- New
copy of Segment set Ø 67.50 mm Simca Chambord 2 x 2 x 5 - 8cyl
Segment set Ø 67.50 mm Simca 2 x2 x 5 - 8cyl
(167,00 € HT)
- New
- New
Courroie largeur 10 mm moteur 817 - Saviem SG2
(19,80 € HT)
- New
Jauge Peduzzi
(83,00 € HT)
- New
Kit joints adpatable avec joint de cadre pour toit ouvrant - Peugeot 203
(146,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(180,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(137,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(91,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Trains and suspension There are 21 products.
Axle seal ring 35x68 - Simca Ariane
" Sealing ring axle nose. About 35 x68 mm (non contractual photo) "
(13,10 € HT)
Cross shaft transmission Simca Versailles Chambord
Transmission shaft crosspiece Simca Trianon, Versailles, Marly, Beaulieu, Chambord, Presidence.23.8 mm x 61.3 mm - assembly with external circlips (supplied with each spider). Check your dimensions precisely because other models have been fitted. ...
(30,00 € HT)
Front hub kit Simca Versailles - Chambord 58/60
Front hub repair kit with D 19mm spindle, for Trianon, Versailles, Régence, Marly 1. All models (except 1954), including Chambord 58 to 601 outer conical bearing1 internal tapered bearing1 sealed ringValid for one wheel. Be careful not to fit on ...
(82,00 € HT)
Front hub sealing ring - Simca Chambord 61 or Ariane
Front hub sealing ring - Simca Chambord 61 or Arianeapprox.41.4 x 62 x 12.2
(14,17 € HT)
Front shocks Simca Versailles Chambord Ariane
Front shock absorbers for Simca Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord and Présidence. New products of current manufacture of the Record brand, 100% conform to the original assembly. Supplied with protective bellows.Sold ...
(232,50 € HT)
Gearbox or axle oil SAE 80-140 - IGOL - 1L
Viscosity index 80 - 140API GL-4(Not suitable for Peugeot type screw axles)
(20,00 € HT)
IGOL Rallye Gear axle transmission oil SAE 75 80 90 - GL4
Oil for gearbox and bridge for old mechanics. Type SAE 75 80 90 - GL4. 1L container.(Not suitable for Peugeot type screw axles)
(15,00 € HT)
Rear shocks Simca Versailles Ariane Chambord
Rear shock absorbers for Simca Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord and Présidence.Record brand, 100% conforms to the original assembly.Price of the pair.
(158,50 € HT)
Set of 2 heads for Simca Versailles Chambord Ariane
Set of 2 steering ball joints to equip one side of the front train - Simca Versailles, Chambord, Ariane and derivatives. Includes:- 1 x long ball joint,- 1 x short ball joint,(the adjusting sleeve is not delivered - allows one side of the front ...
(207,92 € HT)
Shock absorber oil Simca Versailles Chambord
Oil intended for filling front shock absorbers for Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane. 1L container. (Non contractual photo)
(20,79 € HT)
Silent bloc pour barre stabilisatrice Ø 19 mm Simca Chambord
Silent bloc pour liaison entre barre stabilisatrice et pivot de suspension monté sur Simca Chambord , Beaulieu Présidence et Marly II. Filetage de barre stabilisatrice en 19 mm - Diamètre intérieur silents bloc = 23.6 mm - diam ext conique 33 à ...
(37,40 € HT)
Silent block for stabilizer bar on front axle - Simca Versailles-Chambord
4 Silent block for stabilizer bar on front axle. On Simca Versailles and Chambord
(64,00 € HT)
Silent block rear suspension blades (for two sides) - Simca Versailles Chambord
Set of 12 silent blocks to renovate the two sets of rear suspension blades. (includes 4 long and 8 short)Quality manufacturing in Nitrile, shore life 70, casting with a pressure steel mold (no inclusion).The price allows to equip a vehicle. ...
(117,40 € HT)
Simca Chambord 61 front hub kit
Front hub repair kit with D 20mm spindle, for Beaulieu, Chambord, Présidence and Marly 2 model 61.1 outer conical bearing1 internal conical bearing1 sealed ringValid for one wheel. Attention do not mount on model 1958 to 60 with Ø 19 mm ...
(84,10 € HT)
Simca Chambord Ariane rear hub bearing kit
Rear hub kit (for 1 wheel) including:1 x sealed bearing (remove the inner side flange)1 x sealing ring (spi) outer side1 x waterproof ring (spinnaker) on the inner side of the deck.It is better to replace both sides at the same time.Mounts on ...
(39,29 € HT)
Spinnaker nose ring 38x78 special - Simca Marly
Sealing ring on bridge nose. Supplied with adapter ring.Special model for Simca MArlyApprox.38 x 78mm(Non contractual photo)
(45,20 € HT)
Spinnaker seal ring 38x73 - Simca Versailles Chambord
" Sealing ring on bridge nose. Supplied with adapter ring. About 38 x 73 mm (non contractual photo) "
(45,20 € HT)
Steering gear on chassis - Simca Versailles - Chambord - Ariane
Steering gear on chassis - Simca Versailles - Chambord - Ariane
(214,00 € HT)
Suspension pivot Simca Versailles Chambord Ariane
Standard ball joint replacement for the lower suspension pivot. The arm is delivered with the ball joint mounted and ready for reassembly. Assembly for Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord, Présidence and Ariane. The ...
(352,00 € HT)
Tie rod with steering ball joints - Simca Versailles Chambord
Tie rod with steering ball joints - Simca Versailles, Chambord and derivatives. Does not fit on Ariane:- 2 x ball joints + mounted bar.Please note this product is in standard exchange.
(210,00 € HT)
