Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Front brake hose 381 mm - Peugeot 404 sedan

Flexible 381 mm front404 Sedan Oct 1965 to Oct 67404 Diesel Sedan Oct 1965 to Sep 68

Contactor: copper seal kit for LONG stop contactor 022114

Set of 2 seals for STOP LONG contactor

€3.60 TTC
(3,00 € HT)

Rear brake springs and clips kit - Peugeot 404 all models

Rear brake springs and clips kit - Peugeot 404 all models

Brake reservoir - male thread + electrical contact

Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level

Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable

Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...

€63.60 TTC
(53,00 € HT)

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Rear left brake cylinder 28.5mm - 3/8 - Peugeot 404 - truck 10/65 to 10/67

Rear left brake cylinder 28.5mm - 3/8 - Peugeot 404 - truck 10/65 to 10/67

€66.00 TTC
(55,00 € HT)

Ecrou

FRONT brake spring kit - Peugeot 404 - WITHOUT hydrovac

Brake spring kit for front wheels WITHOUT hydrovac Peugeot 404

kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem

Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.

Rear brake hose 460 mm - Peugeot 404 sedan injection coupe cab (depending on the year)

Front brake hose 460 mm long - please check the correspondence with your model before ordering.- 404 Sedan start at 02/63- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series- For other models, please ...

Male thread brake reservoir

Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible

Rear brake hose 303 mm - Peugeot 404

Flexible 303 mm front404 Heat-stable sedan oct 1965 end of series404 Coupé Cabriolet Oct 1965 end of series

Rear brake cylinder 25.4mm - 3/8 - Peugeot 404 - Diesel sedan 10/65 to 09/68

Rear brake cylinder - Peugeot 404 - Diesel sedan 10/65 to 09/68Liquid inlet 3/8 - measurement on the male connection = 9.5 mm

€51.00 TTC
(42,50 € HT)

Rear brake cylinder 25.4mm - 3/8 - Peugeot 404 - petrol berline 10/65 to 10/67

Rear brake cylinder - Ø 25.4 mm - Liquid inlet with outgoing cone - Peugeot 404 - petrol sedan 10/65 to 10/67Liquid inlet 3/8 - measurement on the male connection = 9.5 mm

€51.00 TTC
(42,50 € HT)