Double circuit master cylinder Saviem Sg3 and derivatives

Double circuit master cylinder Saviem Sg3 and derivatives

€644.40 TTC
(537,00 € HT)

Front cylinder - VLR DELAHAYE

" Front brake cylinder. D 1" "1/4 (31.75 mm). Fits vehicles from July 54 but can be fitted on ALL models. Advantageously replaces cylinders in 1'1 / 8 (before 06 / 1954). More efficient braking. Sold individually (1 cylinder per wheel). Entry ...

€52.80 TTC
(44,00 € HT)

Adapter connection 1/2 UNF female - 3/8 UNF male

Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads

Belt 17x969 mm

Belt :Width: 17mmExternal length: 969 mmInternal length: 900 mm

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Ecrou

Brake line - from 100 to 150 cm

" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€2.16 TTC
(1,80 € HT)

Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4

Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...

€12.60 TTC
(10,50 € HT)

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€144.00 TTC
(120,00 € HT)

LEFT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

LEFT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

€61.20 TTC
(51,00 € HT)

RIGHT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

RIGHT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

€61.20 TTC
(51,00 € HT)

copy of 3-way 3/8 24 f connector

3-way 3/8 connection 24 threads - generally at the outlet of the master cylinder

7/16 banjo fitting + 7/16 hollow screw + seals

7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm

Custom brake hose D13+7/16e male Long 320mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.