- New
copy of Segment set Ø 67.50 mm Simca Chambord 2 x 2 x 5 - 8cyl
Segment set Ø 67.50 mm Simca 2 x2 x 5 - 8cyl
(167,00 € HT)
- New
- New
Courroie largeur 10 mm moteur 817 - Saviem SG2
(19,80 € HT)
- New
Jauge Peduzzi
(83,00 € HT)
- New
Kit joints adpatable avec joint de cadre pour toit ouvrant - Peugeot 203
(146,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(180,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(137,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(91,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 66 products.
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(6,08 € HT)
7/16 banjo fitting + 7/16 hollow screw + seals
7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm
(27,95 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(29,00 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
(9,96 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
(15,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(16,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,00 € HT)
Brake hose 367 mm - front or rear - Simca Aronde P60
Front or rear brake hose 367 mm long.Male ext 9mm - female int Ø 8.3 mmMounts on Simca Aronde or P60 from Nov 1957 to Dec 1963.Check with your model before ordering.
(21,00 € HT)
Brake hose 378 mm before Simca 9 Jan 53 at the end
Front brake hose. Simca 9 1200 assembly from January 53 to end. Length 378 mm
(26,00 € HT)
Brake hose 493 mm AR - Simca 9 and Aronde - 01/53 to 02/56
Rear brake hose 493 mm - Simca 9 - 1200 cm3 and Aronde - 01/153 to 02/1956
(26,00 € HT)
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
(26,00 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
(66,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(128,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(155,00 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(180,00 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
Brake switch - STOP - 7 / 16-20f / p
Brake switch. STOP light function - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8.Generally mounted after April 1960.Thread 7/16 - 20 thread / inch
(22,50 € HT)
Brake switch - STOP - silicone fluid - 7 / 16-20 th / inch
Brake switch for silicone fluid. STOP light function - Simca Aronde (depending on year) and P60Thread 7/16 - 20 thread / inch
(22,50 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
(42,00 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,20 € HT)
Front and rear brake hose 470 mm - Simca 9 - Debut a 01/53
Front and rear brake hose - 470 mm - Made in France - Simca 9 - 1200 until January 1953
(25,00 € HT)
Front brake cylinder 28.5mm- Simca Aronde sept 51 to jan 53
Front wheel cylinder. Diam 28.5mm. Assembly:- Simca 9 1200 - Aronde - January 51 to January 53
(48,00 € HT)
Front brake cylinders x 2 - cone protruding 28.5mm - Simca Aronde Jan 53 to Nov 57
Pair of front wheel cylinders L and R - d 28.57 mm. 3/8 inlet - protruding cone - Left mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca 9 1200 from 53 to end of series,- Simca Aronde from Jan 53 to Nov 57.
(105,00 € HT)
Front brake cylinders x 2 - cone protruding 28.5mm- Simca Aronde 500 kg - start at 11/57
Pair of front wheel cylinders L and R - d 28.57 mm. 3/8 inlet - protruding cone - Left mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca utility 500 kg from start to 11/57
(105,00 € HT)
Front brake cylinders x2 - 28.5mm -Simca Aronde P60 nov 57 a end
Front wheel cylinder R - d 28.57 mm. Entry 3/8 Left mounting. Length 72 mm - inside liquid passage = 8.5 mm.Aronde and P60 from nov 57 end to end of series
(137,80 € HT)
Front brake cylinders x2 28.5mm - Simca Aronde 500 kg P60 Ranch nov 57 a end
Front wheel cylinder R - d 28.57 mm. 3/8 entry Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca Aronde 500kg nov 57 to 05/62,- Simca P60 500kg and Ranch 12/59 at the end.
(137,80 € HT)
Front or rear brake cylinder 25.4mm - Simca Aronde until Sept 51
Front and rear wheel cylinder d 25.4mm - Simca 9 Aronde up to seven 51
(42,00 € HT)
Front or rear brake hose 367 mm Simca Aronde nov 57 to dec 59
Front or rear brake hose 367 mm long. Male ext 9mm - female int Ø 8.3 mm.Simca Aronde assembly from Nov 57 to Dec 59.
(21,00 € HT)
Master cylinder - Beginning to Nov 57 - Simca Utility 500 kg
Master cylinder, supplied complete with 25.4 mm bellows.Master cylinder - Beginning to Nov 57 - Simca Aronde Utility 500 kg
(108,00 € HT)
Master cylinder - Nov 57 to 06/62 - Simca utility 500kg
Complete master cylinder. Diameter 25.4 mm.Dovetail BreakUtility 500 kgNov. 57 => May 62P60 500 kgDec. 1959 => End of seriesRanch 1960
(121,70 € HT)
Master cylinder from dec 59 to dec 63 - Simca Aronde P60
Complete master cylinder. Diameter 25.4 mm. Assembly from dec 59 to dec 63e:- P60, Montlhéry, Etoile 6 and 7cv, Elysée, from December 1959 to December 1963,
(121,70 € HT)
Master cylinder from start to dec / 59 - Simca 9 and Aronde
Master cylinder, supplied complete with 25.4mm bellows.For Simca 9 and Aronde until dec 1959
(108,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(8,85 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
(5,15 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Rear brake cylinder 22mm - Simca Aronde - Feb 56 to Nov 57
Rear brake cylinder. D 22 mm. Editing: - Simca Aronde February 56 to November 57
(48,50 € HT)
Rear brake cylinder 22mm - Simca Aronde - Jan / 53 to Feb / 56
Rear brake cylinder. D 22 mm. Assembly:- Simca 9 1200 from January 53 to end of series- Dovetail from 01/53 to 02/56
(45,80 € HT)
Rear brake cylinder 22mm - Simca Aronde - Nov 57 to Dec 59
Rear brake cylinder. D 22 mm - 3/8 inlet. Editing: - Simca Aronde November 56 to December 59
(54,10 € HT)
Rear brake cylinder 22mm - Simca Aronde - P60 - Dec 59 to end
Rear brake cylinder. D 22 mm - Entry 3/8. Assembly:Rear brake cylinder - Simca Aronde - P60 -Elysées - Etoile 6 and 7 cv - Dec 59 to end
(54,10 € HT)
Rear brake cylinder 22mm - Simca 9 1200 Aronde - Jan 52 to Jan 53
Rear brake cylinder. D 22 mm. Editing: Simca 9 1200 from January 52 to January 53
(56,55 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Set of 4 front brake shoes Simca Aronde P60 (standard exchange)
Set of 4 relined front brake shoes, in standard exchange for Simca 9 - Aronde - P60 - any model (non-contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. ...
(94,00 € HT)
Set of 4 rear brake shoes - Simca 9 - Aronde P60
Set of 4 rear brake shoes relined, in standard exchange for Simca 9 - Aronde - P60 - any model (non-contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. ...
(94,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Te for Master cylinder 10/57 and fine - Simca Aronde P60
Tee + fitting + gasket
(24,00 € HT)