- New
soufflet universel pour cardan
(24,00 € HT)
- New
soufflet tripode cote boite
(30,00 € HT)
- New
SIMCA Vedette Versailles Chambord nameplate
(8,00 € HT)
- New
Simca break Marly nameplate
(8,00 € HT)
- New
Ford Vedette nameplate
(8,00 € HT)
- New
Facel nameplate
(8,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 46 products.
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
22mm master cylinder kit Simca Versailles Chambord
Complete overhaul kit for 22 mm master cylinder.
(26,00 € HT)
3/8 - 24 f copper pipe fitting
Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm
(6,08 € HT)
Brake hose 367 mm - front or rear - Simca 1300
Front or rear brake hose length 367 mm.Male ext 9mm - female int Ø 8.3 mmMounts on:- Simca 1300 front or rear- Simca 1500 rear onlyCheck with your model before ordering.
(21,00 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake switch - STOP - 7 / 16-20f / p
Brake switch. STOP light function - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8.Generally mounted after April 1960.Thread 7/16 - 20 thread / inch
(22,50 € HT)
Brake switch - STOP - silicone fluid - 7 / 16-20 th / inch
Brake switch for silicone fluid. STOP light function - Simca Aronde (depending on year) and P60Thread 7/16 - 20 thread / inch
(22,50 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,20 € HT)
Flexible rear brake hose 349 mm Simca Versailles Chambord Ariane
Flexible rear brake hose 349 mm long. Male ext 9mm - female int Ø 8.3 mm. Don't forget to replace the copper gasket: click here a> (The vehicle has only 1 rear flexible) - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and ...
(26,00 € HT)
Front brake cylinder D Ø 28.5 mm - with bleeder Simca Ariane
Brake cylinder for front right wheel, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until September 1965Diameter 28.57 mm - Liquid inlet 3/8
(54,70 € HT)
Front brake cylinder L Ø 28.5 mm - with bleeder - Simca Ariane
Brake cylinder for left front wheel, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until September 1965Diameter 28.57 mm - Liquid inlet 3/8
(54,70 € HT)
Front brake cylinder rebuild kit Ø 28.5 mm - Ford Vendome - Simca Chambord
Necessary repair for 1 front wheel cylinder.
(20,35 € HT)
Front brake cylinder Ø 28.5 mm - set of 4 - Simca Ariane
Set of 4 front brake cylinders. - Simca Ariane 4 and Ariane 8 - Simca 1300 until September 1965Includes: one cylinder with left bleeder, one with right bleed and two cylinders without bleed.Liquid entry 3/8Diameter 28.57 mm
(210,25 € HT)
Front brake cylinder Ø 28.5 mm - without bleeder (L and R) - Simca Ariane
Front wheel brake cylinder, without bleeder. Right or Left mounting. Diameter 28.57 mmr - Simca Ariane 4 and Ariane 8 - Simca 1300 until sept. 1965.
(50,50 € HT)
Front brake hose 349 mm Simca Versailles Chambord Ariane
Front brake hose 349 mm long. (The vehicle has 2 front hoses) For Simca V8, Versailles, Regence, Chambord, Présidence, Trianon, Marly, Ariane 4 and Ariane 8, etc.
(26,00 € HT)
Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
(33,80 € HT)
Master cylinder 22mm Simca Chambord 04/1960 to end
" Complete master cylinder D 22 mm. Outlet in 7/16 20f / p - Delivered complete with adapter and vertical outlet (as the photo) For Simca V8 (Beaulieu Chambord, Présidence, Marly, Ariane 4 and Ariane 8, etc.) from April 1960 until the end of ...
(85,30 € HT)
Master cylinder 22mm Simca Versailles Chambord
Complete master cylinder D 22 mm. For Simca V8 (Versailles, Chambord, Marly, Ariane 4 and Ariane 8 etc.) before April 1960. Output 1/2 20f / p
(73,84 € HT)
Master cylinder outlet connection with banjo
MASTER CYLINDER OUTLET CONNECTION WITH BANJOBolt M1 / 2 * 20F-F7 / 16 * 20FBanjo D15 F3 / 8 * 24F 84 °
(33,54 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(8,85 € HT)
Rear brake cylinder L Ø 23.81 mm - incoming cone - Simca Ariane
Rear wheel cylinder. Left or Right Mount - Simca Ariane 4 and Ariane 8.Diameter: 23.81 mm - Version with cone entering the bottom of the thread at the liquid inlet. See detail photo.Please note that there is also a diameter of 18 or 19 mm.
(51,25 € HT)
Rear brake cylinder rebuild kit 19mm - Simca Chambord
" Complete overhaul kit for a rear wheel cylinder. Diameter: 23.81 mm "
(20,00 € HT)
Rear brake cylinder Ø 23.81 mm - cone protruding - Simca Ariane
Rear wheel cylinder. Left or Right Mount - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8.Diameter: 23.81 mm. Version with cone protruding from the bottom of the thread at the liquid inlet. Also available as an incoming cone. See ...
(52,00 € HT)
Rear brake cylinder Ø 23.81 mm - protruding cone - Simca 1300 1301 1501
Rear wheel cylinder. Left or Right Mount - Simca 1300 1301 1501Diameter: 23.81 mm - Version with cone exiting at the bottom of the tapping of the liquid inlet. Entry 3/8 24f
(63,70 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Set of 4 relined front brake shoes Simca 1300
Set of 4 relined brake shoes (AV) for Simca 1300 in standard exchange. Bead blasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets that can damage drums.Shipping upon receipt of worn parts.
(106,00 € HT)
Set of 4 relined front brake shoes Simca Ariane
Set of 4 relined brake shoes (Front) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt ...
(93,33 € HT)
Set of 4 relined rear brake shoes Simca Ariane
Set of 4 relined brake shoes (Ar) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of ...
(114,00 € HT)
Set of 4 relined rear jaws Simca 1300
Set of 4 relined brake shoes (AR) for Simca 1300 in standard exchange. Bead blasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets that can damage drums.Shipping upon receipt of worn parts.
(106,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)