Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

Rear brake cylinder rebuild kit 25.4 mm - VLR DELAHAYE

Repair kit for 1 rear wheel cylinder 25.4 mm. Supplied with pistons and spring.For all models.

€26.22 TTC
(21,85 € HT)

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

frais nettoyage + ré-emballage suite produit monté ou sachet ouvert

Maitre cylindre SAMBRON type sed

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€144.00 TTC
(120,00 € HT)

Cylindre frein 25.4 mm - entrée 11mm cone entrant (7/16e) - SAMBRON transporteur à benne

Cylindre frein  25.4 mm - entrée 11mm (7/16e) cône entrant -SAMBRON transporteur à benne Pour permettre le raccordement sur une canalisation avec un embout conique femelle, ajouter pour chaque cylindre : 1 x adaptateur avec cône sortant: 1 x ...

primary brake cable 230x82 cm with eyelet

total length 230 cm - sheath 82 cm - with starting eye

Brake switch - STOP - spring-loaded

Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.

brake hose P5P5 380 mm - hydrovac 404

Front brake cylinder 1"1/4 - 31.75 mm - 7/16 - SAMBRON

Piston diameter: 31.7 Housing length: 68 mm Distance between mounting holes: 36 mm Hydraulic inlet thread: 7/16UNF

€53.40 TTC
(44,50 € HT)

Copper gasket 13.1 x 17

Copper gasket 13.1 x 17 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A

Brake cylinder 28.5mm - entry 11mm (7/16th) -

€79.20 TTC
(66,00 € HT)

Canalisation Ø 6.35 mm bocal vers maitre cylindre - 0.5m - avec 2 raccords 1/2 mâle

Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...