Rear brake hose - 254mm - Peugeot D3
Rear brake hose Peugeot D3 D3A D3B etc. Length 254 mm. tip Ø 17 mm approximately
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
€53.95 TTC
(44,96 € HT)
(44,96 € HT)
Front brake hose - 470mm - Peugeot D3
Front brake hose Peugeot D3 D3A D3B etc. Length 470 mm. tip Ø 17 mm approximately
€30.00 TTC
(25,00 € HT)
(25,00 € HT)
Rear brake hose 305 mm - Peugeot D4
Rear brake hose 305 mm long. Input 7/16 16 f / p for Peugeot D4. Diam extérieur : 15.6 mm Diam intérieur : 10mm
€43.20 TTC
(36,00 € HT)
(36,00 € HT)
Adapter fitting 3/8 UNF Male - 10x100 female
Adapter fitting 3/8 UNF Male - 10x100 female
€21.00 TTC
(17,50 € HT)
(17,50 € HT)
Brake master cylinder - Ø 28.5 mm Peugeot D4 - 11/57 to end
Brake master cylinder Ø 28.5mm, Peugeot D4 D4A D4B - 11/57 to end. Non contractual photo.
€114.00 TTC
(95,00 € HT)
(95,00 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
€19.55 TTC
(16,29 € HT)
(16,29 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
€38.40 TTC
(32,00 € HT)
(32,00 € HT)
Rear brake cylinder -25.4 mm - incoming cone - Peugeot D3A ET D4 - 04/64 a 05/65
Rear wheel cylinder d 25.4mm, Peugeot D3A - D4 D4A D4B - 04/64 to 05/65.Model with cone entering the liquid inlet well. Non contractual photo.
€52.20 TTC
(43,50 € HT)
(43,50 € HT)
Viewed products
Seals of the 2 rear doors - Peugeot D3 D4
Seals of the 2 rear doors - Peugeot D3 D4.Product sold in one length. To be cut according to the length of each door.
€117.60 TTC
(98,00 € HT)
(98,00 € HT)
copy of Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
€297.60 TTC
(248,00 € HT)
(248,00 € HT)
Pressure hose for igniter Ø 5.5 mm - by the meter
Hose to connect the igniter / carburetor depression 5.5 mm sold by the meter.
€10.20 TTC
(8,50 € HT)
(8,50 € HT)
Front brake hose 493 mm Peugeot D4 - 11/57 to end
Front brake hose length 493 mm for Peugeot D4 D4A D4B - please check the correspondence with your model before ordering.For other models, please call us
€42.00 TTC
(35,00 € HT)
(35,00 € HT)
Rear brake cylinder -22 mm - cone protruding - Peugeot D4 - 11/57 a 04/64
Rear brake cylinder -22 mm - protruding cone - Peugeot D4 - 11/57 to 04/64 - French manufacture.
€70.80 TTC
(59,00 € HT)
(59,00 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
€27.00 TTC
(22,50 € HT)
(22,50 € HT)
50 mm galvanized flange or collar exhaust - Simca Versailles Chambord
Flange for exhaust connection (clamp with caliper)
€9.00 TTC
(7,50 € HT)
(7,50 € HT)
Renault timing cover gasket 668 and 671
" Timing cover gasket for Renault type 668 and 671 engines (Colorale, Goélette, R2087, Frégate, etc) "
€14.40 TTC
(12,00 € HT)
(12,00 € HT)
