3/8 - 24 f copper pipe fitting

Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

cable frein à main secondaire - Simca Versailles chambord (sauf Rushmatic)

Master cylinder 22mm Simca Versailles Chambord

Complete master cylinder D 22 mm. For Simca V8 (Versailles, Chambord, Marly, Ariane 4 and Ariane 8 etc.) before April 1960. Output 1/2 20f / p

€91.20 TTC
(76,00 € HT)

Brake reservoir with nipple + contact

Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level

Rear brake cylinder 18.2 or 19 mm Simca Versailles

Rear wheel cylinder (19 mm piston) can be used to replace models with 18.2 mm piston. The assembly is done in place and allows optimal braking.

€76.20 TTC
(63,50 € HT)

cable frein à main primaire - Simca Versailles chambord

Master cylinder outlet connection with banjo

MASTER CYLINDER OUTLET CONNECTION WITH BANJOBolt M1 / 2 * 20F-F7 / 16 * 20FBanjo D15 F3 / 8 * 24F 84 °

€40.80 TTC
(34,00 € HT)

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Brake reservoir - male thread + electrical contact

Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level

22mm master cylinder kit Simca Versailles Chambord

Complete overhaul kit for 22 mm master cylinder.

€31.20 TTC
(26,00 € HT)

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Front brake cylinder Ø25.4mm Simca Versailles

Front piston wheel cylinder 25.4mm

€92.40 TTC
(77,00 € HT)

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€2.16 TTC
(1,80 € HT)

Front brake cylinder kit 25.4 mm Simca Versailles

Required for front brake cylinder 25.4 mm, with pistons.(for a cylinder)

€41.64 TTC
(34,70 € HT)