1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

3/8 - 24 f copper pipe fitting

Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube

Adapter connection 7/16 male - 1/2 female

Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle

Adapter connection 7/16 male - 11/16 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle

Adapter connection 7/16 male - 3/8 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 3/8

Adapter connection 7/16 UNF female - 1/2 UNF male

Adapter connection 1/2 UNF male - 7/16 UNF female

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Brake line - from 100 to 150 cm

" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "

Brake line - from 150 to 200 cm

Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake line - from 51 to 99 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake pipe - from 300 to 350 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake switch - STOP - 10x100 conical - DOT

Brake switch. STOP light function - 10x100 - for DOT liquid

Brake switch - STOP - 10x100 conical - Silicone

Brake switch. STOP light function - 10x100 - for Silicone

Brake switch - STOP - spring-loaded

Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.

Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m

Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 17

Copper gasket 13.1 x 17 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Ecrou

Front brake cylinder 25.4 mm - Panhard Dyna - April 1950 and +

Front L and R brake cylinder Panhard Dyna - April 1950 and +. D 1 "(25.4 mm).Sold individually (1 cylinder per wheel)

€50.40 TTC
(42,00 € HT)

Front wheel brake hose - 380 mm Panhard Dyna

Front wheel brake hose - 380 mm Panhard Dyna - 17 mm male end - for Front wheel L or D. Made in France

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Male thread brake reservoir

Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible

Master cylinder 25.4 mm Panhard Dyna X 86 - April 1950 and +

Master cylinder 25.4 mm Panhard Dyna - April 1950 and +Piston 1 inch or 25.4 mm1/2 output 20 f per inchEntry about 17 mm60 mm center distance for M 8 screws

€62.40 TTC
(52,00 € HT)

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

Rear brake cylinder 19 mm - Panhard Dyna X 86 - 04/1950 at the end

Rear brake cylinder Ø 19 mm - Panhard Dyna X 86 - 04/1950 to endSteel body length: 54 mmFlange hole: 31.8 mmFixing center distance: 25 mm - M6 mm thread

€66.12 TTC
(55,10 € HT)

Rear brake cylinder 22 mm - Panhard Dyna X 86 - light truck

Rear brake cylinder 19 mm - Panhard Dyna X 86 - 04/1950 to end

€87.36 TTC
(72,80 € HT)

Rear wheel brake hose - 250 mm Panhard Dyna

Rear wheel brake hose - 250 mm Panhard Dyna - 17 mm male end. Made in France

Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

Set of 4 relined brake shoes Panhard Dyna x86

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€117.60 TTC
(98,00 € HT)

Set of 4 relined REAR 30mm larg - brake shoes - Panhard

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€102.00 TTC
(85,00 € HT)

Set of 4 relined REAR brake shoes - Panhard

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€117.60 TTC
(98,00 € HT)

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!