Rear brake cylinder 25.4mm - 3/8 - Peugeot 404 - petrol berline 10/65 to 10/67
Rear brake cylinder - Ø 25.4 mm - Liquid inlet with outgoing cone - Peugeot 404 - petrol sedan 10/65 to 10/67Liquid inlet 3/8 - measurement on the male connection = 9.5 mm
(42,50 € HT)

Set of 4 FRONT brake shoes 65mm larg Peugeot 404
Set of 4 relined front brake shoes, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake ...
(173,25 € HT)

Thermostable rear brake cylinder Ø 17.50 mm - Peugeot 404
Rear wheel cylinder Thermostable L or R Ø 17.50 mm - Peugeot 4041965 at the end of production
(20,00 € HT)
Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
(3,00 € HT)

Upper front cylinder L or R - Peugeot 404 ALL model except Thermostable
Single piston cylinder with bleeder for front wheel - Ø 28.57 mm - Peugeot 404 ALL model except Thermostable - Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front) - French manufacture - NON ...
(51,25 € HT)

Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
(16,29 € HT)
Rear brake cylinder 25.4mm - 3/8 - Peugeot 404 - Diesel sedan 10/65 to 09/68
Rear brake cylinder - Peugeot 404 - Diesel sedan 10/65 to 09/68Liquid inlet 3/8 - measurement on the male connection = 9.5 mm
(42,50 € HT)

Front brake hose 356 mm - Peugeot 404 sedan - injection coupé cabriolet according to year
Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Saloon 07/60 end of series- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series EXCEPT ...
(35,00 € HT)
Front brake hose 412 mm - Peugeot 404 sedan - debut a 07/60
Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Sedan start at 07/60- For other models, please call us
(35,00 € HT)
FRONT brake spring kit - hydrovac Peugeot 404 - oct / 64 a 67
Front wheel brake spring kit - braking with hydrovac Peugeot 404 - oct 64 to 67
(22,00 € HT)
Rear brake cylinder - 25.4mm - Peugeot 404 (click on detail)
Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16 e piston Ø 25.4 mm.Exiting cone visible at the bottom of the liquid inlet on the cylinder.404 assembly:- petrol sedan: start at 10/67- Diesel sedan: start at 09/68- Coupe convertible ...
(50,50 € HT)

Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
(35,00 € HT)
Rear brake hose 460 mm - Peugeot 404 sedan injection coupe cab (depending on the year)
Front brake hose 460 mm long - please check the correspondence with your model before ordering.- 404 Sedan start at 02/63- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series- For other models, please ...
(36,00 € HT)
Viewed products
12v to 6v regulator for temperature, pressure, fuel gauge
This module allows the use of 6V pressure gauges on a 12V vehicle (negative to ground). Mounts on a temperature gauge, pressure, fuel gauge, ...Very practical, it is fixed directly on the supply terminal of the pressure gauge thanks to a hole ...
(45,00 € HT)
Water pump repair kit - Simca Versailles Chambord
Repair kit for water pump Simca Versailles, Chambord, Marly etc.Includes a bearing axle + sealing ring ("cyclam"). It is advisable to rectify the seat on the body (glass) before fitting a new rotating joint. Refer to the technical review for ...
(148,64 € HT)
Charger and maintenance 6v / 12v Accumate
AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...
(105,00 € HT)
High hose for Simca Versailles Chambord
High hose for V8 Simca Versailles Chambord etc. (2 per engine) Sold individually. Diam 40 mm (elbow side) - Diam 35/40 mm (straight length) - Straight part length 580 mm Elbow length 130 mm. Approximate values
(54,40 € HT)
Ford Vedette large model radiator cap
Radiator cap, large model. For radiator neck approx. 66 mm Valve diameter approx. 49 mm
(41,70 € HT)
Copper gasket 11.50 x 20 for front brake hose - Peugeot 404
Copper gasket 20x11.50 mm thickness 1mm
(1,50 € HT)
