7/16 banjo fitting + 7/16 hollow screw + seals

7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm

Required for 44mm or 1 3/4" brake cylinder

Repair kit for one 44mm rear wheel cylinder includes:2 steel pistons, 2 cups, 2 dust covers, 1 springKit for one cylinder.

€108.00 TTC
(90,00 € HT)

Maître cylindre SAMBRON

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

brake hose P5P5 380 mm - hydrovac 404

Cylinder - front or rear copper seals kit for one wheel - VLR Delahaye

Set of 2 seals for hollow screw and banjo (for 1 cylinder)

€4.08 TTC
(3,40 € HT)

flexible sur mesure type S14 S14 – 500mm

Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4

Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...

€12.60 TTC
(10,50 € HT)

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€144.00 TTC
(120,00 € HT)

Raccord 3 V - 2x1/2 - 11/16 - occasion

frais nettoyage + ré-emballage suite produit monté ou sachet ouvert

Brake reservoir with nipple + contact

Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level

Custom brake hose D13+7/16e male Long 320mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.85 TTC
(1,54 € HT)

Rear brake cylinder - VLR DELAHAYE

" Rear brake cylinder. D 1" "(25.4 mm). Mounts on all models. Sold individually (1 cylinder per wheel) "

€52.20 TTC
(43,50 € HT)

Brake line - from 51 to 99 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.