Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€144.00 TTC
(120,00 € HT)

Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4

Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...

€12.60 TTC
(10,50 € HT)

Divers

Produit divers

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Front cylinder 31.7 mm - HOTCHKISS ARTOIS 864

" Front brake cylinder. D 1" "1/4 (31.75 mm). Sold individually (1 cylinder per wheel). Entry 7/16 - provide 1 seal 025153 + 0225154 "

€52.80 TTC
(44,00 € HT)

Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.

Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Remise en état lot de pièces spécifiques

Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm

Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)

Rouleau étanchéité

Front brake cylinder 1"1/4 - 31.75 mm - 7/16 - SAMBRON

Piston diameter: 31.7 Housing length: 68 mm Distance between mounting holes: 36 mm Hydraulic inlet thread: 7/16UNF

€52.80 TTC
(44,00 € HT)

raccord 3 voies 3/8 bicone + vis cresue 10x125 + 1 bouchon 3/8

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Double circuit master cylinder Saviem Sg3 and derivatives

Double circuit master cylinder Saviem Sg3 and derivatives

€644.40 TTC
(537,00 € HT)