Brake reservoir with nipple + contact

Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level

Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4

Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...

€12.60 TTC
(10,50 € HT)

Bague cuivre pour mâchoire Citroen

1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€142.80 TTC
(119,00 € HT)

brass banjo + hollow screw Vedette 1949

Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m

Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck

Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck

€78.00 TTC
(65,00 € HT)

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Front brake cylinder 31.75 mm - SAMBRON

Front brake cylinder - Ø 31.75 mm - Sambron

€83.40 TTC
(69,50 € HT)

Custom brake hose D13+7/16e male Long 380mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Image not contractual.

Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

brake hose P5P5 380 mm - hydrovac 404

Rouleau étanchéité

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm