Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck

Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck

€79.20 TTC
(66,00 € HT)

brake hose P5P5 380 mm - hydrovac 404

Brake switch - STOP - spring-loaded

Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.

LEFT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

LEFT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

€61.20 TTC
(51,00 € HT)

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

primary brake cable 230x82 cm with eyelet

total length 230 cm - sheath 82 cm - with starting eye

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

primary brake cable 182x125 cm with caliper

total length 182 cm - sheath 125 cm - with starting bracket

Brake cylinder - Front - 31.75 mm - Peugeot J7

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

wheel side brake cable 384 x 76 x 76 cm

Total length 384 cm - 2 x 76 cm cables - with centering bracketConnects the two rear wheels

Front brake cylinder 31.75 mm - SAMBRON

Front brake cylinder - Ø 31.75 mm - Sambron

€52.80 TTC
(44,00 € HT)

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.