Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
€11.40 TTC
(9,50 € HT)
(9,50 € HT)
Metal insert tip for jar
Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.
€10.80 TTC
(9,00 € HT)
(9,00 € HT)
Front brake hose - 470mm - Peugeot D3
Front brake hose Peugeot D3 D3A D3B etc. Length 470 mm. tip Ø 17 mm approximately
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Rear brake hose - 254mm - Peugeot D3
Rear brake hose Peugeot D3 D3A D3B etc. Length 254 mm. tip Ø 17 mm approximately
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Contactor: copper seal kit for LONG stop contactor 022114
Set of 2 seals for STOP LONG contactor
€3.60 TTC
(3,00 € HT)
(3,00 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
€19.55 TTC
(16,29 € HT)
(16,29 € HT)
Front brake cylinder 31.75 mm Peugeot D3 - Q3A
Front brake cylinder - Ø 31.75 mm - Peugeot D3 D3A D3B
€52.80 TTC
(44,00 € HT)
(44,00 € HT)
Rear brake cylinder -22 mm - cone protruding - Peugeot D4 - 11/57 a 04/64
Rear brake cylinder -22 mm - protruding cone - Peugeot D4 - 11/57 to 04/64 - French manufacture.
€70.80 TTC
(59,00 € HT)
(59,00 € HT)
Set of 4 relined front brake shoes for Peugeot D3 D4
Set of 4 front brake shoes width 57 mm relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...
€156.00 TTC
(130,00 € HT)
(130,00 € HT)
Viewed products
Circle Steering Wheel for Ford Vedette
Circle Steering Wheel for Ford Vedette,
€640.00 TTC
(640,00 € HT)
(640,00 € HT)
Pistons liners kit Ø 54.50 base 60 Renault 680.01 and -02 - 747 CM3 4CV
Pistons liners kit Ø54.50 base 60 Renault 680.01 and -02 - 747 CM3 4CV
€330.00 TTC
(275,00 € HT)
(275,00 € HT)
Seals for deflector x2 Simca Chambord
Set of 2 deflector gaskets for SImca Beaulieu Chambord Presidence Marly 2. Cannot be mounted on Ariane, Versailles, Trianon, Marly 1.Refabrication of original quality
€384.00 TTC
(384,00 € HT)
(384,00 € HT)
Heating valve with lever Ø 11,8 mm
Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm
€25.00 TTC
(20,83 € HT)
(20,83 € HT)
Front brake hose 349 mm Simca Versailles Chambord Ariane
Front brake hose 349 mm long. (The vehicle has 2 front hoses) Ø 3/8 For Simca V8, Versailles, Regence, Chambord, Présidence, Trianon, Marly, Ariane 4 and Ariane 8, etc.
€32.40 TTC
(27,00 € HT)
(27,00 € HT)
Banjo adapter for SUMB Marmon master cylinder
Adapter for connecting the inlet of an 18 mm master cylinder to the original tube that goes to the jar. When the old models are in diam. 22mm, the adapter is essential to connect the tube from the jar.The set consists of: 2 copper gaskets, a ...
€50.40 TTC
(42,00 € HT)
(42,00 € HT)
