- New
controle +réglage au banc allumeur
(60,00 € HT)
- New
Rotule direction côté crémaillère - Cityroen Traction 11 - 15 cv et HY
(65,00 € HT)
- New
rectif 12 soupapes
(98,00 € HT)
- New
Valves x 6 - EXH Ø 33,8x9x115,25mm - Citroen Traction 15cv
Set of 6 EXHAUST valves Ø 33,8x9x115,25mm - Citroen Traction 15cv
(148,00 € HT)
- New
lot stud / Fmartin
(145,00 € HT)
- New
copy of Water pump overhaul kit with turbine - Citroen HY
Water pump overhaul kit with turbine - Citroen HY
(87,00 € HT)
- New
Regarnissage sangle de freinage 400 x 38 mm - unitaire
(85,00 € HT)
- New
Forfait : remplacement glace d'appui +clinquant + ressorts
(90,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,50 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(76,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,50 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 47 products.
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
22mm master cylinder kit Simca Versailles Chambord
Complete overhaul kit for 22 mm master cylinder.
(26,00 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(6,50 € HT)
Brake reservoir - male thread + electrical contact
Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level
(39,50 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(40,00 € HT)
Brake switch - STOP - 7 / 16-20f / p
Brake switch. STOP light function - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8.Generally mounted after April 1960.Thread 7/16 - 20 thread / inch
(23,15 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
(16,29 € HT)
Brake switch - STOP - silicone fluid - 7 / 16-20 th / inch
Brake switch for silicone fluid. STOP light function - Simca Aronde (depending on year) and P60Thread 7/16 - 20 thread / inch
(23,15 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
(16,29 € HT)
cable frein à main primaire - Simca Versailles chambord
(75,00 € HT)
cable frein à main secondaire - Simca Versailles chambord (sauf Rushmatic)
(90,00 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,30 € HT)
Flexible rear brake hose 349 mm Simca Versailles Chambord Ariane
Flexible rear brake hose 349 mm long. Male ext 9mm - female int Ø 8.3 mm. Don't forget to replace the copper gasket: click here a> (The vehicle has only 1 rear flexible) - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and ...
(27,00 € HT)
Front brake cylinder D Ø 28.5 mm - with Simca Chambord bleeder
" Front right wheel brake cylinder, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until September 1965 Diameter 28.57 mm "
(56,00 € HT)
Front brake cylinder L Ø 28.5 mm - with bleeder - Simca Chambord
" Left front wheel brake cylinder, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until sept. 1965 Diameter 28.57 mm "
(56,00 € HT)
Front brake cylinder repair kit Ø 28.5 mm - Simca Chambord
Required overhaul for 1 front wheel cylinder. Diameter 28.57 mm
(20,35 € HT)
Front brake cylinder Ø 28.5 mm - set of 4 - Simca Chambord
Set of 4 front brake cylinders. -Simca Beaulieu, Chambord, Présidence as well as Ariane 4 and Ariane 8 - Simca 1300 until September 1965.Comprises: one cylinder with left bleed, one with right bleed and two cylinders without bleed.Diameter 28.57 ...
(216,00 € HT)
Front brake cylinder Ø 28.5 mm - without bleeder (L and R) - Simca Chambord
Front wheel brake cylinder, without bleeder. Right or Left mounting. Diameter 28.57 mmLiquid inlet 3/8Simca Beaulieu, Chambord, Présidence as well as Ariane 4 and Ariane 8 - Simca 1300 until September 1965.
(52,00 € HT)
Front brake hose 349 mm Simca Versailles Chambord Ariane
Front brake hose 349 mm long. (The vehicle has 2 front hoses) For Simca V8, Versailles, Regence, Chambord, Présidence, Trianon, Marly, Ariane 4 and Ariane 8, etc.
(27,00 € HT)
Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
(35,00 € HT)
Master cylinder 22mm Simca Chambord 04/1960 to end
" Complete master cylinder D 22 mm. Outlet in 7/16 20f / p - Delivered complete with adapter and vertical outlet (as the photo) For Simca V8 (Beaulieu Chambord, Présidence, Marly, Ariane 4 and Ariane 8, etc.) from April 1960 until the end of ...
(88,00 € HT)
Master cylinder 22mm Simca Versailles Chambord
Complete master cylinder D 22 mm. For Simca V8 (Versailles, Chambord, Marly, Ariane 4 and Ariane 8 etc.) before April 1960. Output 1/2 20f / p
(76,00 € HT)
Master cylinder outlet connection with banjo
MASTER CYLINDER OUTLET CONNECTION WITH BANJOBolt M1 / 2 * 20F-F7 / 16 * 20FBanjo D15 F3 / 8 * 24F 84 °
(33,54 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(9,00 € HT)
Rear brake cylinder L or R (incoming) 23.8 mm - Simca Chambord
Rear wheel cylinder. Left or Right mounting - Simca Beaulieu Chambord Presidence Marly Ariane 4 and Ariane 8. Diameter: 23.81 mm - Version with cone entering the bottom of the thread at the liquid inlet. See detail photo.
(51,25 € HT)
Rear brake cylinder L or R (outgoing) 23.8 mm - Simca Chambord
" Rear wheel cylinder. Left mount or Right - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8. Diameter: 23.81 mm. Version with cone protruding from the bottom of the thread at the liquid inlet. See detail photo. "
(52,00 € HT)
Rear brake cylinder rebuild kit 19mm - Simca Chambord
" Complete overhaul kit for a rear wheel cylinder. Diameter: 23.81 mm "
(20,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,50 € HT)
Set of 4 relined front brake shoes Simca Chambord
" Set of 4 relined brake shoes (Av) for Simca V8 in standard exchange. Microblasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets which can damage the drums. Shipping upon receipt of worn parts. "
(155,00 € HT)
Set of 4 relined rear brake shoes Simca Chambord
Set of 4 relined brake shoes (AR) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
(116,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)