1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

3/8 - 24 f copper pipe fitting

Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm

7/16 banjo fitting + 7/16 hollow screw + seals

7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube

Adapter connection 1/2 UNF female - 3/8 UNF male

Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads

Adapter connection 7/16 male - 1/2 female

Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle

Adapter connection 7/16 male - 11/16 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle

Adapter connection 7/16 male - 3/8 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 3/8

Adapter connection 7/16 UNF female - 1/2 UNF male

Adapter connection 1/2 UNF male - 7/16 UNF female

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Bague cuivre pour mâchoire Citroen

Belt 17x969 mm

Belt :Width: 17mmExternal length: 969 mmInternal length: 900 mm

Brake cylinder - Front - 31.75 mm - Peugeot J7

Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A

Brake cylinder 28.5mm - entry 11mm (7/16th) -

€78.00 TTC
(65,00 € HT)

Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck

Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck

€78.00 TTC
(65,00 € HT)

brake hose B3P5 300 mm

brake hose P5P5 380 mm - hydrovac 404

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Brake line - from 100 to 150 cm

" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "

Brake line - from 150 to 200 cm

Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake line - from 51 to 99 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€142.80 TTC
(119,00 € HT)

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake pipe - from 300 to 350 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake reservoir with nipple + contact

Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level

Brake reservoir with rubber

Translucent tank, delivered with bracket; rubber plug and fitting.

Brake switch - STOP - spring-loaded

Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.

brass banjo + hollow screw Vedette 1949

Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m

Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 17

Copper gasket 13.1 x 17 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

copy of 3-way 3/8 24 f connector

3-way 3/8 connection 24 threads - generally at the outlet of the master cylinder

copy of Inclined banjo + hollow screw + 2 joints for connection on Simca 6 cylinder

Inclined banjo with 17mm inlet (11 / 16th) + 7 / 16th hollow screw + 2 seals for Simca 6 cylinder liquid inlet connection

€33.60 TTC
(28,00 € HT)

copy of Inclined banjo + hollow screw + 2 joints for connection on Simca 6 cylinder

Inclined banjo with 17mm inlet (11 / 16th) + 7 / 16th hollow screw + 2 seals for Simca 6 cylinder liquid inlet connection

€33.60 TTC
(28,00 € HT)

Custom brake hose D13+7/16e male Long 320mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.

Custom brake hose D13+7/16e male Long 380mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Image not contractual.

Cylinder - front or rear copper seals kit for one wheel - VLR Delahaye

Set of 2 seals for hollow screw and banjo (for 1 cylinder)

€3.72 TTC
(3,10 € HT)

Cylindre frein 25.4 mm - entrée 11mm cone entrant (7/16e) - SAMBRON transporteur à benne

Cylindre frein  25.4 mm - entrée 11mm (7/16e) cône entrant -SAMBRON transporteur à benne Pour permettre le raccordement sur une canalisation avec un embout conique femelle, ajouter pour chaque cylindre : 1 x adaptateur avec cône sortant: 1 x ...

Divers

Produit divers

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Double circuit master cylinder Saviem Sg3 and derivatives

Double circuit master cylinder Saviem Sg3 and derivatives

€570.00 TTC
(475,00 € HT)

Ecrou

FLEXIBLE 17MM - 3/8 24F - LONG 320

flexible sur mesure type S14 S14 – 500mm

frais nettoyage + ré-emballage suite produit monté ou sachet ouvert

Front brake cylinder 31.75 mm - SAMBRON

Front brake cylinder - Ø 31.75 mm - Sambron

€83.40 TTC
(69,50 € HT)

Front brake cylinder rebuild kit 31.75 mm - VLR DELAHAYE

Front wheel cylinder repair kit, with pistons and spring. (For one wheel)Diam 31.75 mm

€27.00 TTC
(22,50 € HT)

Front cylinder - VLR DELAHAYE

" Front brake cylinder. D 1" "1/4 (31.75 mm). Fits vehicles from July 54 but can be fitted on ALL models. Advantageously replaces cylinders in 1'1 / 8 (before 06 / 1954). More efficient braking. Sold individually (1 cylinder per wheel). Entry ...

€50.58 TTC
(42,15 € HT)

Hollow screw set 12x100 + banjo 3/8 + 2 seals + contac stop + drilling modification

Set of 10 hollow screw set 12x100 + 3/8 banjo + 2 gaskets + stop switch + drilling modification

Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4

Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...

€12.60 TTC
(10,50 € HT)

Intervention main d'oeuvre - adaptation - nettoyage

kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem

Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.

LEFT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

LEFT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

€60.42 TTC
(50,35 € HT)

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Master cylinder 25.4 mm - VLR DELAHAYE

" Complete master cylinder for Peugeot 203 Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "

€62.40 TTC
(52,00 € HT)

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

modification cylindre avec piston alu creux 14mm

Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.

Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir

Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm

Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)

Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle

Adaptateur freinage  1/2-20 UNF mâle par 3/8 24 filets femelle  

Rear brake cylinder - VLR DELAHAYE

" Rear brake cylinder. D 1" "(25.4 mm). Mounts on all models. Sold individually (1 cylinder per wheel) "

€50.40 TTC
(42,00 € HT)

Rear brake cylinder rebuild kit 25.4 mm - VLR DELAHAYE

Repair kit for 1 rear wheel cylinder 25.4 mm. Supplied with pistons and spring.For all models.

€26.22 TTC
(21,85 € HT)

Remise en état lot de pièces spécifiques

RIGHT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

RIGHT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

€60.42 TTC
(50,35 € HT)

Rouleau étanchéité

Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

Set of 4 front brake shoes Mercedes 190 SL

Set of 4 front brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro blunt brake shoes.(Non contractual photo)

€180.00 TTC
(150,00 € HT)

Set of 4 rear brake shoes Mercedes 190 SL

Set of 4 rear brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro billed and varnished brake shoes.(Non contractual photo)

€180.00 TTC
(150,00 € HT)

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Tailor-made brake hose D13+7/16e male Long 400mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.

travaux divers

used fitting line star

various works