
IGOL semi-synthetic 15W50 oil - 5L can
Can of 5 L.Viscosity: 15W-50BenefitsHéRITAGE ZS semi-synthetic oil.Multigrade lubricant for gasoline engine of tourism, reinforced with synthetic bases, particularly adapted to the old engines, gasoline or diesel, equipped with an oil filter - ...
(35,00 € HT)
Engine gaskets kit - Simca Aronde Flash / Rush
Gasket kit with cylinder head gasket for Simca Aronde Ariane flash and Rush engineEngine types 306 (6hp) 301 - (7hp) 301 S (7hp)Displacement 1,089 cm3 1,290 cm3Bore (mm) 68 74Stroke (mm) 75 75Please note that two oil seal (crankshaft side and ...
(39,50 € HT)
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine larg : 2.335 mm - original size
(96,00 € HT)
Exhaust manifold paint - 250 ml
(40,00 € HT)

Reinforced collar for exhaust - Ø 64-67 mm
Reinforced collar for exhaust - Ø 64-67 mmRobust French manufacturing
(6,50 € HT)
Simca 9 Aronde P60 transmission shaft cross member all models
Simca 9 Aronde P60 transmission shaft cross member all models24x63 mm (attention 2 per vehicle)
(98,00 € HT)
Shaft 8.5 mm Ø repair - repair Solex 32 PBIC carburettor or similar
Shaft dimension repair 8.5 mm with butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm
(22,00 € HT)
Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl
Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl
(100,95 € HT)
Aviation collex type paste gasket for cylinder head - 117ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
(23,00 € HT)
Charger and maintenance 6v / 12v Accumate
AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...
(86,25 € HT)
connecting rod bearing STD - Ø 40mm - Simca 9 - Aronde 1951-56
connecting rod bearing STD - Ø 40mm - Simca 9 - Aronde 1951-56
(195,83 € HT)
Aerosol gasket for cylinder head
Sealing spray varnish to be sprayed on both sides of a cylinder head gasket. Improves sealing, essential with solid copper gaskets (any thickness)
(35,00 € HT)
Complete pistons - set of 4 - Ø 74.00 mm - Simca Aronde P60 ARIANE - Flash and Rush engine
Complete pistons - set of 4 - Ø 74.00 mm - Simca Aronde P60 ARIANE - Flash and Rush engine
(700,00 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - ivory background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
Engine paint oxide green RAL 6020 - 500 ml
Engine paint oxide green RAL 6020 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)

Viewed products
Sprocket kit + timing chain - Simca 8 - 1200
Sprocket kit + timing chain - Simca 8 - 1200
(312,00 € HT)
Renault Fregate ECHAP / ADM manifold gaskets x 2
Set of 2 gaskets for exhaust / intake manifold Renault Fregate engine and derivatives. Non contractual photo.
(24,92 € HT)
Segment set Ø 56.00 2x2x3.5x3.5 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.00- 2 x compression h 2mm- 2 x scraper h 3.5 mmContact us for other dimensions.
(199,17 € HT)
Segment set Ø 81 mm - 2.38 x 2.38 x 5 - SUMB MARMON
Segment set Ø 81 mm - 2.38 x 2.38 x 5 - SUMB MARMONor 24 segments in all. It is essential to check the cutting clearance.
(156,00 € HT)
renov
(400,00 € HT)
Set 4 Pistons 56.50 - axle 16 mm - Rosengart LR
Set of 4 pistons for Rosengart LR2, LR4, LR4N2, and derivatives. Current manufacture - Bore 56.00 - 56.50 - 57.00 - 57.50 - 58.00 mm For 12 mm or 16 mm axle (to be specified when ordering). Supplied with axles, segments, circlips. Possibility of ...
(1 080,00 € HT)