- New
Pivots 22mm avec bagues
(150,00 € HT)
- New
joint inter collecteur ech/adm - 15-6
(12,40 € HT)
- New
kit pompe à eau 15-6
(262,50 € HT)
- New
copy of Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
(9,00 € HT)
- New
6 écrous pour collecteur ECH 15-6
(39,75 € HT)
- New
collecteur 15-6 neuf
(723,00 € HT)
- New
renov
(400,00 € HT)
- New
Brake master cylinder Ø 31.75 mm - Renault SAVIEM TP3
Brake master cylinder Ø 31.75 mm - External diamter 42 mm
(98,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,50 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(76,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,50 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Braking There are 42 products.
Adapter 3/4 16 M by 1/2 20 F for Renault Colorale Prairie master cylinder
Adapter for master cylinder with 18 mm inlet (3/4 - 16 thread) Renault Colorale, Goélette and derivatives.Mounts on the liquid inlet (coming from the tank) and allows the supply tube to be connected to the VERTICAL. The tube must be fitted with a ...
(20,80 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Adapter connection 7/16 male - 11/16 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle
(32,20 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(19,00 € HT)
Adapter connection 7/16 UNF female - 1/2 UNF male
Adapter connection 1/2 UNF male - 7/16 UNF female
(10,05 € HT)
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone
(15,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
(17,00 € HT)
Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,30 € HT)
Brake cylindre - front - 31.75 mm - Peugeot D4A D4B
Cylindre avant 31.75 mm - Peugeot D4A D4B Retirer le purgeur pour le cylindre qui reçoit le liquide et le renvoie au second cylindre. (4 cylindres pour un véhicule) Vendu à l'unité
(102,18 € HT)
Brake master cylinder - Ø 28.5 mm Peugeot D4 - 11/57 to end
Brake master cylinder Ø 28.5mm, Peugeot D4 D4A D4B - 11/57 to end. Non contractual photo.
(95,00 € HT)
Brake master cylinder Ø 31.75 mm - Peugeot D3
Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot D3
(120,00 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(40,00 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(32,00 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
(16,29 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
(16,29 € HT)
Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
(3,00 € HT)
Ecrou
(4,80 € HT)
Front brake cylinder 31.75 mm Peugeot D3 - Q3A
Front brake cylinder - Ø 31.75 mm - Peugeot D3 D3A D3B
(44,00 € HT)
Front brake hose - 470mm - Peugeot D3
Front brake hose Peugeot D3 D3A D3B etc. Length 470 mm. tip Ø 17 mm approximately
(25,00 € HT)
Front brake hose 493 mm Peugeot D4 - 11/57 to end
Front brake hose length 493 mm for Peugeot D4 D4A D4B - please check the correspondence with your model before ordering.For other models, please call us
(35,00 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
(9,00 € HT)
Rear brake cylinder -22 mm - cone protruding - Peugeot D4 - 11/57 a 04/64
Rear brake cylinder -22 mm - protruding cone - Peugeot D4 - 11/57 to 04/64 - French manufacture.
(59,00 € HT)
Rear brake cylinder -25.4 mm - cone protruding - Peugeot D4 - 04/64 to 05/65
Rear wheel cylinder d 25.4mm, Peugeot D4 D4A D4B - 04/64 to 05/65.Model with cone coming out of the liquid inlet well. Non contractual photo.
(50,50 € HT)
Rear brake cylinder -25.4 mm - incoming cone - Peugeot D3A ET D4 - 04/64 a 05/65
Rear wheel cylinder d 25.4mm, Peugeot D3A - D4 D4A D4B - 04/64 to 05/65.Model with cone entering the liquid inlet well. Non contractual photo.
(43,25 € HT)
Rear brake hose - 254mm - Peugeot D3
Rear brake hose Peugeot D3 D3A D3B etc. Length 254 mm. tip Ø 17 mm approximately
(25,00 € HT)
Rear brake hose 305 mm - Peugeot D4
Rear brake hose 305 mm long. Input 7/16 16 f / p for Peugeot D4. Diam extérieur : 15.6 mm Diam intérieur : 10mm
(36,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,50 € HT)
Set of 4 relined front brake shoes for Peugeot D3 D4
Set of 4 front brake shoes width 57 mm relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...
(130,00 € HT)
Set of 4 relined rear brake shoes for Peugeot D3 D4
Set of 4 rear brake shoes, 46 mm wide. relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...
(130,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)