- New
Ignition - Set of 4 spark plug springs - 203-403-404 - 165mm
Set of 4 spark plug springs - 203-403-404 - 165mm
(19,88 € HT)
- New
Kit 2 x sole rear lights - Ford Vendome
Sole kit for Ford VENDOME. Made in France by Techni-Tacot.Including: 2 x bases for rear lights (above the stainless steel trim).Soles for the lower part (stainless steel trim) on sale here
(40,60 € HT)
- New
joint culasse peugeot 301 - moteur 2 paliers
(160,00 € HT)
- New
joint culasse peugeot 301 - moteur 3 paliers
(160,00 € HT)
- New
MISTRAL engine nameplate
(10,80 € HT)
- New
SIMCA Vedette Ariane nameplate
(10,80 € HT)
- New
SIMCA Vedette Versailles Chambord nameplate
(10,80 € HT)
- New
Clutch disc 188mm - Simca 8 - 9 Aronde P60 Standard Exchange
Clutch disc reconditioned, in standard exchange. Complete disassembly, micro-blasting and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(110,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Cooling There are 33 products.
Bronze ring - bush 15x19x30 for Citroen Traction HY U23 water pump
Bronze ring - bush 15x19x30 for Citroen Traction HY U23 water pump
(8,25 € HT)
Cap for heating flow diameter 8 mm
Rubber stopper for starting on water pump - 8 mm
(2,08 € HT)
Cap for heating outlet ø 16 mm
Rubber plug for heating outlet on water pump or radiator. Delivered in ø 16mm by default (also available in 14 or 18 mm, just specify when ordering)
(4,00 € HT)
Citroen HY lower hose WITHOUT heating after 07/63
Lower hose without heating flow after 07/1963
(32,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
(10,00 € HT)
Gasket for radiator cap - Citroen HY before 1964 - Traction
Gasket for radiator cap - Citroen HY before 1964 - TractionØ 60 mm exterior - 39 mm interior - th. 2mm
(3,00 € HT)
Heating departure 16 mm for hose
Departure to equip a standard hose in the model with departure for heating.Diam. 16 mm
(23,50 € HT)
Heating valve controlled by cable Ø 16 mm
Heating valve controlled by cable Ø 16 mm. Synthetic material (no corrosion problem)Length connection end to other: 91.5 mm
(49,00 € HT)
Heating valve with lever Ø 11,8 mm
Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm
(20,83 € HT)
Heating valve with lever Ø 16 mm
Heating valve with lever Ø 16 mm. Synthetic material (no corrosion problem). Length connection end to other: 113.5 mm
(26,70 € HT)
Lower hose WITH heating Citroen HY after 07/63
Lower hose with heating flow after 07/1963
(34,00 € HT)
New water pump + seal - Citroen HY from 07/63 to the end
New water pump delivered with seal - Citroen HY from 07/63 to end
(291,67 € HT)
Radiator cap + seal - Citroen HY before 1964 - Traction
Radiator cap + gasket - Citroen HY avant 63 - TractionØ 58 mm inside
(40,60 € HT)
- New
Rubber on heating adjustment button - HY - ID 19 - DS (except pallas)
Rubber on heating adjustment button - HY DS (except pallas)
(7,50 € HT)
Stainless steel cylinder head tube Citroen Traction - HY - U23
Water tube for cooling cast iron cylinder head. Citroen Traction, HY, U23 and derivativesStainless steel construction
(21,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Water pump - Spare shaft 15x158 mm - Citroen HY from 63 to end
Shaft for water pump 15 x 158mm - CItroen HY from 63 to end
(43,75 € HT)
Water pump - the seal - Citroën Traction
Gasket for water pump - Impeller Ø 80mm - Citroen Traction
(10,00 € HT)
Water pump -Citroen HY before 1964
Water pump - Citroen HY with Traction engine - before 1964. Length of the cast iron body 120 mm excluding the axis protrusionIn standard exchange - The pump must be complete and not destroyed.
(310,00 € HT)
Water pump belt - Citroen Traction - U23 - HY before 04/63
Main belt connecting the water pumps-crankshaft-fan: for Citroen with "Traction" type engine
(25,00 € HT)
Water pump overhaul kit with turbine - Citroen HY
Water pump overhaul kit with turbine - Citroen HY
(82,00 € HT)
Waterproof bearing 15 x 42 for Citroen Traction HY U23 water pump
Sealed bearing 15x42 for Citroen Traction HY U23 water pump
(8,92 € HT)
Waterproof swivel joint - Cyclam for Citroen Traction HY U23 water pump
Waterproof rotating joint - Cyclam for CItroen Traction HY U23 water pump - for Ø 15 mm shaftAttention, check the possibility of mounting for an old pump fitted with a stuffing box
(22,30 € HT)
Ø 16 mm purge te for heating or cooling circuit
Ø 16 mm purge te for heating or cooling circuit
(17,50 € HT)