
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,30 € HT)
Rear brake cylinder L Ø 23.81 mm - incoming cone - Simca Ariane
Rear wheel cylinder. Left or Right Mount - Simca Ariane 4 and Ariane 8.Diameter: 23.81 mm - Version with cone entering the bottom of the thread at the liquid inlet. See detail photo.Please note that there is also a diameter of 18 or 19 mm.
(51,25 € HT)

Set of 4 relined front brake shoes Simca 1300
Set of 4 relined brake shoes (AV) for Simca 1300 in standard exchange. Bead blasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets that can damage drums.Shipping upon receipt of worn parts.
(106,00 € HT)

Male thread brake reservoir
Brake fluid reservoir. Supplied with bracket, plug and 3/4 male connector 16 threads / p. External thread diameter = 18.5 mm. Delivered without caliper (fixing by the thread on the master cylinder). Lockeed and silicone compatible
(35,00 € HT)
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
Rear brake cylinder rebuild kit 19mm - Simca Chambord
" Complete overhaul kit for a rear wheel cylinder. Diameter: 23.81 mm "
(20,00 € HT)

Front brake cylinder rebuild kit Ø 28.5 mm - Ford Vendome - Simca Chambord
Necessary repair for 1 front wheel cylinder.
(20,35 € HT)

Front brake cylinder Ø 28.5 mm - set of 4 - Simca Ariane
Set of 4 front brake cylinders. - Simca Ariane 4 and Ariane 8 - Simca 1300 until September 1965Includes: one cylinder with left bleeder, one with right bleed and two cylinders without bleed.Liquid entry 3/8Diameter 28.57 mm
(216,00 € HT)

Brake switch - STOP - 7 / 16-20f / p
Brake switch. STOP light function - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8.Generally mounted after April 1960.Thread 7/16 - 20 thread / inch
(23,15 € HT)
Front brake cylinder L Ø 28.5 mm - with bleeder - Simca Ariane
Brake cylinder for left front wheel, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until September 1965Diameter 28.57 mm - Liquid inlet 3/8
(56,00 € HT)

Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Master cylinder 22mm Simca Versailles Chambord
Complete master cylinder D 22 mm. For Simca V8 (Versailles, Chambord, Marly, Ariane 4 and Ariane 8 etc.) before April 1960. Output 1/2 20f / p
(76,00 € HT)

Master cylinder 22mm Simca Chambord 04/1960 to end
" Complete master cylinder D 22 mm. Outlet in 7/16 20f / p - Delivered complete with adapter and vertical outlet (as the photo) For Simca V8 (Beaulieu Chambord, Présidence, Marly, Ariane 4 and Ariane 8, etc.) from April 1960 until the end of ...
(88,00 € HT)
