Cylindre frein 25.4 mm - entrée 11mm cone entrant (7/16e) - SAMBRON transporteur à benne

Cylindre frein  25.4 mm - entrée 11mm (7/16e) cône entrant -SAMBRON transporteur à benne Pour permettre le raccordement sur une canalisation avec un embout conique femelle, ajouter pour chaque cylindre : 1 x adaptateur avec cône sortant: 1 x ...

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Belt 17x969 mm

Belt :Width: 17mmExternal length: 969 mmInternal length: 900 mm

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

Front cylinder - VLR DELAHAYE

" Front brake cylinder. D 1" "1/4 (31.75 mm). Fits vehicles from July 54 but can be fitted on ALL models. Advantageously replaces cylinders in 1'1 / 8 (before 06 / 1954). More efficient braking. Sold individually (1 cylinder per wheel). Entry ...

€50.58 TTC
(42,15 € HT)

brake hose B3P5 300 mm

brass banjo + hollow screw Vedette 1949

Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m

Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm

Rouleau étanchéité

Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

Hollow screw set 12x100 + banjo 3/8 + 2 seals + contac stop + drilling modification

Set of 10 hollow screw set 12x100 + 3/8 banjo + 2 gaskets + stop switch + drilling modification

Front brake cylinder rebuild kit 31.75 mm - VLR DELAHAYE

Front wheel cylinder repair kit, with pistons and spring. (For one wheel)Diam 31.75 mm

€27.00 TTC
(22,50 € HT)

Brake line - from 51 to 99 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.

Tailor-made brake hose D13+7/16e male Long 400mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.