- New
Courroie largeur 10 mm moteur 817 - Saviem SG2
(19,80 € HT)
- New
Jauge Peduzzi
(83,00 € HT)
- New
Kit joints adpatable avec joint de cadre pour toit ouvrant - Peugeot 203
(146,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(180,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(137,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(91,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(72,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(46,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Cooling There are 22 products.
Aluminum water departure on engine block - Ford star
Aluminum water supply on engine block to radiator - Ford Vedette 1949 to 1954 and Comète 13 hpCareful French manufacturing - machined and welded aluminum.Two parts are needed per engine. Sold individually.
(91,80 € HT)
Cap for heating flow diameter 8 mm
Rubber stopper for starting on water pump - 8 mm
(2,08 € HT)
Cap for heating outlet ø 16 mm
Rubber plug for heating outlet on water pump or radiator. Delivered in ø 16mm by default (also available in 14 or 18 mm, just specify when ordering)
(4,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
(10,00 € HT)
Ford Vedette dynamo-fan belt
Secondary propeller-dynamo belt for Ford Vedette
(15,00 € HT)
Ford Vedette large model radiator cap
Radiator cap, large model. For radiator neck approx. 66 mm Valve diameter approx. 49 mm
(35,30 € HT)
Ford Vedette Simca V8 Calorstat Thermostat
" Thermostat for cooling circuit. For V8 Vedette Ford and Simca Versailles, Chambord, Vendôme, Monte Carlo etc. (Two thermostats per V8 engine). Sold individually. "
(20,00 € HT)
Ford Vedette water pump belt
Main belt connecting water pumps-crankshaft-fan
(20,00 € HT)
Heating departure 16 mm for hose
Departure to equip a standard hose in the model with departure for heating.Diam. 16 mm
(23,50 € HT)
Heating valve controlled by cable Ø 16 mm
Heating valve controlled by cable Ø 16 mm. Synthetic material (no corrosion problem)Length connection end to other: 91.5 mm
(49,00 € HT)
Heating valve with lever Ø 11,8 mm
Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm
(20,83 € HT)
Heating valve with lever Ø 16 mm
Heating valve with lever Ø 16 mm. Synthetic material (no corrosion problem). Length connection end to other: 113.5 mm
(26,00 € HT)
High hose for Ford Vedette
High hose for V8 Ford Vedette etc. (2 per engine) Sold individually.
(54,40 € HT)
Low hose for Ford Vedette
Low hose for Ford Vedette. (2 hoses per vehicle). Delivered individually. Add a stainless steel T if leaving to the heating radiator (available in the shop). Depending on the radiator model, length to be cut.
(21,00 € HT)
Radiator cap small model Ford Vedette Simca
Radiator cap, small model. For radiator neck approx. 56 mm Valve diameter approx. 39 mm
(27,88 € HT)
Stainless heating steel T hose for Ford Vedette
Stainless steel T allowing the heating return to be connected to the lower main radiator hose. Ford Vedette, Vendôme or other vehicle using this system.
(30,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Temperature manometer with probe - ivory background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Water pump repair kit with aluminum impeller - Ford Vedette
Repair kit for water pump for "Y" or "T" pump body - years 1949-54. New axle is 16mm instead of 12 mm. So you need to drill body 16.5 mm. We recommend correcting the seat of the rotating joint at the back of the body.
(151,20 € HT)
Ø 16 mm purge te for heating or cooling circuit
Ø 16 mm purge te for heating or cooling circuit
(17,50 € HT)