3/8 - 24 f copper pipe fitting

Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube

Brake hose 380 mm - 3/8 - Peugeot 404

Flexible 380 mm - 3/8

Brake master cylinder Ø 31.75 mm - Peugeot 404 Thermostable

Brake master cylinder Ø 31.75 mm - Peugeot 404 Thermostable

€117.60 TTC
(98,00 € HT)

Brake reservoir - male thread + electrical contact

Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level

Brake switch - stop - DOT 3 and 4

" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "

Brake switch - stop - special silicone

Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread

Contactor: copper seal kit for LONG stop contactor 022114

Set of 2 seals for STOP LONG contactor

€3.60 TTC
(3,00 € HT)

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 11.50 x 20 for front brake hose - Peugeot 404

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 17

Copper gasket 13.1 x 17 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Ecrou

Front brake hose 356 mm - Peugeot 404 sedan - injection coupé cabriolet according to year

Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Saloon 07/60 end of series- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series EXCEPT ...

Front brake hose 381 mm - Peugeot 404 sedan

Flexible 381 mm front404 Sedan Oct 1965 to Oct 67404 Diesel Sedan Oct 1965 to Sep 68

Front brake hose 412 mm - Peugeot 404 sedan - debut a 07/60

Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Sedan start at 07/60- For other models, please call us

Front brake spring kit - hydrovac - Peugeot 404 - 10/67 a 69

Hydrovac brake spring kit - front wheels - Peugeot 404 10/67 to 69

FRONT brake spring kit - hydrovac Peugeot 404 - oct / 64 a 67

Front wheel brake spring kit - braking with hydrovac Peugeot 404 - oct 64 to 67

FRONT brake spring kit - Peugeot 404 - WITHOUT hydrovac

Brake spring kit for front wheels WITHOUT hydrovac Peugeot 404

Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable

Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...

€61.50 TTC
(51,25 € HT)

kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem

Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.

Male thread brake reservoir

Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible

Master cylinder 22mm - Peugeot 404 ALL models except Thermostable

Brake master cylinder 22mm - Peugeot 404 ALL models except Thermostable - Outlet Ø 1/2 20 f / p

€88.62 TTC
(73,85 € HT)

Rear brake cylinder - 25.4mm - Peugeot 404 (click on detail)

Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16 e piston Ø 25.4 mm.Exiting cone visible at the bottom of the liquid inlet on the cylinder.404 assembly:- petrol sedan: start at 10/67- Diesel sedan: start at 09/68- Coupe convertible ...

€58.80 TTC
(49,00 € HT)

Rear brake cylinder 25.4mm - 3/8 - Peugeot 404 - Diesel sedan 10/65 to 09/68

Rear brake cylinder - Peugeot 404 - Diesel sedan 10/65 to 09/68Liquid inlet 3/8 - measurement on the male connection = 9.5 mm

€49.44 TTC
(41,20 € HT)

Rear brake cylinder 25.4mm - 3/8 - Peugeot 404 - petrol berline 10/65 to 10/67

Rear brake cylinder - Ø 25.4 mm - Liquid inlet with outgoing cone - Peugeot 404 - petrol sedan 10/65 to 10/67Liquid inlet 3/8 - measurement on the male connection = 9.5 mm

€49.44 TTC
(41,20 € HT)

Rear brake hose 303 mm - Peugeot 404

Flexible 303 mm front404 Heat-stable sedan oct 1965 end of series404 Coupé Cabriolet Oct 1965 end of series

Rear brake hose 460 mm - Peugeot 404 sedan injection coupe cab (depending on the year)

Front brake hose 460 mm long - please check the correspondence with your model before ordering.- 404 Sedan start at 02/63- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series- For other models, please ...

Rear brake springs and clips kit - Peugeot 404 all models

Rear brake springs and clips kit - Peugeot 404 all models

Rear left brake cylinder 28.5mm - 3/8 - Peugeot 404 - truck 10/65 to 10/67

Rear left brake cylinder 28.5mm - 3/8 - Peugeot 404 - truck 10/65 to 10/67

€64.62 TTC
(53,85 € HT)

Rear right brake cylinder 28.5mm - 3/8 - Peugeot 404 - truck 10/65 to 10/67

Rear right brake cylinder 28.5mm - 3/8 - Peugeot 404 - truck 10/65 to 10/67

€64.62 TTC
(53,85 € HT)

Set of 4 FRONT brake shoes 60mm larg Peugeot 404

Set of 4 relined front brake shoes, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake ...

€158.40 TTC
(132,00 € HT)

Set of 4 FRONT brake shoes 65mm larg Peugeot 404

Set of 4 relined front brake shoes, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake ...

€192.00 TTC
(160,00 € HT)

Set of 4 FRONT brake shoes 65mm larg Peugeot 404 thermostable

Set of 4 relined front brake shoes, in standard exchange. Peugeot 404 thermostable (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished ...

€216.00 TTC
(180,00 € HT)

Set of 4 rear brake shoes Peugeot 404

Set of 4 REAR brake shoes relined, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non ...

€132.00 TTC
(110,00 € HT)

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

THERMOSTABLE front brake cylinder - set of 4 - Peugeot 404

Set of 4 front brake cylinders Thermostable L or R - Peugeot 4041965 to 69

€561.60 TTC
(468,00 € HT)

Thermostable rear brake cylinder Ø 17.50 mm - Peugeot 404

Rear wheel cylinder Thermostable L or R Ø 17.50 mm - Peugeot 4041965 at the end of production

Thermostable rear brake cylinder Ø 19.00 mm - Peugeot 404

Rear wheel cylinder L or R Ø 19 mm. Liquid inlet 3/8 - French manufacturing

€55.56 TTC
(46,30 € HT)

Upper front cylinder L or R - Peugeot 404 ALL model except Thermostable

Single piston cylinder with bleeder for front wheel - Ø 28.57 mm - Peugeot 404 ALL model except Thermostable - Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front) - French manufacture - NON ...

€61.50 TTC
(51,25 € HT)