chain - central nut type - Simca 9 - 1200 cm3
(310,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
(10,00 € HT)
Echappement sangle support renforcé 50 mm
Sangle de suspension pour échappement, caoutchouc armé. entraxe 52 mm pour vis M8 mm.
(9,03 € HT)
Electronic ignition amplifier assistance module - 12V negative to earth
Electronic ignition assistance module. Allows for more energetic spark plug ignition, improved starting, smoother pick-up, helps reduce fuel consumption and consequently pollution.The breakers (platinum-plated screws) are left in place - the ...
(79,50 € HT)
Engine gaskets kit - Simca 9 - 1221 cm3 engine
Gasket set with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engineIncludes engine gaskets including cylinder head gasket, and oil seal ring for crankshaftNon contractual photo. Not suitable for Flash or Rush engines.
(204,75 € HT)
Engine gaskets kit - Simca Aronde Flash / Rush
Gasket kit with cylinder head gasket for Simca Aronde Ariane flash and Rush engineEngine types 306 (6hp) 301 - (7hp) 301 S (7hp)Displacement 1,089 cm3 1,290 cm3Bore (mm) 68 74Stroke (mm) 75 75Please note that two oil seal (crankshaft side and ...
(39,50 € HT)
Engine paint black RAL 9005 - 500 ml
Black paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim 4090), ...
(34,00 € HT)
Engine paint oxide green RAL 6020 - 500 ml
Engine paint oxide green RAL 6020 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)
Engine red paint - 500 ml -
Engine red paint -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim ...
(34,00 € HT)
Exhaust manifold paint - 250 ml
(40,00 € HT)
Exhaust silent bloc
Echappement silent bloc support renforcé 26 mm long hors tout 65 mm - filetage M8
(8,29 € HT)
Exhaust support strap reinforces 90 mm
Suspension strap for exhaust. Robust construction, reinforced rubber, metal eyelets.92 mm center distance for M8 mm screws.
(13,48 € HT)
Exhaust suspension ring 63x96 width 27 mm - Peugeot 203
Suspension ring for Peugeot 203 exhaust and othersDimension approximately 63 x 96 x width 27 mm
(11,00 € HT)
Flector transmission - Simca 9 dovetail P60 all models
Flector transmission - Simca 9 dovetail P60 all models
(90,00 € HT)
Ford RAL 5005 blue engine paint - 500 ml
Ford RAL 5005 blue engine paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with ...
(34,00 € HT)
Fuel gauge - replacement float
Float in synthetic material resistant to current fuels. Used to replace the cork floats on the fuel gauge Length: 1.40" Diameter: 1.14"
(17,72 € HT)
Fuel gauge - replacement plastic float
White plastic float. Used to replace ring gauge floats.
(12,50 € HT)
Fuel needle - Solex 32 PBIC carburettor or similar
Fuel needle - Solex 32 PBIC carburettor or similar
(9,90 € HT)
Fuel pump WITH lever Simca Ariane4 Aronde P60
Fuel pump with primer. Supplied with base gasket.
(37,50 € HT)
Fuel pump WITHOUT lever Simca Ariane 4 Aronde P60
Fuel pump with primer. Supplied with base gasket.
(35,00 € HT)
Gasket for Simca Aronde P60 Rush engine oil purifier
O-ring for oil purifier mounted on Rush Simca engine.
(14,50 € HT)
gasket for solex 32 pbic carburetor
2 x paper gaskets for Solex 32 pbi carburetor base.Fixing center distance: 60 mmCentral passage: 32 mmTotal length: 78 mmwidth: 50mm
(3,80 € HT)
Gasket paste for motor - auto extrudable cartridge 200 ml
Mot. Silicone gasket & self-extruding housing RTV K164 high-quality, heat-resistant silicone base: modified oxime silicone (acid-free hardening system)
(35,00 € HT)
Gearbox or axle oil SAE 80-140 - IGOL - 1L
Viscosity index 80 - 140API GL-4(Not suitable for Peugeot type screw axles)
(20,00 € HT)
gearbox spinnaker ring - Simca Aronde P60 Ariane
gearbox spinnaker ring - Flash or RUSH engine - Simca Aronde P60 Arianesize 50 x 32. Please check the size according to your box model.
(8,00 € HT)
High engine gaskets kit - Simca 9 - 1221 cm3 engine
TOP ENGINE gaskets kit with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engine.Non contractual photo. Not suitable for FLash or RUSH engines.
(104,47 € HT)
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Ignition coil 12v standard
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(38,70 € HT)
Ignition coil 12v VALEO
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(48,00 € HT)
Ignition finger igniter Ducellier 65mm
Finger for Ducellier distributor equipped with a 65mm headMounts with Ducellier 65 mm head
(11,25 € HT)
Ignition harness silicone Simca 9 dovetail P60
Ignition harness (5 wires) Highly recommended with electronic ignition. Wire with red silicone insulator, works with platinum screws or electronic ignition, current manufacture (not from old stocks).Lengths:27 - 27 - 36 - 45 cm and coil 48 cm
(58,29 € HT)
Ignition head Ducellier 65 mm
Head for Ducellier distributor: Interlocking inside the head = 65 mm, outside about 72 mm.To be assembled with breakers 1 237 013 808, and ducellier finger.
(20,45 € HT)
Ignition set of Ducellier breakers
Set of breakers for Ducellier distributor For Renault Prairie, R2087, Goélette and derivatives
(12,00 € HT)
Ignition set of SEV breakers
" Set of breakers for SEV igniter For Renault Prairie, R2087, Goélette and derivatives "
(12,00 € HT)
IGOL 20W50 mineral oil - 5L can
5 l can (non contractual photo) - Viscosity: 20W-50BenefitsHéRITAGE GTZ mineral oil.Multigrade lubricant for Gasoline and Diesel engines, made from severely refined mineral bases and additives suitable for older engines. The anti-wear additive ...
(30,00 € HT)
IGOL Rallye Gear axle transmission oil SAE 75 80 90 - GL4
Oil for gearbox and bridge for old mechanics. Type SAE 75 80 90 - GL4. 1L container.(Not suitable for Peugeot type screw axles)
(15,00 € HT)
IGOL semi-synthetic 15W50 oil - 5L can
Can of 5 L.Viscosity: 15W-50BenefitsHéRITAGE ZS semi-synthetic oil.Multigrade lubricant for gasoline engine of tourism, reinforced with synthetic bases, particularly adapted to the old engines, gasoline or diesel, equipped with an oil filter - ...
(35,00 € HT)
Jeu de 2 supports moteur RUSH - Simca Aronde P60 Ariane
(137,46 € HT)
Kit: spinnaker ring timing dimension for RUSH engine - Simca Aronde P60 Ariane
Sealed spinnaker ring on the distribution side to complete the Simca RUSH engine gaskets kit: dimension 52 x 69Engine types 306 (6hp) 301 - (7hp) 301 S (7hp)Displacement 1,089 cm3 1,290 cm3Bore (mm) 68 74Stroke (mm) 75 75
(10,41 € HT)
Kit: spinnaker ring timing for Flash engine - Simca Aronde P60 Ariane
Sealed spinnaker ring on the distribution side to complete the Simca FLASH engine gaskets kit: dimension 35 x 52Engine types 306 (6hp) 301 - (7hp) 301 S (7hp)Displacement 1,089 cm3 1,290 cm3Bore (mm) 68 74Stroke (mm) 75 75
(10,41 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - ivory background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
Metal body battery switch - safety
Coupe batterie - permet d'isoler électriquement la batterie.
(22,50 € HT)
paper gasket x 2 + thermal wedge for solex 32 pbic carburetor
kit 2 joints papier + cale thermique pour embase de carburateur Solex 32 pbi.
(12,46 € HT)
Piston x 4 complete Ø 75.00 mm - Simca Aronde P60 - Flash and Rush
Set of 4 piston Ø 75.00 mm - Simca Aronde P60 - Flash and RushSupplied complete with pins - segments - clips
(615,00 € HT)
Pistons complets - jeu de 4 - Ø 73.50 mm - Simca
Set of 4 piston Ø 73.50 mm - Simca.
(615,00 € HT)
PREMIUM Flash-Rush 1100 and 1300 engine gasket set - Simca Aronde Ariane
Top quality gasket set - with cylinder head gasket - Simca Aronde Ariane Flash and Rush engineEngine types 306 (6hp) 301 - (7hp) 301 S (7hp)Displacement 1,089 cm3 1,290 cm3Bore (mm) 68 74Stroke (mm) 75 75Please note that two oil seal (crankshaft ...
(55,00 € HT)
Pressure hose for igniter Ø 6 mm - by the meter
Hose to connect the igniter / carburetor depression 6 mm sold by the meter.
(8,50 € HT)
PSX 44 45 carbon brushes - for Paris Rhone D8 starter - Simca Aronde - 1000
2 PARIS RHONE PSX 44 45 starter brushesDimension 7 x 15 x 14D8E26,29,34,40L13.17Simca 1000 carsMassey Ferguson tractors
(20,00 € HT)
Reinforced collar for exhaust - Ø 44-47 mm
Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing
(4,83 € HT)
Reinforced collar for exhaust - Ø 52-55 mm
Reinforced collar for exhaust - Ø 52.55 mmRobust French manufacturing
(5,42 € HT)
Reinforced collar for exhaust - Ø 64-67 mm
Reinforced collar for exhaust - Ø 64-67 mmRobust French manufacturing
(6,50 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 3 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - ...
(103,00 € HT)
Segment clearance Ø 72 mm - 3 x 2.5 x 2.5 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm8 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - Non-contractual photo
(103,00 € HT)
Segment set Ø 72 mm Simca 2.5x2.5x2.5x5 - 4cyl
Segment set Ø 72 mm Simca 2.5x2.5x2.5x5 - 4cyl
(75,00 € HT)
Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl
Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl
(100,95 € HT)
Segment set Ø 74 mm Simca 2.5x2.5x2.5x5 - 4cyl
Segment set Ø 74 mm Simca 2.5x2.5x2.5x5 - 4cyl
(75,00 € HT)
Segment set Ø 74 mm Simca 2x2x5 - 4cyl
Segment set Ø 74 mm Simca 2x2x5 - 4cyl
(75,00 € HT)
Set of 4 candles Simca 9 Aronde P60
Set of 4 NGK spark plugs with standard base (14 mm), SImca 9 Aronde P60 engine. Compatible with SP95 and SP98 fuels.
(20,00 € HT)
Shaft 8.5 mm Ø repair - repair Solex 32 PBIC carburettor or similar
Shaft dimension repair 8.5 mm with butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm
(18,29 € HT)
side shim set bearing +0.20 mm - Simca Aronde Ariane RUSH 6 and 7 hp engine
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engineoversized + 0.20 mm
(125,00 € HT)
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine larg : 2.335 mm - original size
(96,00 € HT)
Simca 9 Aronde P60 transmission shaft cross member all models
Simca 9 Aronde P60 transmission shaft cross member all models24x63 mm (attention 2 per vehicle)
(98,00 € HT)
STD bearing bush - Simca 9 - Aronde - 1951-568 - 1200 cm3
STD bearing bush - Simca 9 - Aronde - 1951-568 - 1200 cm3
(329,17 € HT)
STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash
STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash
(258,00 € HT)
STD bearing bush - Ø 47.87 - Simca Aronde Ariane RUSH 6 and 7 hp
Set of bearing bearings for crankshaft dimension STD - Ø 47.87 mmMounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor RUSH 6 or 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301
(354,00 € HT)