racord adapt prairie 1/2 - 17 F occasion
(45,00 € HT)
copy of various port
(25,00 € HT)
Steering relay - Ford vedette - Vendôme - Comet
Steering relay attached to the passenger side chassis. Remember to replace the tie rod with the 2 rotation nuts to remove wear clearances.
(236,00 € HT)
Steering tie rod with 2 tie nuts - Ford Vedette - Vendôme - Comète
Steering rod connecting the relay on the chassis to the steering box's output rod. Supplied with two connecting nuts.Don't forget to replace the relay on the chassis (passenger side).
(300,00 € HT)
Simca 5 Segment Set - 53 mm 2x2x3x3
Set of 16 piston rings (4 per piston).Composition:Cylinder bore: 53.00 mm8 sealed piston rings, 2 mm high8 oil scraper rings, 3 mm highOther sizes available, please contact us.
(125,00 € HT)
Electronic regulator for 6V negative ground dynamo
Electronic regulator for 6V negative ground dynamo - Original appearance in ED3 housing.For dynamos with positive excitation.Charge stabilization at 7.4V. Brighter lighting, better battery charge quality, improved ignition voltage.(Exchange standard)
(208,00 € HT)

Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,50 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,50 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(87,00 € HT)

Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Cooling There are 16 products.
Cap for heating flow diameter 8 mm
Rubber stopper for starting on water pump - 8 mm
(2,08 € HT)
Cap for heating outlet ø 16 mm
Rubber plug for heating outlet on water pump or radiator. Delivered in ø 16mm by default (also available in 14 or 18 mm, just specify when ordering)
(4,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
(10,00 € HT)
Ford Vedette large model radiator cap
Radiator cap, large model. For radiator neck approx. 66 mm Valve diameter approx. 49 mm
(35,30 € HT)
Ford Vedette Simca V8 Calorstat Thermostat
" Thermostat for cooling circuit. For V8 Vedette Ford and Simca Versailles, Chambord, Vendôme, Monte Carlo etc. (Two thermostats per V8 engine). Sold individually. "
(20,00 € HT)
Heating departure 16 mm for hose
Departure to equip a standard hose in the model with departure for heating.Diam. 16 mm
(23,50 € HT)
Heating valve controlled by cable Ø 16 mm
Heating valve controlled by cable Ø 16 mm. Synthetic material (no corrosion problem)Length connection end to other: 91.5 mm
(49,00 € HT)
Heating valve with lever Ø 11,8 mm
Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm
(20,83 € HT)
Heating valve with lever Ø 16 mm
Heating valve with lever Ø 16 mm. Synthetic material (no corrosion problem). Length connection end to other: 113.5 mm
(26,70 € HT)
Radiator cap small model Ford Vedette Simca
Radiator cap, small model. For radiator neck approx. 56 mm Valve diameter approx. 39 mm
(27,88 € HT)
Stainless heating steel T hose for Ford Vedette
Stainless steel T allowing the heating return to be connected to the lower main radiator hose. Ford Vedette, Vendôme or other vehicle using this system.
(30,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Temperature manometer with probe - ivory background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Ø 16 mm purge te for heating or cooling circuit
Ø 16 mm purge te for heating or cooling circuit
(17,50 € HT)