Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
€54.84 TTC
(45,70 € HT)
(45,70 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
€20.40 TTC
(17,00 € HT)
(17,00 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
€13.80 TTC
(11,50 € HT)
(11,50 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
€38.64 TTC
(32,20 € HT)
(32,20 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
€38.40 TTC
(32,00 € HT)
(32,00 € HT)
Front or rear brake hose - 470 mm - Simca 8
Front or rear brake hose - length 470 mm. Simca 8
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
€11.40 TTC
(9,50 € HT)
(9,50 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
€69.24 TTC
(57,70 € HT)
(57,70 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
€5.40 TTC
(4,50 € HT)
(4,50 € HT)
Inclined banjo + hollow screw + 2 joints for connection on Simca 6 cylinder
Inclined banjo with 17mm inlet (11 / 16th) + 7 / 16th hollow screw + 2 seals for Simca 6 cylinder liquid inlet connection
€33.36 TTC
(27,80 € HT)
(27,80 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
€62.04 TTC
(51,70 € HT)
(51,70 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
€22.80 TTC
(19,00 € HT)
(19,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
€19.56 TTC
(16,30 € HT)
(16,30 € HT)
Adapter 3/4 16 M by 1/2 20 F for Renault Colorale Prairie master cylinder
Adapter for master cylinder with 18 mm inlet (3/4 - 16 thread) Renault Colorale, Goélette and derivatives.Mounts on the liquid inlet (coming from the tank) and allows the supply tube to be connected to the VERTICAL. The tube must be fitted with a ...
€24.96 TTC
(20,80 € HT)
(20,80 € HT)
Viewed products
Renault Fregate rear brake shoe set 4
Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.Width 52 x 267 and 280 mm
€135.00 TTC
(112,50 € HT)
(112,50 € HT)
