- New
soufflet universel pour cardan
(24,00 € HT)
- New
soufflet tripode cote boite
(30,00 € HT)
- New
SIMCA Vedette Versailles Chambord nameplate
(8,00 € HT)
- New
Simca break Marly nameplate
(8,00 € HT)
- New
Ford Vedette nameplate
(8,00 € HT)
- New
Facel nameplate
(8,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 66 products.
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(6,08 € HT)
Adapter 3/4 16 M by 1/2 20 F for Renault Colorale Prairie master cylinder
Adapter for master cylinder with 18 mm inlet (3/4 - 16 thread) Renault Colorale, Goélette and derivatives.Mounts on the liquid inlet (coming from the tank) and allows the supply tube to be connected to the VERTICAL. The tube must be fitted with a ...
(20,80 € HT)
Adapter connection 1/2 UNF female - 3/8 UNF male
Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads
(9,90 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(29,00 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
(9,96 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
(15,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(16,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,00 € HT)
Brake cylinder 1 3/8 F - 34.9 mm - Renault Galion
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives. Wheel cylinder. Diam 1 "3/8 or 34.9 mm.Front wheel cylinder. Diam 1 "3/8 or 34.9 mm. Fixing by 2 screws type M8 - Ø liquid inlet = 7/16 pTo recognize the model, it suffices to ...
(78,72 € HT)
Brake cylinder 1 3/8 U - 34.9 mm - Renault Galion
Front wheel cylinder. Diam 1 "3/8 or 34.9 mm. Fixing by 2 screws type US 5/16 - 24f / p Ø liquid inlet = 1/2 pTo recognize the model it is enough to measure the connection which is screwed in the entry of the cylinder = 12.5 mm.For Renault ...
(78,50 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
(29,50 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
(66,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(128,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(155,00 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(180,00 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
(15,83 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
(15,83 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
(42,00 € HT)
Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
(3,00 € HT)
copper gasket kit for front brake cylinder (assembly with hollow screw) - Renault R2087 Goélette Prairie
Set of 2 seals for hollow screw and banjo (for 1 cylinder)
(3,10 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,20 € HT)
Front brake cylinder kit 34.9mm - Renault Galion 1400 kg
Repair kit for AV cylinder. d 34.93 mm
(15,00 € HT)
Front brake hose 450 mm - Renault Galion
Front brake hose - Length 450 mm - 2 threaded ends d 17 mm.
(25,00 € HT)
FRONT brake hose 520 mm Renault Colorale, Prairie, R2087, Goelette
Flexible fein AV. Length 520 mm Renault Prairie, R2087, Schooner etc. External thread (metal color on photo) = 10.9 mm - Internal seam (yellow color on photo) = 11.2 mmRemember to replace the copper gasket on the male thread side.For other ...
(26,00 € HT)
Front brake hose 590 mm Renault Galion
Flexible fein AV. Length 590 mm. Renault Prairie, R2087, Goélette etc. External thread (metal color on the photo) = 10.9 mm - Internal thread (yellow color on the photo) = 11.2 mm.Remember to replace the copper seal on the male thread sideFor ...
(26,00 € HT)
Hydrovac brake assist Renault Galion
Reconditioned vacuum brake assist (hydrovac). Renault assembly or similar vehicle. Complete disassembly, micro balling, replacement of wearing parts, tests. Lacquering. Neat work. The refurbished part is sent after receipt of the used mechanism, ...
(1 329,17 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Master cylinder Renault Galion, 1400 kg
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives. Complete master cylinder. d 38.1 mm. 3-hole fixing. 3 side outlets and 1 at the end.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary ...
(169,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(8,85 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
(5,15 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle
Adaptateur freinage 1/2-20 UNF mâle par 3/8 24 filets femelle
(10,50 € HT)
Rear brake cylinder 44.4 mm - Renault Galion1p 3/4 -
For Renault Galion 2t5 and other derivatives in heavy vehicle version.Wheel cylinder inner diameter 44.5 mm or 1 3/4 inch.Liquid inlet 1/2 20F / P
(153,50 € HT)
Rear brake cylinder kit 44.4 mm -Renault Galion, 1400 kg 2t5
For Renault Galion, 1400 kg, 2t5 and other heavy goods vehicles. Repair kit for 1 rear wheel cylinder 44.5 mmn includes:2 steel pistons, 2 cups, 2 dust covers, 1 springKit for one cylinder.
(57,20 € HT)
Rear brake hose 650 mm Renault Galion
Rear brake hose. Length 650 mm. External thread (metal color on the photo) = 10.9 mm - Internal seam (yellow color on the photo) = 11.3 mm.Remember to replace the copper seal on the male thread sideFor other models, please call us
(26,00 € HT)
Rear brake hose 650mm - Renault Galion
Rear brake hose - 650 mm long - 2 threaded ends d 17 mm.
(33,25 € HT)
Renault Galion master cylinder plug kit, 1400 kg
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives.Kit of 3 caps + 3 copper gaskets for master cylinder.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.
(19,15 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Set of 2 special 5/16 screws / FRONT brake cylinder 34.9 mm - 12.5 mm
Fixing kit for a FRONT brake cylinder 34.9 mm - 12.5 mmAttention only concerns 34.9mm cylinders for 12.5mm connection. The models for 11mm have screws in M8 metric
(6,63 € HT)
Set of 4 relined front brake shoes for Renault Galion
Set of 4 relined brake shoes (Front) in standard exchange for Renault Galion. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...
(120,00 € HT)
Set of 4 relined rear brake shoes for Renault Galion
Set of 4 relined brake shoes (Ar) in standard exchange for Renault Galion. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...
(130,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Tailor-made front or rear brake hose
Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Non contractual image.
(29,50 € HT)