soufflet universel pour cardan
(24,00 € HT)
soufflet tripode cote boite
(30,00 € HT)
SIMCA Vedette Versailles Chambord nameplate
(8,00 € HT)
Simca break Marly nameplate
(8,00 € HT)
Ford Vedette nameplate
(8,00 € HT)
Facel nameplate
(8,00 € HT)
Simca Marly wheel shaft stop ring
(27,80 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Engine There are 32 products.
12v to 6v regulator for temperature, pressure, fuel gauge
This module allows the use of 6V pressure gauges on a 12V vehicle (negative to ground). Mounts on a temperature gauge, pressure, fuel gauge, ...Very practical, it is fixed directly on the supply terminal of the pressure gauge thanks to a hole ...
(30,00 € HT)
4 exhaust valves 37 x 105.5 x 9 mm - Citroen HY engine ID19
4 exhaust valves 35 x 105.5 x 9 mm - Citroen HY from 1963 and Citroen DS and ID until 1965
(68,03 € HT)
4 intake valves 42 x 107.7 x 9 mm - Citroen HY engine ID19
4 intake valves 42 x 107.7 x 9 mm - Citroen HY from 1963 and Citroen DS and ID until 1965
(68,03 € HT)
78mm domed piston liners kit - Citroen HY - U23
Set of 4 liners + 4 complete domed head pistons (segments, clips, pins) - Assembly with 3 quality segments.Non contractual photo
(374,50 € HT)
Axe 8 mm avec papillon pour réparation carburateur Solex 32 PBIC ou similaire
(22,00 € HT)
Axle 8.5 mm Ø repair - without butterfly - Solex 32 PBIC or similarsimilar
Shaft dimension repair 8.5 mm without butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm
(14,13 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
(9,00 € HT)
Bearing bearings 53.50mm - dimension 0.50 - without cheek - Citroen HY
Bearing bearings dimension 0.50 -For HY H72 or H78 engine
(138,00 € HT)
Bearings 54.00mm - STD dimension - without cheek - Citroen HY
Bearing bearings dimension 50.00 (STD) -For ID 19 engine and similar engine block
(148,00 € HT)
Dark green engine paint RAL 6005 - 500 ml
Dark green engine paint RAL 6005 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
(10,00 € HT)
Ducellier head ignition 65 mm for R5/R6/...CX/DS/...204/304...
Head for Ducellier lighter: Fitting inside the head = 65 mm, outside about 72 mm.For Renault R5/R6/R8/R10/R12/R15/R16/R20, Citroen CX/DS/ID/H/HY/HZ, Peugeot 204/304/306/404/504/j7
(20,42 € HT)
Electronic ignition - Citroën HY
123 Ignition electronic ignition for Citroën Type H 4 cylinders, "Perfo" or "11D" engine.Installs in place of your original model. Everything is integrated in the body of the igniter (no remote box).Supplied with adjustment and assembly ...
(295,00 € HT)
Engine gaskets set Ø 90 - Citroen DS 21 - Dsuper 5 - 21 IE
Engine gaskets kit Citroen DS 21 - Dsuper 5 - 21 IE. From 09/1968 to end of productionBore Ø 90 mm
(60,95 € HT)
Engine paint oxide green RAL 6020 - 500 ml
Engine paint oxide green RAL 6020 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)
Engine red paint - 500 ml -
Engine red paint -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim ...
(34,00 € HT)
Exhaust manifold paint - 250 ml
(40,00 € HT)
Fuel needle - Solex 32 PBIC carburettor or similar
Fuel needle - Solex 32 PBIC carburettor or similar
(9,90 € HT)
Gasket paste for motor - auto extrudable cartridge 200 ml
Mot. Silicone gasket & self-extruding housing RTV K164 high-quality, heat-resistant silicone base: modified oxime silicone (acid-free hardening system)
(35,00 € HT)
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Ignition set of Ducellier breakers
Set of breakers for Ducellier distributor For Renault Prairie, R2087, Goélette and derivatives
(12,00 € HT)
Rubber on heating adjustment button - HY - ID 19 - DS (except pallas)
Rubber on heating adjustment button - HY DS (except pallas)
(7,50 € HT)
Set of 4 Cylinder liner gasket ring - Citroen Traction U23 HY
Set of 4 single liner base gaskets - Citroen Traction U23 HY
(10,00 € HT)
Shaft 8.5 mm Ø repair - repair Solex 32 PBIC carburettor or similar
Shaft dimension repair 8.5 mm with butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm
(22,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Temperature manometer with probe - ivory background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)