frais nettoyage + ré-emballage suite produit monté ou sachet ouvert

Brake cylinder - Front - 31.75 mm - Peugeot J7

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Master cylinder 25.4 mm - VLR DELAHAYE

" Complete master cylinder for Peugeot 203 Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "

€64.80 TTC
(54,00 € HT)

raccord bronze 2 x 1/2 ref Kevin

Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck

Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck

€79.20 TTC
(66,00 € HT)

Custom brake hose D13+7/16e male Long 320mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Brake switch - STOP - spring-loaded

Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.

Front cylinder - VLR DELAHAYE

" Front brake cylinder. D 1" "1/4 (31.75 mm). Fits vehicles from July 54 but can be fitted on ALL models. Advantageously replaces cylinders in 1'1 / 8 (before 06 / 1954). More efficient braking. Sold individually (1 cylinder per wheel). Entry ...

€53.40 TTC
(44,50 € HT)

Cylindre frein 25.4 mm - entrée 11mm cone entrant (7/16e) - SAMBRON transporteur à benne

Cylindre frein  25.4 mm - entrée 11mm (7/16e) cône entrant -SAMBRON transporteur à benne Pour permettre le raccordement sur une canalisation avec un embout conique femelle, ajouter pour chaque cylindre : 1 x adaptateur avec cône sortant: 1 x ...

Rear brake cylinder rebuild kit 25.4 mm - VLR DELAHAYE

Repair kit for 1 rear wheel cylinder 25.4 mm. Supplied with pistons and spring.For all models.

€26.22 TTC
(21,85 € HT)

Brake line - from 51 to 99 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Rouleau étanchéité

travaux divers