12v to 6v regulator for temperature, pressure, fuel gauge

This module allows the use of 6V pressure gauges on a 12V vehicle (negative to ground). Mounts on a temperature gauge, pressure, fuel gauge, ...Very practical, it is fixed directly on the supply terminal of the pressure gauge thanks to a hole ...

Aerosol gasket for cylinder head

Sealing spray varnish to be sprayed on both sides of a cylinder head gasket. Improves sealing, essential with solid copper gaskets (any thickness)

Aviation collex type paste gasket for cylinder head - 450ml

Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...

Battery switch - safety

Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.

Battery switch with key - security

Battery switch with key - security

Calibrouge (Plastigage) mechanical clearance measurement

"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm

Charger and maintenance 6v / 12v Accumate

AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...

Dark green engine paint RAL 6005 - 500 ml

Dark green engine paint RAL 6005 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...

€40.80 TTC
(34,00 € HT)

Double pressure gauge holder

Metal support, black lacquered for standard manometer D52 mm. Ready to fix.

Echappement sangle support renforcé 50 mm

Sangle de suspension pour échappement, caoutchouc armé. entraxe 52 mm pour vis M8 mm.

Engine paint black RAL 9005 - 500 ml

Black paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim 4090), ...

€40.80 TTC
(34,00 € HT)

Engine paint oxide green RAL 6020 - 500 ml

Engine paint oxide green RAL 6020 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...

€40.80 TTC
(34,00 € HT)

Engine red paint - 500 ml -

Engine red paint -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim ...

€40.80 TTC
(34,00 € HT)

Exhaust manifold paint - 250 ml

€48.00 TTC
(40,00 € HT)

Exhaust support strap reinforces 90 mm

Suspension strap for exhaust. Robust construction, reinforced rubber, metal eyelets.92 mm center distance for M8 mm screws.

Exhaust suspension ring 63x96 width 27 mm - Peugeot 203

Suspension ring for Peugeot 203 exhaust and othersDimension approximately 63 x 96 x width 27 mm

Ford RAL 5005 blue engine paint - 500 ml

Ford RAL 5005 blue engine paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with ...

€40.80 TTC
(34,00 € HT)

fuel filter Big size ø 6 and 8 mm

Paper fuel filter for 6 or 8 mm hose.

fuel filter ø 6 and 8 mm

Paper fuel filter for 6 or 8 mm hose.

Fuel hose diam 8 mm - by the meter

8 mm fuel hose sold by the meter.

Gasket paste for motor - auto extrudable cartridge 200 ml

Mot. Silicone gasket & self-extruding housing RTV K164     high-quality, heat-resistant silicone     base: modified oxime silicone (acid-free hardening system)

Gearbox or axle oil SAE 80-140 - IGOL - 1L

Viscosity index 80 - 140API GL-4(Not suitable for Peugeot type screw axles)

Ignition 4 x spark plugs 14mm base Rosengart

Set of 4 NGK std base spark plugs (14 mm), for cylinder head. Specially adapted to pre-war.

Ignition capacitor 6, 12 and 24V

6.12V and 24V compatible ignition capacitor.

Ignition coil 12v standard

Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)

Ignition coil 12v VALEO

Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)

Ignition coil 6V - High Performance

Bosch, NGK or Béru High Performance type ignition coil, guaranteed for use with:- 6 V platinum-plated screw igniter (breakers),- electronic ignition type 123 ignition,- platinum screw igniter + electronic amplification module

IGOL 20W50 mineral oil - 5L can

5 l can (non contractual photo) - Viscosity: 20W-50BenefitsHéRITAGE GTZ mineral oil.Multigrade lubricant for Gasoline and Diesel engines, made from severely refined mineral bases and additives suitable for older engines. The anti-wear additive ...

IGOL Rallye Gear axle transmission oil SAE 75 80 90 - GL4

Oil for gearbox and bridge for old mechanics. Type SAE 75 80 90 - GL4. 1L container.(Not suitable for Peugeot type screw axles)

IGOL semi-synthetic 15W50 oil - 5L can

Can of 5 L.Viscosity: 15W-50BenefitsHéRITAGE ZS semi-synthetic oil.Multigrade lubricant for gasoline engine of tourism, reinforced with synthetic bases, particularly adapted to the old engines, gasoline or diesel, equipped with an oil filter - ...

Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass

Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground

Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - ivory background - for negative to mass

Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground

Metal body battery switch - safety

Coupe batterie - permet d'isoler électriquement la batterie.

Pressure hose for igniter Ø 6 mm - by the meter

Hose to connect the igniter / carburetor depression 6 mm sold by the meter.

Reinforced collar for exhaust - Ø 44-47 mm

Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing

Reinforced collar for exhaust - Ø 52-55 mm

Reinforced collar for exhaust - Ø 52.55 mmRobust French manufacturing

Reinforced collar for exhaust - Ø 64-67 mm

Reinforced collar for exhaust - Ø 64-67 mmRobust French manufacturing

Revue Technique Rosengart LR - RTA

Rosengart crankshaft front bearing

Double row ball bearing, front crankshaft bearing assembly (timing side) for LR2, LR4, LR4N2 engines and derivatives.

Rosengart crankshaft rear bearing

Roller bearing, rear crankshaft bearing assembly (flywheel side) for LR2, LR4, LR4N2 engines and derivatives.

Rosengart dynamo bearing 17x39x9

Bearing for Rosengart dynamo size 17x39x9 type 99203Non contractual photo

Rosengart dynamo bearing 17x42x11

Bearing for Rosengart dynamo size 17x42x11Non contractual photo

Rosengart LR segmentation (12p)

Set of segments for LR2, LR4, LR4N2 engines and derivatives. Bore available from 56 to 58 mm. Version with 3 segments per piston (2 sealed and 1 oil scraper) Contact us to define the height of each segment. Possibility of ordering a set ...

Rosengart LR4 cylinder head gasket and derivatives

Cylinder head gasket for LR2, LR4, LR4N2 and derivatives.

€99.34 TTC
(82,78 € HT)

Rosengart LR6 cylinder head gasket

Cylinder head gasket for LR6 engine and other 6 cylinders Rosengart.

€180.00 TTC
(150,00 € HT)

Segment set Ø 56.00 2x2x3.5x3.5 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.00- 2 x compression h 2mm- 2 x scraper h 3.5 mmContact us for other dimensions.

Segment set Ø 56.50 2x2x2x4 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 3 x high compression 2mm- 1 x high scraper 4 mmContact us for other dimensions.

Segment set Ø 57.00 2x2x2x3 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50.Please note: in the event of an error on your part, these products cannot be taken back.- 3 x compression h 2mm- 1 x scraper h 3 mmContact us for other ...

Segment set Ø 57.50 2x2x3.5x3.5 - Rosengart LR (set of 16)

" Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 and derivatives. Bore 57.50 - 2 x compression h 2mm - 2 x scraper h 3.5 mm Contact us for other dimensions. "

Segment set Ø 58.00 2x2x2x3.5 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50. Be careful in the event of an error on your part, these products cannot be taken back.- 3 x compression h 2mm- 1 x scraper h 3.5 mmContact us for other ...

Segments set Ø 56.00 2.5x2x2.5x4 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.00Contact us for other dimensions.

Serflex collar for gasoline hose diam 8 mm

serflex collar 10-16 mm

Set 4 Pistons 56.00 - axle 16 mm - Rosengart LR

Set of 4 pistons for Rosengart LR2, LR4, LR4N2, and derivatives. Current manufacture - Bore 56.00 - 56.50 - 57.00 - 57.50 - 58.00 mm For 12 mm or 16 mm axle (to be specified when ordering). Supplied with axles, segments, circlips. Possibility of ...

Set 4 Pistons 56.50 - axle 16 mm - Rosengart LR

Set of 4 pistons for Rosengart LR2, LR4, LR4N2, and derivatives. Current manufacture - Bore 56.00 - 56.50 - 57.00 - 57.50 - 58.00 mm For 12 mm or 16 mm axle (to be specified when ordering). Supplied with axles, segments, circlips. Possibility of ...

Set 4 Pistons 57.00 - axle 16 mm - Rosengart LR

Set of 4 pistons for Rosengart LR2, LR4, LR4N2, and derivatives. Current manufacture - Bore 56.00 - 56.50 - 57.00 - 57.50 - 58.00 mm For 12 mm or 16 mm axle (to be specified when ordering). Supplied with axles, segments, circlips. Possibility of ...

Set Segments Ø 56.50 2.5x2.5xscraper 2.5xscraper .5 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 4 x fire segment h 2.5mm- 4 x compression h 2.5mm- 8 x scraper h 2.5 mmPlease note that the scrapers are Ø 56.84 mm. Review the game at the cupContact us ...

Set Segments Ø 57.00 2x2x2x4 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50. Be careful in case of error on your part, these products cannot be taken back.Please note that fitting current rings may require modifying the depth of ...

Set Segments Ø 58.00 2x2x3 - Rosengart LR (set of 12)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 4 x scraper h 3 mmContact us for other sizes.

Set Segments Ø 58.00 2x2x3x3 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 8 x scraper h 3 mmContact us for other sizes.

Spark plug ignition with 18 mm base

NGK big base spark plug (18 mm), for cylinder head. Specially adapted to pre-war. Sold individually

Standard 6V coil ignition

Branded ignition coil guaranteed for use with 6 V platinum-plated igniter (breakers). Impedance respected to prevent the breakers from becoming blue. Also works perfectly with electronic module or integral electronic igniter.

Support de manomètre

Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.

Temperature manometer with probe - black background

Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.

Temperature manometer with probe - ivory background

Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.

Universal bearing grease

For greasing bearings - Water resistant