1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

3/8 - 24 f copper pipe fitting

Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm

7/16 banjo fitting + 7/16 hollow screw + seals

7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube

Adapter connection 7/16 male - 1/2 female

Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle

Adapter connection 7/16 male - 11/16 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle

Adapter connection 7/16 male - 3/8 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 3/8

Adapter connection 7/16 UNF female - 1/2 UNF male

Adapter connection 1/2 UNF male - 7/16 UNF female

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Brake hose 412 mm front Dyna Z

Front brake hose Dyna Z Panhard - 1954 to June 1958 - length 412 mm

Brake hose 445 mm front Dyna Z

Front brake hose Dyna Z Panhard - May 1958 at the end - length 445 mm

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Brake line - from 100 to 150 cm

" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "

Brake line - from 150 to 200 cm

Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake line - from 51 to 99 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake pipe - from 300 to 350 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake switch - STOP - spring-loaded

Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.

Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m

Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm

cFront left brake cylinder - d 31.75 mm - inclined - Panhard Z1

Front left brake cylinder - d 31.75 mm - inclined - Panhard Z1

€126.00 TTC
(105,00 € HT)

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 17

Copper gasket 13.1 x 17 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Cylinder - front copper seal kit for one wheel - Panhard Dyna Z

Set of 2 seals for hollow screw and banjo (for 1 cylinder)Internal Ø 11 mm and 15 mm

€3.72 TTC
(3,10 € HT)

Cylindre de frein avant Droit - d 31.75 mm - incliné - Panhard Z1

€126.00 TTC
(105,00 € HT)

Cylindre frein arrière 22 mm - Panhard Dyna Z - montage RECORD

Rear L and R brake cylinder Panhard Dyna - Diam 22mm - RECORD.Sold individually (1 cylinder per wheel)

€76.80 TTC
(64,00 € HT)

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Dyna Z rear brake hose 412 mm

Rear brake hose Dyna Z Panhard - from 1954 to late - length 412 mm

Ecrou

Ensemble banjo incliné 7/16 + vis creuse 7/16 - Panhard Z1 + joints

€66.00 TTC
(55,00 € HT)

Front brake cylinder 28.5mm -Panhard Dyna Z from 1958

Front wheel cylinder Dyna Z Panhard - from 1958 to the end - d 28.57 mm. G or D mounting.

€81.12 TTC
(67,60 € HT)

Front brake cylinder 31.7mm -Panhard Dyna Z

Front wheel cylinder DYna Z Panhard - 1954 until June 1958 - d 31.75 mm

€50.58 TTC
(42,15 € HT)

FRONT LEFT 28.5mm brake cylinder - Panhard PL 17 - 60 a 62

Front wheel cylinder L PL17 from 1960 to March 62 - d 28.57 mm. Entry 3/8 - Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm

€81.60 TTC
(68,00 € HT)

FRONT LEFT 28.5mm brake cylinder - Panhard PL 17 - Record mounting - 04/62 and fin

Front wheel cylinder L PL 17 - Record mounting - 04/62 and fine - d 28.57 mm. Left mounting.64 mm long - inside liquid passage = 10 mm

€66.00 TTC
(55,00 € HT)

FRONT RIGHT 28.5mm brake cylinder - Panhard PL 17 - 60 to 62

Front wheel cylinder L PL17 from 1960 to March 62 - d 28.57 mm. Entry 3/8 - Right mounting. Length 72 mm - inside liquid passage = 8.5 mm

€81.60 TTC
(68,00 € HT)

FRONT RIGHT 28.5mm brake cylinder- Panhard PL 17 - Record mounting - 04/62 and fin

Front wheel cylinder L PL 17 - Record mounting - 04/62 and fine - d 28.57 mm. RIGHT Mount64 mm long - inside liquid passage = 10 mm

€66.00 TTC
(55,00 € HT)

Front wheel cylinder DYna Z Panhard - 1954 until June 1958 - d 31.75 mm

Rear wheel cylinder Dyna Z Panhard - May 1955 to June 1958 - d 22 mm

€70.80 TTC
(59,00 € HT)

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Male thread brake reservoir

Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible

Master cylinder 25.4 mm - Panhard Dyna Z

Complete master cylinder (piston d 25.4 mm). Fits Dyna Z 1954 thru June 1958.Piston 1 p or 25.4 mm1/2 output 20 f per inchEntry about 17 mm60 mm center distance for M 8 screws

€62.40 TTC
(52,00 € HT)

Master cylinder Panhard Dyna Record mount - 25.4 mm - DOT

Complete master cylinder for Dyna - Record type mounting. Includes:For DOT liquid use. Otherwise choose the reference for the 100% SILICONE liquid- master cylinder 25.4 mm- 3-way 7/16 connection- stop switch- 2 x copper gasket

€137.28 TTC
(114,40 € HT)

Master cylinder Panhard Dyna Record mount - 25.4 mm - SILICONE

Complete master cylinder for Dyna - Record type mounting. Includes:For liquid use 100% SILICONE. Otherwise choose the reference for the traditional DOT.- master cylinder 25.4 mm- 3-way 7/16 connection- stop switch- 2 x copper gasket

€137.28 TTC
(114,40 € HT)

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end

Rear wheel cylinder 19mm  - Panhard 24 équipé frein à tambours - 07/1964 à fin de série

€69.12 TTC
(57,60 € HT)

Rear brake cylinder 19mm - Panhard Dyna Z fromJul 58

Rear wheel cylinder Dyna Z Panhard - from Jul 58 - ø 19 mm

€63.96 TTC
(53,30 € HT)

Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

Set of 4 relined brake shoes Panhard Dyna x86

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€117.60 TTC
(98,00 € HT)

Set of 4 relined REAR 30mm larg - brake shoes - Panhard

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€102.00 TTC
(85,00 € HT)

Set of 4 relined REAR brake shoes - Panhard

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€117.60 TTC
(98,00 € HT)

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!