Maitre cylindre SAMBRON type sed

Rouleau étanchéité

Tailor-made brake hose D13+7/16e male Long 400mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.

Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

Cylindre 44 ref 621 002

flexible sur mesure type S14 S14 – 500mm

LEFT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

LEFT rear brake cylinder 20.6 mm - Renault 4 CV - 02/56 to end

€61.20 TTC
(51,00 € HT)

Regarnissage sangle de freinage 400 x 38 mm - unitaire

€102.00 TTC
(85,00 € HT)

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€144.00 TTC
(120,00 € HT)

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

frais nettoyage + ré-emballage suite produit monté ou sachet ouvert

Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm

Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Canalisation Ø 6.35 mm bocal vers maitre cylindre - 0.5m - avec 2 raccords 1/2 mâle

Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...

Required for 44mm or 1 3/4" brake cylinder

Repair kit for one 44mm rear wheel cylinder includes:2 steel pistons, 2 cups, 2 dust covers, 1 springKit for one cylinder.

€108.00 TTC
(90,00 € HT)