- New
copy of Segment set Ø 67.50 mm Simca Chambord 2 x 2 x 5 - 8cyl
Segment set Ø 67.50 mm Simca 2 x2 x 5 - 8cyl
(167,00 € HT)
- New
- New
Courroie largeur 10 mm moteur 817 - Saviem SG2
(19,80 € HT)
- New
Jauge Peduzzi
(83,00 € HT)
- New
Kit joints adpatable avec joint de cadre pour toit ouvrant - Peugeot 203
(146,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(180,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(137,00 € HT)
- New
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(91,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 45 products.
7/16 banjo fitting + 7/16 hollow screw + seals
7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm
(27,95 € HT)
Adapter connection 1/2 UNF female - 3/8 UNF male
Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads
(9,90 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(29,00 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
(9,96 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
(15,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(16,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,00 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
(29,50 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
(66,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(128,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(155,00 € HT)
Brake pipe - from 300 to 350 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(180,00 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
(42,00 € HT)
Complete master cylinder Simca 8 1200 and sport
Master cylinder complete with bellows. Internal diameter 25.4 mm
(108,00 € HT)
Front brake cylinder 28.5mm - Simca 8 - 1200 - Sport
Front brake cylinder. Diam 28.5 mm. Fitting on Simca 8 1200 cm3 and Sport. entry 7 / 16th
(53,00 € HT)
Front or rear brake hose - 470 mm - Simca 8
Front or rear brake hose - length 470 mm. Simca 8
(25,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(8,85 € HT)
Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.
Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir
(5,15 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle
Adaptateur freinage 1/2-20 UNF mâle par 3/8 24 filets femelle
(10,50 € HT)
Rear brake cylinder 25.4mm - Simca 8 - 1200 - Sport
Rear brake cylinder. Diam. 25.4 mm. Mounting on Simca 8- piston diameter: 25.4 mm- Body length: 68 mm- fixing screw centers: 36mm- diameter of the passage hole in the wheel flange: 36 mm- cylinder piston hollowed out (sphere or cone?) to ...
(45,80 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Set of 4 relined front brake shoes Simca 8 brake
Set of 4 relined brake shoes (front) for Simca 8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
(93,33 € HT)
Set of 4 relined rear brake shoes Simca 8 brake
Set of 4 relined brake shoes (AR) for Simca 8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
(93,33 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)