Double circuit master cylinder Saviem Sg3 and derivatives

Double circuit master cylinder Saviem Sg3 and derivatives

€644.40 TTC
(537,00 € HT)

Brake line - from 150 to 200 cm

Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.

RIGHT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

RIGHT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

€61.20 TTC
(51,00 € HT)

Front brake cylinder rebuild kit 31.75 mm - VLR DELAHAYE

Front wheel cylinder repair kit, with pistons and spring. (For one wheel)Diam 31.75 mm

€27.00 TTC
(22,50 € HT)

Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4

Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...

€12.60 TTC
(10,50 € HT)

Cylinder - front or rear copper seals kit for one wheel - VLR Delahaye

Set of 2 seals for hollow screw and banjo (for 1 cylinder)

€4.08 TTC
(3,40 € HT)

Cylindre frein 25.4 mm - entrée 11mm cone entrant (7/16e) - SAMBRON transporteur à benne

Cylindre frein  25.4 mm - entrée 11mm (7/16e) cône entrant -SAMBRON transporteur à benne Pour permettre le raccordement sur une canalisation avec un embout conique femelle, ajouter pour chaque cylindre : 1 x adaptateur avec cône sortant: 1 x ...

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 3/8 UNF Male - 10x100 female

Copper gasket 12 x 18 mm

Copper gasket 12 x18 x  1.5mm thick

€1.80 TTC
(1,50 € HT)

3/8 - 24 f copper pipe fitting

Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm

Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm

Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

Mâchoires SAMBRON

Intervention main d'oeuvre - adaptation - nettoyage