Cylindre frein 25.4 mm - entrée 11mm cone entrant (7/16e) - SAMBRON transporteur à benne
Cylindre frein 25.4 mm - entrée 11mm (7/16e) cône entrant -SAMBRON transporteur à benne Pour permettre le raccordement sur une canalisation avec un embout conique femelle, ajouter pour chaque cylindre : 1 x adaptateur avec cône sortant: 1 x ...
(48,00 € HT)
Adapter connection 1/2 UNF male - 7/16 UNF female
Adapter connection 1/2 UNF male - 7/16 UNF female
(9,96 € HT)
Brake master cylinder Ø 31.75 mm - Peugeot 202 UH
Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH
(119,00 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
7/16 banjo fitting + 7/16 hollow screw + seals
7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm
(27,95 € HT)
FLEXIBLE 17MM - 3/8 24F - LONG 320
(29,50 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Hollow screw set 12x100 + banjo 3/8 + 2 seals + contac stop + drilling modification
Set of 10 hollow screw set 12x100 + 3/8 banjo + 2 gaskets + stop switch + drilling modification
(645,00 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck
Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck
(65,00 € HT)
Copper pipe fitting 7/16 - ext thread 11mm
Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm
(5,20 € HT)
brake hose B3P5 300 mm
(29,50 € HT)
Custom brake hose D13+7/16e male Long 380mm
Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Image not contractual.
(35,00 € HT)