Courroie largeur 10 mm moteur 817 - Saviem SG2
(19,80 € HT)
Jauge Peduzzi
(83,00 € HT)
Kit joints adpatable avec joint de cadre pour toit ouvrant - Peugeot 203
(146,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(180,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(137,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(91,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(72,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(46,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Engine There are 42 products.
12v to 6v regulator for temperature, pressure, fuel gauge
This module allows the use of 6V pressure gauges on a 12V vehicle (negative to ground). Mounts on a temperature gauge, pressure, fuel gauge, ...Very practical, it is fixed directly on the supply terminal of the pressure gauge thanks to a hole ...
(30,00 € HT)
Battery switch - safety
Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.
(10,00 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
(9,00 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
(22,50 € HT)
Charger and maintenance 6v / 12v Accumate
AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...
(85,00 € HT)
Dark green engine paint RAL 6005 - 500 ml
Dark green engine paint RAL 6005 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)
Echappement sangle support renforcé 50 mm
Sangle de suspension pour échappement, caoutchouc armé. entraxe 52 mm pour vis M8 mm.
(9,03 € HT)
Electronic ignition amplifier assistance module - 12V negative to earth
Electronic ignition assistance module. Allows for more energetic spark plug ignition, improved starting, smoother pick-up, helps reduce fuel consumption and consequently pollution.The breakers (platinum-plated screws) are left in place - the ...
(79,50 € HT)
Engine paint black RAL 9005 - 500 ml
Black paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim 4090), ...
(34,00 € HT)
Engine paint oxide green RAL 6020 - 500 ml
Engine paint oxide green RAL 6020 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)
Engine red paint - 500 ml -
Engine red paint -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim ...
(34,00 € HT)
Exhaust manifold paint - 250 ml
(40,00 € HT)
Exhaust silent bloc
Echappement silent bloc support renforcé 26 mm long hors tout 65 mm - filetage M8
(8,29 € HT)
Exhaust support strap reinforces 90 mm
Suspension strap for exhaust. Robust construction, reinforced rubber, metal eyelets.92 mm center distance for M8 mm screws.
(13,48 € HT)
Exhaust suspension ring 63x96 width 27 mm - Peugeot 203
Suspension ring for Peugeot 203 exhaust and othersDimension approximately 63 x 96 x width 27 mm
(11,00 € HT)
Ford RAL 5005 blue engine paint - 500 ml
Ford RAL 5005 blue engine paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with ...
(34,00 € HT)
Fuel gauge - replacement float
Float in synthetic material resistant to current fuels. Used to replace the cork floats on the fuel gauge Length: 1.40" Diameter: 1.14"
(17,72 € HT)
Fuel gauge - replacement plastic float
White plastic float. Used to replace ring gauge floats.
(12,50 € HT)
Fuel pump with angled Panhard lever
Fuel pump with primer. Supplied with base gasket.
(35,00 € HT)
Fuel pump with Panhard lever, in-line output
Fuel pump with primer. Supplied with base gasket.
(35,00 € HT)
Gasket paste for motor - auto extrudable cartridge 200 ml
Mot. Silicone gasket & self-extruding housing RTV K164 high-quality, heat-resistant silicone base: modified oxime silicone (acid-free hardening system)
(35,00 € HT)
Gearbox or axle oil SAE 80-140 - IGOL - 1L
Viscosity index 80 - 140API GL-4(Not suitable for Peugeot type screw axles)
(20,00 € HT)
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Ignition coil 12v standard
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(38,70 € HT)
Ignition coil 12v VALEO
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(48,00 € HT)
IGOL 20W50 mineral oil - 5L can
5 l can (non contractual photo) - Viscosity: 20W-50BenefitsHéRITAGE GTZ mineral oil.Multigrade lubricant for Gasoline and Diesel engines, made from severely refined mineral bases and additives suitable for older engines. The anti-wear additive ...
(30,00 € HT)
IGOL Rallye Gear axle transmission oil SAE 75 80 90 - GL4
Oil for gearbox and bridge for old mechanics. Type SAE 75 80 90 - GL4. 1L container.(Not suitable for Peugeot type screw axles)
(15,00 € HT)
IGOL semi-synthetic 15W50 oil - 5L can
Can of 5 L.Viscosity: 15W-50BenefitsHéRITAGE ZS semi-synthetic oil.Multigrade lubricant for gasoline engine of tourism, reinforced with synthetic bases, particularly adapted to the old engines, gasoline or diesel, equipped with an oil filter - ...
(35,00 € HT)
Metal body battery switch - safety
Coupe batterie - permet d'isoler électriquement la batterie.
(22,50 € HT)
Pressure hose for igniter Ø 6 mm - by the meter
Hose to connect the igniter / carburetor depression 6 mm sold by the meter.
(8,50 € HT)
Reinforced collar for exhaust - Ø 44-47 mm
Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing
(4,83 € HT)
Reinforced collar for exhaust - Ø 52-55 mm
Reinforced collar for exhaust - Ø 52.55 mmRobust French manufacturing
(5,42 € HT)
Reinforced collar for exhaust - Ø 64-67 mm
Reinforced collar for exhaust - Ø 64-67 mmRobust French manufacturing
(6,50 € HT)
Standard 6V coil ignition
Branded ignition coil guaranteed for use with 6 V platinum-plated igniter (breakers). Impedance respected to prevent the breakers from becoming blue. Also works perfectly with electronic module or integral electronic igniter.
(36,00 € HT)