copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(180,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(137,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(91,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(72,00 € HT)
copy of Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(46,00 € HT)
Brake line - Ø 4.5 mm - 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 4.5 mm.
(35,00 € HT)
Segment Set - 64 mm - 2.5x2.5x2.5x4 - Peugeot 201
Segment Set - 64 mm - 2.5x2.5x2.5x4 - Peugeot 201
(125,00 € HT)
Gear control kit - Peugeot 404
Gear control kitPeugeot 404 from 10/1966 to end of series
(50,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Cooling There are 23 products.
Cap for heating flow diameter 8 mm
Rubber stopper for starting on water pump - 8 mm
(2,08 € HT)
Cap for heating outlet ø 16 mm
Rubber plug for heating outlet on water pump or radiator. Delivered in ø 16mm by default (also available in 14 or 18 mm, just specify when ordering)
(4,00 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
(10,00 € HT)
Dynamo belt for Simca Versailles Chambord
Dynamo-water pump-crankshaft pulley belt.
(22,00 € HT)
Ford Vedette large model radiator cap
Radiator cap, large model. For radiator neck approx. 66 mm Valve diameter approx. 49 mm
(35,30 € HT)
Ford Vedette Simca V8 Calorstat Thermostat
" Thermostat for cooling circuit. For V8 Vedette Ford and Simca Versailles, Chambord, Vendôme, Monte Carlo etc. (Two thermostats per V8 engine). Sold individually. "
(20,00 € HT)
Heating departure 16 mm for hose
Departure to equip a standard hose in the model with departure for heating.Diam. 16 mm
(23,50 € HT)
Heating valve controlled by cable Ø 16 mm
Heating valve controlled by cable Ø 16 mm. Synthetic material (no corrosion problem)Length connection end to other: 91.5 mm
(49,00 € HT)
Heating valve with lever Ø 11,8 mm
Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm
(20,83 € HT)
Heating valve with lever Ø 16 mm
Heating valve with lever Ø 16 mm. Synthetic material (no corrosion problem). Length connection end to other: 113.5 mm
(26,00 € HT)
High hose for Simca Versailles Chambord
High hose for V8 Simca Versailles Chambord etc. (2 per engine) Sold individually. Diam 40 mm (elbow side) - Diam 35/40 mm (straight length) - Straight part length 580 mm Elbow length 130 mm. Approximate values
(54,40 € HT)
Radiator cap small model Ford Vedette Simca
Radiator cap, small model. For radiator neck approx. 56 mm Valve diameter approx. 39 mm
(27,88 € HT)
Simca Versailles Chambord water pump plate
Closing plate for water pump housing. Current manufacture in synthetic materials with carbon reinforcement - very solid - no corrosion possible. Mounts in place of the old one.For Simca Trianon, Versailles, Régence, station wagon Marly 1 and 2, ...
(75,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Temperature manometer with probe - ivory background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(65,00 € HT)
Water plate gasket for Simca Versailles Chambord
Plate seal behind the timing cover
(8,30 € HT)
Water pump repair kit - Simca Versailles Chambord
Repair kit for water pump Simca Versailles, Chambord, Marly etc.Includes a bearing axle + sealing ring ("cyclam"). It is advisable to rectify the seat on the body (glass) before fitting a new rotating joint. Refer to the technical review for ...
(148,64 € HT)
Water pump turbine - Simca Versailles Chambord
New aluminum impeller, machined in the mass, for water pump V8 Simca Versailles, Chambord, Aquilon type engine.Very neat French manufacture.
(141,20 € HT)
Ø 16 mm purge te for heating or cooling circuit
Ø 16 mm purge te for heating or cooling circuit
(17,50 € HT)