Rear brake cylinder - 25.4mm - Peugeot 404 (click on detail)
Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16 e piston Ø 25.4 mm.Exiting cone visible at the bottom of the liquid inlet on the cylinder.404 assembly:- petrol sedan: start at 10/67- Diesel sedan: start at 09/68- Coupe convertible ...
€60.60 TTC
(50,50 € HT)
(50,50 € HT)
Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable
Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...
€63.60 TTC
(53,00 € HT)
(53,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
€53.95 TTC
(44,96 € HT)
(44,96 € HT)
Front brake hose 356 mm - Peugeot 404 sedan - injection coupé cabriolet according to year
Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Saloon 07/60 end of series- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series EXCEPT ...
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem
Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.
€190.00 TTC
(158,33 € HT)
(158,33 € HT)
Copper gasket 11.50 x 20 for front brake hose - Peugeot 404
Copper gasket 20x11.50 mm thickness 1mm
€1.80 TTC
(1,50 € HT)
(1,50 € HT)
Set of 4 FRONT brake shoes 65mm larg Peugeot 404 thermostable
Set of 4 relined front brake shoes, in standard exchange. Peugeot 404 thermostable (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished ...
€216.00 TTC
(180,00 € HT)
(180,00 € HT)
Brake reservoir - male thread + electrical contact
Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level
€47.40 TTC
(39,50 € HT)
(39,50 € HT)
Set of 4 rear brake shoes Peugeot 404
Set of 4 REAR brake shoes relined, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non ...
€132.00 TTC
(110,00 € HT)
(110,00 € HT)
Rear brake cylinder 25.4mm - 3/8 - Peugeot 404 - Diesel sedan 10/65 to 09/68
Rear brake cylinder - Peugeot 404 - Diesel sedan 10/65 to 09/68Liquid inlet 3/8 - measurement on the male connection = 9.5 mm
€51.00 TTC
(42,50 € HT)
(42,50 € HT)
Thermostable rear brake cylinder Ø 19.00 mm - Peugeot 404
Rear wheel cylinder L or R Ø 19 mm. Liquid inlet 3/8 - French manufacturing
€55.56 TTC
(46,30 € HT)
(46,30 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
€19.55 TTC
(16,29 € HT)
(16,29 € HT)
FRONT brake spring kit - hydrovac Peugeot 404 - oct / 64 a 67
Front wheel brake spring kit - braking with hydrovac Peugeot 404 - oct 64 to 67
€22.00 TTC
(22,00 € HT)
(22,00 € HT)
Rear brake springs and clips kit - Peugeot 404 all models
Rear brake springs and clips kit - Peugeot 404 all models
€17.00 TTC
(17,00 € HT)
(17,00 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
€19.55 TTC
(16,29 € HT)
(16,29 € HT)
