1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

3/8 - 24 f copper pipe fitting

Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm

7/16 banjo fitting + 7/16 hollow screw + seals

7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube

Adapter connection 1/2 UNF female - 3/8 UNF male

Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads

Adapter connection 7/16 male - 1/2 female

Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle

Adapter connection 7/16 male - 11/16 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle

Adapter connection 7/16 male - 3/8 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 3/8

Adapter connection 7/16 UNF female - 1/2 UNF male

Adapter connection 1/2 UNF male - 7/16 UNF female

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Brake clip spring kit - front wheels - Peugeot 403

Brake spring kit for front wheel - Peugeot 403

Brake hose - FF - 493 mm rear Peugeot 403

Front brake hose length 490 mm - Two female-female endsOutside diam: 15.6 mmInternal diam: 10mm

Brake hose 412 mm front Peugeot 403

Front brake hose for Peugeot 403 all models - Length 412 mm

Brake hose 493 mm rear Peugeot 403

Rear brake hose for Peugeot 403 all models - Length 493 mm

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Brake line - from 100 to 150 cm

" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "

Brake line - from 150 to 200 cm

Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake line - from 51 to 99 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake pipe - from 300 to 350 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake reservoir - male thread + electrical contact

Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level

Brake reservoir with nipple + contact

Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level

Brake reservoir with rubber

Translucent tank, delivered with bracket; rubber plug and fitting.

Brake switch - stop - DOT 3 and 4

" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "

Brake switch - stop - special silicone

Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread

Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m

Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm

Contactor: copper seal kit for LONG stop contactor 022114

Set of 2 seals for STOP LONG contactor

€3.60 TTC
(3,00 € HT)

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 17

Copper gasket 13.1 x 17 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Ecrou

Front brake cylinder - Kit of 4 pieces 28.5mm - Peugeot 403 ALL models

4 front brake cylinders kit - Ø 28.57 mm - 7/16 inlets - Peugeot 403 ALL modelsThe kit includes:- 2 upper FRONT cylinders- 2 lower FRONT cylindersFrench manufacturing - NON-CONTRACTUAL photo.

€242.40 TTC
(202,00 € HT)

Front brake cylinder rebuild kit Ø 28.5 mm - PEUGEOT 403

Necessary reconditioning for 1 front wheel cylinder. Diameter 28.57 mm

€24.42 TTC
(20,35 € HT)

Front upper brake cylinder L or R 28.5mm - Peugeot 403

Single piston cylinder with bleeder for front wheel - Peugeot 403 all models - Ø 28.57 mm. Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front of a 403) - NON CONTRACTUAL photo.

€61.50 TTC
(51,25 € HT)

Lower front brake cylinder L or R 28.5 -Peugeot 403

Single piston cylinder without bleeder for front wheel - Peugeot 403 all models - Lower left or right mounting - French manufacture - (2 upper cylinders and 2 lower cylinders are needed to equip the front of a 403) - NON CONTRACTUAL photo.

€61.50 TTC
(51,25 € HT)

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Male thread brake reservoir

Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible

Master cylinder 22 mm Peugeot 403 - 03/56 to 04/62

Complete master cylinder D 22 mm. For Peugeot 403 - 03/56 to 04/62Output 1/2 20f / p.

€88.62 TTC
(73,85 € HT)

Master cylinder 25.4 mm Peugeot 403

Complete master cylinder D 25.4 mm. For Peugeot 403.Piston 1 p or 25.4 mm1/2 output 20 f per inchEntry about 17 mm60 mm center distance for M 8 screwsThere is also a 22 mm model, available on our store.

€62.40 TTC
(52,00 € HT)

Master cylinder 25.4 mm Peugeot 403 gasoline or diesel utility vehicles

Complete master cylinder D 25.4 mm. For Peugeot 403 petrol or diesel utility vehiclesPiston 1 p or 25.4 mm1/2 output 20 f per inchEntry about 17 mm60 mm center distance for M 8 screws

€62.40 TTC
(52,00 € HT)

Master cylinder Ø 25.4 mm - Peugeot 403

Repair kit for Ø 25.4 mm master cylinder

€26.22 TTC
(21,85 € HT)

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

Peugeot 403 rear brake shoe set - 35 mm

Set of 4 rear brake shoes relined, in standard exchange. Peugeot 403 assembly. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished ...

€102.00 TTC
(85,00 € HT)

Peugeot 403 truck 28.5mm rear cylinder required

" Front wheel cylinder repair kit, with pistons and spring. (For one wheel) Piston diameter = 28.57 mm "

€24.30 TTC
(20,25 € HT)

Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.

Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir

Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm

Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)

Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle

Adaptateur freinage  1/2-20 UNF mâle par 3/8 24 filets femelle  

Rear brake cylinder 25.4 mm - Peugeot 403

Rear wheel cylinder repair kit, with pistons and spring. (For one wheel)Piston diameter = 25.4 mm

€26.22 TTC
(21,85 € HT)

Rear brake cylinder 25.4mm - Incoming cone - Peugeot 403

Rear brake cylinder - with entering cone - D 1 "(25.4 mm).Sold individually (1 cylinder per wheel)

€50.40 TTC
(42,00 € HT)

Rear brake cylinder 25.4mm - cone protruding - Peugeot 403

Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16. Exiting cone visible at the bottom of the liquid inlet on the cylinder.Non contractual photo.

€58.80 TTC
(49,00 € HT)

Rear brake spring kit - Peugeot 403

Rear brake springs and clips kit - Peugeot 403

Rear LEFT brake cylinder 28.5mm -Peugeot 403 L - utility - 07/56 at the end

LEFT REAR wheel brake cylinder.403 Utility and LgasolineJul. 1956 =>End of series403 Diesel utilityOct. 1959 =>End of series403 L dieselNov. 1959 =>End of series

€60.60 TTC
(50,50 € HT)

Rear right brake cylinder 28.5mm -Peugeot 403 L - utility - 07/56 at the end

RIGHT REAR wheel brake cylinder.403 Utility and LgasolineJul. 1956 =>End of series403 Diesel utilityOct. 1959 =>End of series403 L dieselNov. 1959 =>End of series

€60.60 TTC
(50,50 € HT)

Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

Set of 4 front brake shoes - 53 mm - Peugeot 403

Set of 4 relined front brake shoes, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake ...

€132.00 TTC
(110,00 € HT)

Set of 4 front brake shoes 403 Utility U8 - 50mm - Peugeot

Set of 4 front brake shoes - width 52 mm - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€138.00 TTC
(115,00 € HT)

Set of 4 rear brake shoes 403 UtilityU8 Peugeot

Set of 4 rear brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€139.20 TTC
(116,00 € HT)

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!