Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
€3.00 TTC
(3,00 € HT)
(3,00 € HT)
Front brake hose 412 mm - Peugeot 404 sedan - debut a 07/60
Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Sedan start at 07/60- For other models, please call us
€35.00 TTC
(35,00 € HT)
(35,00 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
€15.42 TTC
(15,42 € HT)
(15,42 € HT)
Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable
Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...
€41.98 TTC
(41,98 € HT)
(41,98 € HT)
FRONT brake spring kit - hydrovac Peugeot 404 - oct / 64 a 67
Front wheel brake spring kit - braking with hydrovac Peugeot 404 - oct 64 to 67
€20.00 TTC
(20,00 € HT)
(20,00 € HT)
THERMOSTABLE front brake cylinder - set of 4 - Peugeot 404
Set of 4 front brake cylinders Thermostable L or R - Peugeot 4041965 to 69Available from around March 15, 2021.
€408.24 TTC
(408,24 € HT)
(408,24 € HT)
Set of 48.00 mm connecting rod bearings - original STD dimension - Citroen Traction 11D - HY - U23 Mounts on engines equipped w
Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.
€158.33 TTC
(158,33 € HT)
(158,33 € HT)
Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
€32.00 TTC
(32,00 € HT)
(32,00 € HT)
Brake reservoir - male thread + electrical contact
Brake fluid reservoir, translucent plastic. With cap, mounting bracket and electrical contact for low fluid level
€38.00 TTC
(38,00 € HT)
(38,00 € HT)
Rear brake cylinder - 25.4mm - Peugeot 404 (click on detail)
Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16 e piston Ø 25.4 mm.Exiting cone visible at the bottom of the liquid inlet on the cylinder.404 assembly:- petrol sedan: start at 10/67- Diesel sedan: start at 09/68- Coupe convertible ...
€41.94 TTC
(41,94 € HT)
(41,94 € HT)
Set of 4 FRONT brake shoes Peugeot 404
Set of 4 relined front brake shoes, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake ...
€130.00 TTC
(130,00 € HT)
(130,00 € HT)
Thermostable rear brake cylinder Ø 17.50 mm - Peugeot 404
Rear wheel cylinder Thermostable L or R Ø 17.50 mm - Peugeot 4041965 at the end of production
€20.00 TTC
(20,00 € HT)
(20,00 € HT)
Rear brake springs and clips kit - Peugeot 404 all models
Rear brake springs and clips kit - Peugeot 404 all models
€32.92 TTC
(32,92 € HT)
(32,92 € HT)
- New
copy of Rear brake cylinder - Ø19 mm - Simca 1000
Rear wheel cylinder L or R Ø 19 mm
€37.50 TTC
(37,50 € HT)
(37,50 € HT)
Set of 4 rear brake shoes Peugeot 404
Set of 4 REAR brake shoes relined, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non ...
€93.33 TTC
(93,33 € HT)
(93,33 € HT)
