Adapter connection 7/16 male - 1/2 female

Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle

Rouleau étanchéité

maitre cylindre pour liquide LHM - Manitou MT425CP

Maitre cylindre SAMBRON type sed

modification cylindre avec piston alu creux 14mm

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Ecrou

Adapter connection 7/16 UNF female - 1/2 UNF male

Adapter connection 1/2 UNF male - 7/16 UNF female

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Pipe Ø 8 mm from reservoir to master cylinder - 1 m

Brake line remanufactured upon request, exclusively in 8 mm diameter copper.Photo not contractually binding. Supplied WITHOUT fittings - you can order the one you need from our store (for the master cylinder side). The other end is bare (inlet on ...

Front brake cylinder rebuild kit 31.75 mm - VLR DELAHAYE

Front wheel cylinder repair kit, with pistons and spring. (For one wheel)Diam 31.75 mm

€27.00 TTC
(22,50 € HT)

Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

Rear brake cylinder rebuild kit 25.4 mm - VLR DELAHAYE

Repair kit for 1 rear wheel cylinder 25.4 mm. Supplied with pistons and spring.For all models.

€26.22 TTC
(21,85 € HT)

Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm

Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)