jeu de 3 plots isolants pour cerclo volant Ford Vedette
(8,25 € HT)
Upper and lower adjustment for Ford vedette front hub
Allows adjustment of the camber on the front axle. When these parts are worn, play appears making it impossible to adjust the geometry of the front axle and making the vehicle's driving imprecise.Sold individually (2 per front hub)
(96,00 € HT)
Soles for 2 locks - Ford Vedette 1949 to 1951
2 soles for 2 locks - Fits to Ford Vedette 1949 to 1951 . French manufacture by Techni-Tacot.
(5,40 € HT)
Lower oil pan gasket - Simca Versailles - Chambord
Lower oil pan gasket - Simca Versailles - Chambord
(35,20 € HT)
copy of Set of 2 multiplier gears "+ 15%" for Citroen HY gearbox
Set of cut-rectified multiplier gears. Allows to lengthen by about 15% all the ratios of the HY gasoline engine gearbox (ONLY on gearboxes equipped with a 21 and 26 tooth set). Concerns the 2 gears at the back of the box.Warning: any change in ...
(1 610,00 € HT)
Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x4 - 8cyl
Segment set Ø 66.04 mm Simca 2.38x2.38x4 - 8cyl
(156,00 € HT)
Front brake cylinder kit 34.9 mm CItroen U23
Repair kit for 1 front wheel cylinder 34.9 mm includes:Kit for one cylinder.
(52,75 € HT)
2-pin push button - 60 Amp - metal body - starter control
(8,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Cooling There are 24 products.
Brushes or carbon for Peugeot 203 403 disengageable water pump
Contact with brushes (carbon) for Peugeot 203 403 disengageable water pump. Delivered with the wire.
(31,00 € HT)
Cap for heating flow diameter 8 mm
Rubber stopper for starting on water pump - 8 mm
(2,08 € HT)
Cap for heating outlet ø 16 mm
Rubber plug for heating outlet on water pump or radiator. Delivered in ø 16mm by default (also available in 14 or 18 mm, just specify when ordering)
(4,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
(10,00 € HT)
Gasket for radiator cap - Peugeot 203 403
(3,00 € HT)
Heating departure 16 mm for hose
Departure to equip a standard hose in the model with departure for heating.Diam. 16 mm
(23,50 € HT)
Heating valve controlled by cable Ø 16 mm
Heating valve controlled by cable Ø 16 mm. Synthetic material (no corrosion problem)Length connection end to other: 91.5 mm
(49,00 € HT)
Heating valve with lever Ø 11,8 mm
Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm
(20,83 € HT)
Heating valve with lever Ø 16 mm
Heating valve with lever Ø 16 mm. Synthetic material (no corrosion problem). Length connection end to other: 113.5 mm
(26,70 € HT)
Peugeot 203 403 lower hose after 05/55
Lower hose for Peugeot 203 or 403 from 05/1955
(24,00 € HT)
Peugeot 203 403 upper hose after 04/55
Upper hose for Peugeot 203 or 403 from 05/1955
(24,00 € HT)
Peugeot 203 lower hose before 05/55
Lower hose before 05/1955. For Peugeot 203. (diam 40mm approximate overall length 27cm)
(27,00 € HT)
Peugeot 203 upper hose before 05/55 and D3 D4
Upper front hose 05/1955. For Peugeot 203 and D3 D4Dimensions:D 45 mm and D 40 mmlength of "L" 200 x 140 mm approx.
(27,50 € HT)
Radiateur neuf à partir de 1955 - Peugeot 203 - 403 - sans échange
(310,00 € HT)
Radiator cap + gasket - Peugeot 203 403
(38,00 € HT)
Sandblasting tablet 52 mm pump side Peugeot 203 403
1 pellet diam. 52mm on cylinder head, behind water pump
(8,25 € HT)
Sandblasting tablets x 2 - 60 mm cylinder head Peugeot 203 403
Set of 2 pellets diam. 60mm on cylinder head for Peugeot 203-403
(15,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Thermostat - calorstat - Peugeot 203 403 404 utility D3 D4
Thermostat - calorstat - Peugeot 203 403 404 utility D3 D4
(17,50 € HT)
Water pump axis 15 non-declutchable pulley - Peugeot 203/403
Water pump axis 15 non-declutchable pulley - Peugeot 203/403
(322,50 € HT)
Ø 16 mm purge te for heating or cooling circuit
Ø 16 mm purge te for heating or cooling circuit
(17,50 € HT)